![Kyle Johnson](/img/default-banner.jpg)
- 96
- 121 890
Kyle Johnson
United Kingdom
เข้าร่วมเมื่อ 20 ส.ค. 2015
Modifying cars and learning as I go.
Trial and error with some trial and success.
Subscribe and come on this journey with me of making cars better in my opinion
and lets have fun on the way and keep trying new things.
Trial and error with some trial and success.
Subscribe and come on this journey with me of making cars better in my opinion
and lets have fun on the way and keep trying new things.
24 hour Fiat Panda 100HP transformation
In this video we completely transformed this fiat panda 100bhp
new headlights coilovers sun strip wheel centre caps fog lights even the aerial!
#FiatPanda
#CarModification
#100bhp
#CarTransformation
#CarMods
#EngineUpgrade
#Customization
#carenthusiast
#slammed
#low
#modified
new headlights coilovers sun strip wheel centre caps fog lights even the aerial!
#FiatPanda
#CarModification
#100bhp
#CarTransformation
#CarMods
#EngineUpgrade
#Customization
#carenthusiast
#slammed
#low
#modified
มุมมอง: 1 798
วีดีโอ
Corsa C common fault fix *rocker cover gasket*
มุมมอง 6974 หลายเดือนก่อน
Today, we're tackling a common issue with the Corsa C - replacing the faulty rocker cover gasket. This video is me removing and replacing the rocker cover gasket on your Corsa C, a typical problem that can lead to oil leaks and engine performance issues if not addressed.
More FIRST CAR mods and common fault FIX
มุมมอง 67811 หลายเดือนก่อน
Modifications for the CORSA! Subscribe for more mods to come and hit the like button to help the channel grow and make the mods bigger and better each time! #cardetailing #carcare #corsac #carcleaning #carwash #motorcare #detailing #vehiclecare #carcaretips #carcleanse #autodetailer #opel #Modifying #bestfirstcar #modded car
Corsa C Lowering Before and After: You Won't Believe It!
มุมมอง 2.3K11 หลายเดือนก่อน
Corsa C Lowering Before and After: You Won't Believe It!
Mazda RX8: Wide Body Attempt! Rocket bunny widebody
มุมมอง 3.7Kปีที่แล้ว
Mazda RX8: Wide Body Attempt! Rocket bunny widebody
Corsa C gets its first Mod! | Wing Mirrors |
มุมมอง 1.3Kปีที่แล้ว
Corsa C gets its first Mod! | Wing Mirrors |
370z gets new exhaust. Sounds so much better
มุมมอง 888ปีที่แล้ว
370z gets new exhaust. Sounds so much better
Bringing the CORSA C back to life *with a good detail*
มุมมอง 6Kปีที่แล้ว
Bringing the CORSA C back to life *with a good detail*
Lowering the RX8 with MaxPeedingRods *coilovers*
มุมมอง 1.3Kปีที่แล้ว
Lowering the RX8 with MaxPeedingRods *coilovers*
Custom Audio and Air Ride Boot Build: The Ultimate Showstopper! | in under 10mins
มุมมอง 2.8Kปีที่แล้ว
Custom Audio and Air Ride Boot Build: The Ultimate Showstopper! | in under 10mins
Audio Boot Build & AIR Suspension setup FINISHED
มุมมอง 1.3Kปีที่แล้ว
Audio Boot Build & AIR Suspension setup FINISHED
Wrapping | not as easy as it looks | DIY car wrap |
มุมมอง 563ปีที่แล้ว
Wrapping | not as easy as it looks | DIY car wrap |
Audio Boot Build & AIR Suspension setup PART 5
มุมมอง 182ปีที่แล้ว
Audio Boot Build & AIR Suspension setup PART 5
Boot Build & AIR Suspension setup PART 4
มุมมอง 371ปีที่แล้ว
Boot Build & AIR Suspension setup PART 4
Boot Build & AIR Suspension setup PART 3 (HARD LINES)
มุมมอง 685ปีที่แล้ว
Boot Build & AIR Suspension setup PART 3 (HARD LINES)
Boot Build & AIR Suspension setup PART 2
มุมมอง 257ปีที่แล้ว
Boot Build & AIR Suspension setup PART 2
Boot Build & AIR Suspension setup PART 1
มุมมอง 305ปีที่แล้ว
Boot Build & AIR Suspension setup PART 1
FIXING the OMP and taking the *RX-8 LIMP MODE RESOLVED*
มุมมอง 7Kปีที่แล้ว
FIXING the OMP and taking the *RX-8 LIMP MODE RESOLVED*
I found Rust on the car but I can’t weld!
มุมมอง 295ปีที่แล้ว
I found Rust on the car but I can’t weld!
How to SPLIT RX8 taillights and modify them.
มุมมอง 2.7Kปีที่แล้ว
How to SPLIT RX8 taillights and modify them.
I brought an Abandoned Rx8! Can’t be that bad?
มุมมอง 447ปีที่แล้ว
I brought an Abandoned Rx8! Can’t be that bad?
Installing a VERY cheap spoiler *GT WING*
มุมมอง 694ปีที่แล้ว
Installing a VERY cheap spoiler *GT WING*
Painting the callipers on my Nissan Cube
มุมมอง 332ปีที่แล้ว
Painting the callipers on my Nissan Cube
You got a speed demon there Jeff
Hey! yur steering wheel is on the wrong side! (LOL)
Ahaha!! Where you from mate? I couldn’t imagine driving the other side ahaha
@@kylejohnson370z I own two Cubes, 2010 here in USA. I bought them used for about $5500 each with about 50,000 miles on them. I think I got lucky. I can't imagine ever removing the seats for detailing as shown in your video.
Ohh right so are they the new that come in both side drive! And it wasn’t to bad mate easy to do and very satisfying after
Thanks for the video really helped me out fixing my stepdads car would have been lost without this !!
Glad I could help mate!!!
Isn't a panel filter better than air intake on diesels cars? I heard complete intake doesn't make much sense and make it lose a bit of power
I’m no expert mate but it sounds better looks better and in the long run won’t need to change the filter just clean it
@@kylejohnson370z yeah It sounds better for sure, I've just heard that the panel seems a better solution for diesel, while the intake Is better for petrol. Both can be cleaned with air
@@IceBullet67 fair enough mate I will look in to it if I work on a diesel again not sure I will be any time soon though
Awesome build dude !
Thank you mate!!!
Sounds good bro love my zzz
Thank you mate I’m happy with it!
@@kylejohnson370z love my zzz too I have a convertible one and love it
you put the front springs on the back and the backs on the bronts
Yo great vids so far! Are you going to do an air filter change? Maybe full induction kit??
Thank you mate!! I was going to but the car is now sold
Only 326 bhp?
It’s around that yes
Lol real
Lookin good lads! Not so big on the abarth makeover people give them but this works Will we be seeing it at some meets as the year goes on?
Thank you mate!! I think your right it’s been done nice! And you might see it at some places!!
@@kylejohnson370z banging stuff 😎
Nice work mate. After watching yours and Jessie’s black corsa c mods and messing around I’ve bought the same £400 for a corsa 04 plate 1.2. Taken the side strips off mine might be a idea on yours? Pain in arse but looks abit more sportier . Some good content
Thank you mate appreciate that! And ohh yhh nice they are cool little cars and I was going to do that but the car is now going mate but there will be a new car coming after it!!
Im first
❤❤❤❤❤ that’s a big 😮 difference 👑👑👑
Thank you bro!!
That can't be right. The fender line looks so very, very wrong. The front piece is supposed to attach to only the front bumper too. Wtf?
I know mate I thought the same thing! I will make it work tho ahaha
th-cam.com/video/7u5UBINM_qc/w-d-xo.htmlsi=RAwqTd23sNYtOyk6
Fill your tires before measuring. Pro tip.
You do realize that the pandem widebody is for the newer gen rx8 se3p right?
Not a clue mate but it all seems to be matching up well
@@kylejohnson370z well the differences between the 2 are pretty minor, its just the fender size thats a bit off just like bumper and hood, but as i said its just minor differences
Nice one mate! Its going ok so far but I appreciate you telling me
My kit just came in and I didn't realize till I tried to fit it on. I'll be sending it back haha
Thanks for the vid, but why, its a diesel, the overriding sound is of a tractor😂
Just a little upgrade and it’s been remapped now it’s running nice and it nippy
Tidy lad, come do mine now
We’ve missed you
Hopefully will be posting more from now on
What check engine light did it throw on for you?
I can’t remember the code mate I think it was p16 something
@@kylejohnson370z ok, would it turn on and not go past 2k rpm?
@@raulrios3832 Yh mate could drive and run just in limp mode
Was the car smoking ?
@@oshawnygrant3730 no mate
U are Shokunin!! If I try it, I will make many cracks...😅
I did the same!!!!
Nice mate, what thickness and wood did you use?
I’m sure it’s 12mm mate
brother, do you have link i want to buy for my baby :D
What?
widebody kit @@kylejohnson370z 🤣
@@kylejohnson370zhe asking you abt the widebody kit , link to that website
I’m confused, the car with an exhaust and remapped makes less power than standard?!
They only make 225ish from standard mate
@@kylejohnson370z a 370z makes 332hp standard
@@RiperSnifle you looking at the nismo one mate?
@@kylejohnson370z nah haha Google it! Some places say 323 some places say 332, but still, that’s a base model. A nismo makes 350 … that’s why I’m confused haha, I don’t understand how with a freer flowing exhaust it makes less power than stoxk
Diesel motors for trucks and buses dude why would you buy such car, at least delete cat and put downpipe
Where you from buddy? Here they are massive mate and they make good power but you are right in my eyes this is not my car I have a 370z and an Rx8 😜
we have the same first and last name 💀
why do we have the same exact name and why do we both have an rx8😭
No way! What are the chances ahaha
how you finding them? looking to replace my OEM bilstein suspension on my R3 soon they decent on the road?
I find them ok mate I’m at the lowest so you can imagine what it’s like but I do recommend them
Not bad for a first try...keep at it,and get it like you want
Yh man I will keep trying ahaha
Thanks for the video
Hope it’s helpful mate
@@kylejohnson370z yes on with this should be done tomorrow
Why would you do this and not get it remapped as well,as you change its dynamics ?...
It has been remapped I got it done the week after
Hardlines look sick 👌
Cheers mate!!!
did the stock sway bar links end up fitting back in place?
They did I haven’t had any issues with them either
Bro keep making Progress with your RX-8, I'm A Big Fan of RX-8... so I'll Subscribe you... but pls make more progress I always waiting for it... I hope your Channel can be Grow as big man... Good luck for u
Thank you bro appreciate the support and the views mate I will be making a video on it again soon just things have got in the way but it will be back shortly!!!
Hello bro where did you get that?
EBay mate
Brilliant mate, looks great
Thank you mate!!
Thanks for your video. I am doing my studies as I've just bought my 2nd RX8. Been a few years. Picking her up tomorow :)
No problem I hope you don’t have this problem
I think I got lucky. I bought it sight unseen for about 3k USD. 6 port, 6 speed. Last owner had it for about 17 years. Drove it about 400 miles home and had no troubles thankfully. Ran great.@@kylejohnson370z
oh god all those tiny crawling things! That thing needs to be fumigated!
Испортил машину
Not the car....just side panel...could always get another stock side panel,and start over,or leave it stock.
Should be mineral oil only
Before you weld that in. First buy the wider wheels . You might need to take more material out to make the wheels fit
Thank you mate!!! I’m gonna cut the rear first so can check all wheel spect
@@kylejohnson370zyes please do. I have heard that with wider wheels you are going to hit that piece you want to weld to. Keep up the build
Chemical guys pads...the hex ones ... never let me down
Thank you mate I will check them out !!!!
You should have never put full synthetic oil in your rx8 unless you are running Sohn adapter.
I will look at getting that for it!!!
@@kylejohnson370z I want as well but it's expensive shipping from Hungary
@@TheAzimvs yes that is alway a problem shipping is the worst!!
anyway you know how to test the OMP? Mine is in limp mode and I replaced the OMP with one from Ebay and still stuck in limp mode. It is also now throwing a code p0506. Not even sure it is the OMP at this point
I don’t know how to do that mate I just no it was in limp mode the code I got was omp so I got a new one then only changed the sensor on it there is a full video on my channels mate it might help
@@kylejohnson370z Ok, nice maybe I will try switching the sensors out from one to the other and see if that does anytthing. Not showing a code for the OMP it may not even be the issue. Just heard that 90% of the time that causes limp mode
Hey bro I was just wondering If you had to adjust the black switch or You just replaced It and put It in a similar position to the one you took off, or you changed the front cover with the sensor without taking It off. I’d appreciate your reply a lot I’ve been wanting to change that sensor and keep the omp but I’m not sure what the exact position is for It. I’ve seen similar sensors like TPS (Throttle Position) and they have to be adjusted. Sorry I’m asking too much 😁 but Honestly I’d be happy to hear how you did It bro. Thanks 🙏
Thank you for the comment mate to me it doesn’t matter where the black bit is because it can only go on one way then line the holes up so it will move where ever it’s lined up anyway mate so just get it on and turn it to line the holes up that’s all I did
Alright @@kylejohnson370z I appreciate your response. I have my 8 running normal But since months ago It seems like the oil consumption is “cero” and as the omp works mechanically I’m trying just to keep It but I’m not sure what the issue could be. I don’t have a code and I replaced the lines and oil injectors too When I start the car I can see oil going through the lines (bcuz the lines are empty still) but suddenly It stops pumping 😢 … Anyways I’ll keep trying to fix It. Probably If I get that black sensor and replace It or maybe the stepper motor. Thanks 4 letting me know ✌️🫡
Maybe I am missing something how do you release and disconnect the grey OMP connector.
With a little flat head mate that’s how I did it
Испортил фонарь =)
What was wrong?
It needed a new omp there is a video on it on my channel 😁