วีดีโอ

Nice video I appreciate it

Most helpful

Just recently got one of these, so thank you for the awesome tutorial!!!!

You lost me with the mm measurement. 😟

Appreciate it bro

Great breakdown and commentary. Just picked up a defender series, mossy 500 might take a backseat for a while

Manual says don't drop pin.

*I have a question* Got mine used and the firing pin is the same as in the video but won't go off, pull the trigger enough and change the angle and it will. Would a 3.5" firing pin fix this?

Uh huh, yeah, "a lot of pressure." Little mufucker just shot across my room. Spent the last 15 minutes looking for it lmao

Thank you just got mine today so excited

What kind and how often should I oil the exterior barrel? It seems to absorb the oil. Mine has the matte finish Thanks

I have a brand new Remington 870 field master I have only shot 7 target loads through it and I went to clean it and the patches keep on coming out a brown color and I let the break free clp set for about 25 minutes and I repeated this for 3 times and they are still coming out brown I used the bronze brush in between the patches and it doesent help but I looked inside the barrel with a bore light and it looks completely clean

Where is this??

I got One for Christmas I haven’t use but do I have to clean it first? The cabelas guy tell me every gun has to be clean before use or maybe he was just trying to sale me a 140$ cleaning kit

So I have a Pietta single action Colt army clone and it has an actual firing pin on the hammer. I’m having a problem with the bullets sliding backwards while in the cylinder and then the cylinder gets stuck after firing and trying to turn to the next round but it can’t cause one of the bullets slid backwards. how do I stop that from happening?

You are not good at this! Background noise. You never mentioned clearing the gun. "Hoopies" ? "Dirt" ? Which way do you run the brush and patches through? What about the trigger mechanism? What about the cartridge tube? For those of you wanting to learn how to clean a Lever Gun. THIS IS NOT IT!

Right off the bat, you're wrong. First thing you do is make sure the gun isn't loaded. You wouldn't believe the number of people shot with an "unloaded" gun.

What part of Northern California i grew up in lake don pedro

Do you ever load 230 gn extreme bullets with titegroup if so how much powder?

Hoopy's. LOL

I’ve always had nothing but problems getting the bolt back on the pump. I think “a bit finicky” is a understatement lol

I'm getting one as a Christmas gift to myself. Thanks for posting. You can't beat the price and quality of this gun not to mention that make left handed ones for people like myself who have limited choices.

Where the cleaning

amateur ,show us how to take out the ejector gunsmith. lol

Title should be ''disasembly'' and not ''cleaning'' because no actual cleaning was performed.

You don’t need to move the barrel around to see the hole in the link where the slide stop goes. The slide stop does not need to be pressed really hard to go in; if it slips, it will leave a nasty scratch in your slide. If you have it in the right spot, it will simply snap in.

Bună ziua de pe ce sait să comandă șocuri externe pentru armă wincester sxp pompă cal 12?

Great video! I have the Marine Defender and this is completely relevant to the build on mine. Thanks for the great pointer on getting the firing assembly back on. Saved me a lot of wondering about that.

Thank you very much ! I was never happy about the way I used to clean my Big Boy. Before watching your video, I thought it was too complicated to disassemble the bolt for a good breechend cleaning, so I used Bore snakes and pushed brushes trough the muzzle end... and was never completley satisfied with the results. Thanks again !

very helpful sir thank you so much ❤

Magnum primers in a 45?

I can’t get the bolt out? I’m pushing the firing pin down but it still just won’t slide out? Anyone else have this problem?

Great video, the guy that replied that he didn't here. The cap threading getting the clicking sound. I wouldn't shoot that gun. Cause the thread's Could possibly be damaged. I would have it checked out by gun Smith. I own 2 of these shotguns, a short one and a long 1. And you should be here in those threads lock on that Spring cap.

Hoppes...not hoopies.....and that thing you talked about that looked like tweezers is your ejector/extractor......lol....

Nevermind I twisted the part that holds the spring 180* so all good. Great video. Thank you.

I’m not getting that clicking sound when I tighten that final mart to hold the barrel in place.

I have this shotgun and its been a good one ive had it for 11 years

All videos I find show people cleaning the 357 ones and they pull the bolt out.. and then say the 45 colt ones are a lot more difficult... Why?

is the sear spring has relation to light primer at 6.38 minutes???????

what a cute lil guy

Show more shotgun in the range 😊

I just received the exact same rifle from my uncle. The first thing I asked was "how the ef do you clean this thing?" Thanks for the video, it will be tremendously helpful. BTW: I have big fat fingers, which make it difficult to get into some of those smaller areas in the breech with hands and a rag. When I bought my MP5 clone, I also picked up a set of plastic tools for removing car trim. These are great because they're sturdy plastic that won't scratch or damage metal, or finishes, and they contour in many different shapes to help get into those odd spots that your fingers can't. Highly reccomend.

I'm just getting into firearms. I have that same cleaning kit and went to clean my 9mm but there's no 9mm brushes or swaps. What caliber in there works? Is it .38

Just picked this up, would you suggest oiling the action before taking it out for the first time?

I just got the sxp black shadow and i love it👌

Cleaning a clean gun... Hmmmm. Might have been more helpful to show proper lead removal and burn ring removal on a dirty revolver.

Before you attempt to remove the mainspring housing, depress the trigger so the hammer is not under tension! This will release the pressure on the mainspring. By the way , Springfield no longer uses a capture pin for the mainspring causing reassembly very difficult! When I called them they said, “ We thought we don’t need that part anymore”! You can’t put a capture spring in because the parts are proprietary dimensions and are not milspec! Be aware!

I will concede that the SA is the best out of the box 1911 "mil-spec" out there. Problem......having the "best" 1911 is analogous to crapping the best smelling turds. Yes, Matilda. 1911s do, in fact, SUCK.

inadequate equipment and incorrect disassembly sequence

🇪🇨🇪🇨👍🤝