วีดีโอ

Plug in just the fab power and not the RGB

Ganun din sakin sir. Tapos sa compressor nanggagaling yung ingay. Pinalitan ko yung pulley pero di nawala meaning hindi bearing yung sira. So pinatingin ko na sa mekaniko ko, sabi nya flapper valve na daw ng compressor yun tapos papalitan na sa next ac cleaning

@@procrastinate2059 a ok sir salamat sa info at video mo god bless

sir ganyan din ingay ng compressor ko, magkano inabot

Thanks for the comment sir, my mechanic advised that it was actually the flapper valve of the compressor that is making the noise. I will have to replace my compressor on my next ac cleaning per his advise.

Hi, I still use this mouse whenever I work away from home. The mouse wheel has no issues, works like a typical mouse. I hope this answers your question. Thanks!

@@procrastinate2059 thanks 😊 sir!

I didn't mention anything about replacing the magnetic coil. Only the clutch and pulley. I think there is another snap ring for the magnetic coil. Just take it out, then the coil will come off. Thanks for watching!

Nad-DIY lang ako boss. Mas maganda po siguro kung dadalhin sa gumagawa talaga ng AC. Salamat!

@@procrastinate2059 sayang boss mahal kasi singilan sa ac shop,pati freon papabayaran

@@constructiontalkph may mga shop kasi sir na puro palit compressor agad, pero meron din naman mga shop na willing mag replace ng ganyan. Hanap ka lang sir

@@procrastinate2059 sana meron sir, salamat!

Nakabukas po ba AC nung umusok? Kung oo, baka possible po. Pero mas maganda na po sana kung patingnan nyo para sure sa root cause.

Yes. Just the usual left and right click plus the side keys for back and forward. I use it for work and works ok on games as well.

Sa Lazada lang boss since lockdown nung time na inayos ko. Ito yung url nung binili ko for 2012 na vios. Check mo na lang store nila kung meron pang superman (vios 2015): www.lazada.com.ph/products/i413192645-s1007416223.html?urlFlag=true&mp=1&fbclid=IwAR1tuQire7gQtkNcxsxNQJyBxfTesHW4HomBWYmv9IZNUFMBCmBWwE3MOUg

Hi Surekha, it is not necessary. You can just pair it using your laptop's bluetooth. If your computer does not have bluetooth, then you can use the dongle.

@@procrastinate2059 thank you 😄 Is there any tip to switch from bluetooth mode to USB mode?

@@surekhapalla7707 It has a button below the scroll wheel to switch to either the dongle, BT device 1 and BT device 2. It has a light indicator to show which device your are supposed to be connected to.

Thanks for nice video sir. Is there any issue with scroll wheel? Do reply. I am planning to purchase.

@@suhailanjumabdurraheemsayy7639 hi, scroll wheel is fine. But I was not able to switch from bluetooth mode to USB mode. Hence returned it.

Hi, yup it is aRGB for 5 fans and is included in this 2-fan pack

Sorry, this is just a spontaneous video before using it for my work. I'll try to see if I can make another video of this product. Thank you.

@@procrastinate2059 Hello. Is it a silent mouse?

I answer myself: no, it is NOT a silent mouse.

Hi sir, medyo marami kasing possible causes yan kapag maalog yung makina pag umaandar yung compressor. Possible na nag-aadjust pa lang yung makina sa load, pag later on ganun pa rin, try mo siguro tanggalin yung battery for a few minutes para magreset yung ecu. Or baka spark plugs din? Lalo kung matagal tagal ka nang di nakapag palit. Or pwede ring may engine mounts ka na punit na kaya maalog pag mabigat load ng makina. Or baka yung sa compressor mismo yung issue. Yan yung mga maiisuggest ko na pwede mong ma-check. Good luck po.

The feet is made of plastic but it looks durable. It is good for sitting but I guess chair with included back pillow is a bit more comfortable. This is subjective though.

Yup PU leather sya. Tingin ko yung init similar lang sya sa ibang office chair. Kung wala kang aircon may tendency talaga na pawisan yung likod mo pag nakasandal ka ng matagal. Pero maganda tong chair na to. 7 months na sya sakin pero wala pang kahit anong sign na masisira na. Yung panther chair ng pinsan ko after a few months medyo wobbly na.

I haven't tried using the rgb controller to be honest since I plug the fans on the argb port from my motherboard. But it is most likely going to work if the plugs on your rgb fans fits into the deepcool rgb hub.

Yes it is. I sit on it all day for work and play. I don't think there's any plywood.

Yes it is still comfortable despite not having a back pillow. I bought a pillow but a bit too big so I didn't use it. So no pillow is ok, buy I guess it will become a little more comfortable if there is a small pillow for your lower back.

Hi, I weigh around 135lbs. My weight doesn't push the gas lift down. I have other family member who are heavier and sat on the chair without having issues with the lift either

@@procrastinate2059 thanks

Under the boottom nothing or plywood?

Around 13 inches from the floor to the bottom part of the chair.

@@ryandean4772 Just foam underneath

@@procrastinate2059 thanks

Hi, I'm only 5'3. I have a chubby 5'7 cousin who said that he was able to sit comfortably in this chair. The seat is approx 16-inches wide if that helps.

Yup it is A-RGB so the plug is only 3-pins like you describe. So yeah, it is 5V. I think the RGB 12V version is called RF140 if that is what you are looking for.

It is but it feels solid.

It does not include any of those, probably because it is one of the cheaper models.

Depends on where you’re going to use it. I work from home and play games afterwards so I spend most of my day in front of the computer. For me this is worth it since I spend most of my day sitting in front of the computer and I would like to feel comfortable as much as possible without spending too much.

I think your chair is not available here in my country since this is the only NEX Series chair that I saw from the store I bought it from. Based from the pictures of the white NEX chair I saw, the entire chair is stitched with leather unlike mine which is a combination of fabric and leather. So, with that and the color and cushions, I don’t think there are any other differences. And since they are from the same series, then they probably used the same materials for the wheels, armrest, foam, etc. Regarding your question about comfort, the foam is soft which makes it comfortable. Though I find the backrest not sufficient to relax my back so I have to buy a separate lumbar cushion. I don’t find the headrest cushion necessary at moment unless I try to use my chair for napping, I guess. Hope this answers your questions. Cheers!

@@procrastinate2059 Thanks for your answer! I appreciate it!

I think it is. It is not wobbly like the other cheaper brand that I have tried. The build quality is good as I don't hear squeaking sound from the metal parts. I think it is well designed since they placed fabric on the parts of the chair where synthetic leather would easily crack. Aside from not including any cushions, I think this is really good.

@@procrastinate2059 how bout the armrest height? Does it reach the table level when it is adjusted to max?

@@WastingDrip Both the gas lift and arm rest can increase its height by 3 inches each. On the lowest position, the armrest's height is 23 inches. By using the gas lift and adjusting the height of the armrest, it can go up up to 29 inches.

Sadly, it doesn't include any. Probably because it is one of their cheaper gaming chairs.