วีดีโอ

I probably accidentally fell in there when filling the plastic bags with organic dirt. Sh*t happens.

Doesn’t OMRI certify it?

Wow.. l actually, a few years ago used some old guttering for my lettuces and small aloe vera plants and a few herbs..it works great

Wrap wet towels around it, wrap around the full height with a black tarp, and keep it damp in the sun. The water will transfer into the strains, and black tarp will retain heat. Steam bending timber is easy to do.

Beautiful turkeys

I'm trying to find the best solution right now for my post. I know this was a long time ago but what I'm going to try is use a steel angle 2 x 2 x 1/4 along a good portion of the post so as I screw it in, it pushes against the bow and hopefully aligns it.

I didn’t have any foreign material in my bag thank goodness. I mixed mine with worm castings, bio char and a lil bit extra perlite.

To take the pressure off the quick connect and the hoses turn off the the pump(shut off the tractor/step on the clutch and then move the control valve forward and back to relieve the pressure in the hoses and you won't loose any oil. LL&P

Whaat a waste of time listening to this guy talk! Terrible video!

Wow Tia! 😂 so cute, looks like you guys are having fun!

😂😂😂

🐐

What you end up doing? My gate post is bowed now. I tried to work around it but I think imma pull it and resink it

Why are you using temporary fence post for a long-term situation?

Cow jumscare

3/4 in. FHT x MHT Brass Hose Bibb with Anti-Siphon Vacuum Breaker This is all u need

Your check valve is bad on your well if it's sucking back through the hose

Just get a water trough check valve. Theyre like 15 bucks a tractor supply. Just clips on the side of the trough and you can just leave the water on. Itll shut iff once the water line hits the check valve and you dont have to worry about the hose falling.

Cows like, "Sup."

Siphoning from a trough back to your well, I hope you have lots of anti diarrhea pills.

Your well has a bad foot valve?

Not a well. A frost proof hydrant.

Use an electric hand planer.

Beautiful ❤

Beefy looks like a soccerball

I think you need more

Unleash the Burbon red

Agreed, cheap tester but better than nothing.

Cheap tester. Unfortunately they are all Chinese cheap junk unless you have a fluke or a really nice field piece. But those aren’t specifically for fence testing. It’s picking up the magnetic field that all electric produces, even us! They call it an aura in humans!! But it’s just holding the first reading which is the magnetic fields from the fence. Really interesting that you figured that out, I can see where it would save a non electrician a lot of diagnostic tests and avoid replacing parts that are still functional. Really cool and interesting observation. Thanks a lot for sharing with us!! And the goat was definitely trying to see the screen on the tester to know if he had a chance to get out and go find a date for the afternoon 😂😂

He looked at you at the end

Looks like a farm to me!!! They all look happy too.👍

Will it work for Cannibus

the m pump does not have the pressure to run the splitter get a pto drive system it will work great also the cyl on splitter is bnot big enough in dia need 4 in 24 stroke

Don't think an H belly pump will generate enough pressure to operate a wood splitter - unless you're splitting balsa wood. Typical operating pressure on a wood splitter is 2000 - 3000 PSI (I think). The electric over hydraulic might do it, depending on how much pressure it'll generate, but I don't know how many cords of wood that little battery-powered motor will split. Just get a splitter with engine and hydraulics all set up. You'll spend double or quadruple the amount on this arrangement, and it still won't work.

What a waste of fucking time

You talk alot about nothing. Get yourself a PTO gear pump and a reservoir.

I have the same problem for my shed. Bought them at HD (4x6) and sunk them in the ground with concrete. The corner one is bowing to the south presumably due to sun drying. If they are juicy at the store, do not buy! Got to dig it out with a backhoe.

I'm building a 4 rail ranch fence, and the first post I put in a month or two ago is visibly warping. Another in the middle of the span is now bowing forward about 3-6 inches from the line I pulled between corners. I put every post in as straight as I possible with a bubble fence post level and they are all off now to some degree. Its unbelievable. Bought them at HD.

Just roll the key to start position and release, it'll start

You should try to contact the people who you bought it from , and find out if it ever worked when they designed it. But I noticed that there isn’t any filter so it’s possible that if the cylinder seals are deteriorating the line can get plugged where the ports are smaller. But I would work backwards starting at the cylinders and see if you have flow ! 😀🇨🇦

I'd be around those dirt mounds with a metal detector.. never know what you will find...😆

What’s a praperdee ?

When wood splitter is hooked up your handle to chistmas tree valve,lol,determines which way you want the splitter valve to work and leaving your tractors hydraulics on either way dont matter,the splitter valve has a bypass which lets it circulate when not in use then you engage the splitter to control the splitter. I run mine all day long and never turn the hydraulic off on tractor. When you have the loader hooked up,try holding the control one way and pushing or pulling the tractor control the other way at same time,it should just reverse it,far as preasure on lines when hooking something up,just shut tractor off and then work all controls and it should relieve the preasure on lines

Works great, if you need to see on the barn roof.😂

On second thought, Must be the junk red tools you use.

You have seen a bowed 4x4 at my farm. And you seen that I put a large amount of weight on it. It took a full year to get SOME of the bow out. Just replace it!!!!!!!!!!!

If the 4x4 has dried out and warped as far as it will go I would use this idea to level the 4x4. I would take and unfasten the exterior that is fastened to the 4x4 that is out of level and shim the exterior to level. Then I would use 2x6s or 2x8s for my door jamb on each side and top piece setting each side level.

Bet that felt so nice haha

Too cute

They are not as dumb as people say they are!!!