- 10
- 67 885
Just Fix It
เข้าร่วมเมื่อ 4 ต.ค. 2021
Subaru Crosstrek/Xv | How To Remove Your Car Carpet - Detail
Subaru Crosstrek/Xv | How To Remove Your Car Carpet - Detail
years 2012 - 2017
---------------------------------------------------------------------------------------------------------------------
Tolls you need:
* Ratchet
* 8 mm socket
* 10 mm socket
* 14 mm socket
* Philips screw driver
--------------------------------------------------------------------------------------------------------------------------
#subaru #subaruxv #subarucrosstrek
years 2012 - 2017
---------------------------------------------------------------------------------------------------------------------
Tolls you need:
* Ratchet
* 8 mm socket
* 10 mm socket
* 14 mm socket
* Philips screw driver
--------------------------------------------------------------------------------------------------------------------------
#subaru #subaruxv #subarucrosstrek
มุมมอง: 3 047
วีดีโอ
Hyundai Terracan - How to install AVM locking hubs
มุมมอง 9K2 ปีที่แล้ว
Hyundai Terracan - How to install Avm locking hubs. ‐ ‐ tolls you need: 8mm Allen socket torx T15 AVM 443 locking hubs if one of the hub bolts are ruined - this is the part number - 51715H1000 or 51716H1000 -‐
Hyundai Terracan - Steering wheel & Air bag removal - Step By Step
มุมมอง 6K2 ปีที่แล้ว
Hyundai Terracan - Steering wheel & Air bag removal - Step By Step I have changed my steering wheel in my 2005 Hyundai terracan and i want you all to know that you can do it yourself to! Tools you need: Ratchet Impact wrench 22 Mm soucet t40 torx If you like this video please subscribe
How to change your EGR - Hyundai terracan 2.9
มุมมอง 23K2 ปีที่แล้ว
How to change your EGR step by step - Hyundai terracan 2.9 tolls you need: 1. 12 mm soucet 2. Ratchet set (if you have small ratchet it's better) 3. ring ratchet set 4. small flat screw driver EGR manufacture number - 28410-4X410 Gasket manufacture number - 0K551-20319 (you need 2) Before you replace the EGR, check your vacum line, myabe alll you need to do is to change the line...
How To Change Fuel Filter - Hyundai Terracan 2.9 CRDI
มุมมอง 19K2 ปีที่แล้ว
How To Change Fuel Filter - Hyundai Terracan 2.9 CRDI What tolls you need? * 12mm socket * Ratchet Fuel Filter - Manufacturer Part Number : 31390H1970
How To Replace Cabine Air Filter - Hyundai I30 GDI
มุมมอง 1662 ปีที่แล้ว
How To Replace Cabine Air Filter - Hyundai I30 GDI ‐ ‐ it's simple and easy! you have all the information in the video! tools you need - two hands:) ‐ ‐ please like and subscribe:)
How To Replace Engine Air Filter - Hyundai I30 GDI 1.6 2015
มุมมอง 2902 ปีที่แล้ว
How To Replace Engine Air Filter - Hyundai I30 GDI ‐ ‐ it's simple and easy! you have all the information in the video! ‐ ‐ please like and subscribe:) ‐ ‐ tolls you need - only two hands 🙌
How To Change Engine Oil And Oil Filter in Suzuki Alto - Maruti K10b (1000cc)
มุมมอง 4352 ปีที่แล้ว
Enjoy my friends 😀
Hyundai Terracan Engine Air Filter Replacement (2.9)
มุมมอง 2.1K3 ปีที่แล้ว
Hyundai Terracan Engine Air Filter Replacement (2.9) Very simple and easy job! Tools you need - Just two hands! The Air filter Serial is - 28113 - H1915
How To Change Your Engine Oil And Filter In Hyundai Terracan 2.9 Diesel
มุมมอง 5K3 ปีที่แล้ว
You have all the data in the video enjoy and share!
Hola y la egr no se podía limpiar?
Just asking, why you put an oil on the filter? Please thank you.
Sin musica por favor..
The clock spring can be repaired too! Excellent 👍
Well that was what I needed to know, thanks! Can't believe what a pain it is to just peel the carpet back a bit to get at the parking brake grommets...
Здравствуйте, учите мат часть, егр для охлаждения на холостых оборотах.,
Where are you buy the steering wheel?
Thank you for saying you can tighten the filter by hand. 👏 I hate it when people work on their own cars and think they have to tighten the filter and drain plug so hard they almost burst a vein in their head 😅 My last oil change to a car (Volvo V70) took me 2 days because someone had decided to tighten the drain plug with an impact wrench 🤦 and round off the bolt in the process. I had to eventually use a drill, welder, counterscrew extractor and pneumatic impact wrench as my battery powered 400Nm rated wasn't enough 😂 Anyway, good video, nice job 👌
Thank You!!!
😊😊
Showing which way the pipes won my like and subscribe mate 👍
Great video.... thanks for sharing and helping us terracan owners 🙏🙏🙏
Thankyou for this video...iv own a Terracan....this video is ❤❤
Hola cuál falla presentaba
Black smoke error.
Thanks for video....nice keep uploading more😊
Excelente video , gracias por compartir
Hi there from Brazil...I am just about to buy one, automatic. How is it going so far with yours own? Is it an easy going car if you're easy on the drive? Cheers!!!
Lleva la atorica que no se le ha puesto
I just finished a build on my crosstrek requiring all carpet removed, this viedo was incredibly helpful thank you for taking the time to put this together. I also enjoy the light hearted music
great
Thanks for the vid. How long did it take overall to get it out? Then how long to get the new one back in. Thanks!
Please be careful not to over tighten the fuel sensor screw.
ТАК ЭТО НЕ ДАТЧИК УРОВНЯ ТОПЛИВА А ДАТЧИК ВОДЫ В ТОПЛИВНОМ ФИЛЬТРЕ
hello .... do they work? in what percentage, 100%? at what speed do they risk breaking point?
They work amazing.. 100% there is no connection to the breaks..
Thanks
Отличная работа, продолжай выкладывать такой контент !!!
Excelente
Not so bad idea is lifted front of the car and remove all old oil. Good job.
что это?У меня нету такой заглушил
что это?У меня нету такой заглушил
Very good master
Why is it convenient to mount them?
You put locking hubs when you want to keep your drive shaft, axle berring and more. When it on 2×4 those parts are not moving.. Just when it on 4x4 it's engaging.
@@justfixit5718 OK thank you . These hub locks don't take out the vacuum motor, right? If I understand correctly, I also have the possibility of driving with reduced gears only with rear wheel drive, I hope I have not said bullshit ...
@@gs6273 There is no connection to the vacuum pump. When you put the mode on a 4X4 in a car, you must put a 4X4 at the locking hubs. If not, the differential will work but will not transfer the power to the front wheels. You should know that once you are in 2X4 mode in a Hyundai terracan (in the car) you are in rear-wheel drive. You can change gears regardless of front / rear drive
@@justfixit5718 Hi ! After AVM assembly, can I drive with the AVM 4x4 blocked, but I have 2H on the knob?
@@adammotomaniak7312 Of course you can :)
excelente video, yo puse los mios de mitsubishi pajero comprados por aliexpress y han salido buenos
Mitubishi pajero, l200 and hyundai terracan is the same locking hubs. Great to know that aliexpress sell them and they work good 😀
@@justfixit5718 si, son una copia exacta de los AISIN, SON IDENTICOS Y YA LOS HE UTILIZADO BASTANTE, SOLO HACE FALTA UN BLOQUEO DE DIFERENCIAL PARA QUE MI TERRACAN SEA UN MONSTRUO
Para que sirve
Great job, did you replace the egr any specific reason? Please gv a detailed account.
I did it because black smoke came out from the exhaust. When I checked the Egr it was stuck. So I had to change it. No more black smoke from the exhaust . :)
Se podrá limpiar la egr
Blanked of my egr ages ago, and egr cooler at back of engine
Was there EGR fault code? For this you had to check using diagnostic scanner.
Great and clear video!
5w40, thats good oil. And for this oil change we need 6Litre. 6,5 is too much.
it's depends on the weather in your country... I recomennd to put 6 liter and then to cheak with the dipstic :)
Any plan on doing an how to change the gearbox/diffs oils? 😬
gear box :I will do it with the filter six months from now.. diffs oil: three months from know :)
Thanks!! I just bought a 2002 2.5 Terracan and it would be great if you do more maintenance videos. Greetings from Costa Rica.