วีดีโอ

It was an experiment using a Resincrete and bismuth powder mix cast slip ring to try and decrease the friction experienced by the magnet that is spinning in the core of the machine.

That is exactly what it is, this is why I am currently exploring various different materials for the lining of the core.

@@merkabaenergy9558 Wouldn't it be better to try to prevent the spinning object from contacting the walls in the first place? Pull a vacuum on the core and use field effect sensors to modulate electromagnets to levitate the spinning object to remove most friction, should be able to achieve much higher speeds and make it *way* more dangerous.

As Shawn said in his comment "The magnetic lines of flux rotating at unimaginable speeds may lead to new understandings of magnetism and electromagnetism." as it may well be, "warping the very fabric of space-time"

Apparently, "magnetism itself doesn’t elongate in a literal sense, as magnetic fields are not physical objects-they are a force field generated by moving electric charges or rotating magnets" like the one in this system. However, I understand where the question is coming from and I doubt the standard model if I am honest! What might be happening at high frequencies, or high rotational speeds of the magnet, is a change in how the magnetic field behaves and how it's distributed.

@@merkabaenergy9558 Blasphemy! You dare doubt the standard model! Lol. I doubt the standard model, too. I don't believe in consensus science. My youngest daughter is a mathematician and physicist. While working on her PhD thesis (she mastered it), she would tell me quantum mechanics was full of math tricks and assumptions stacked upon assumptions. She told me not to throw out the baby with the bath water. In many instances, the standard model works. Buuuuuuuttttt, there are a lot of holes. I'm no physicist, and my math skills are atrocious, but the standard model feels like a dead end. It seems that the bigger the particle accelerator, the smaller the discovery. Lol. I think you suggested that at high rates of spin, the two poles may blend together or become indistinct. Are you observing signs of a monopole?

I’m still searching for an ideal material for the slip rings, which are designed to fit where the Neodymium sphere makes the most contact at its equator. So far, I’ve experimented with carbon filament PETG, bismuth powder in ceramic, clear SLA-printed versions, and most recently, 3D-printed resin infused with PTFE powder. My next attempt will be using polymer clay mixed with micronized WS2 (tungsten disulfide). I also plan to try combinations of PTFE powder, bismuth powder, and WS2 in the polymer clay. As for the fabric of space-time, we affectionately refer to the MerKaBa machine as the TARDIS. I appreciate your mention of flux lines because a question that has been on my mind is what exactly the magnetic field is doing at such high speeds. Are the poles merging? Is the Bloch wall being stretched or amplified?

@@merkabaenergy9558 There is so much good information to contemplate. I wish I had the answers to your friction challenges. When I served on a US Naval Destroyer, I was responsible for the ship's gyrocompass. I remember that a small beryllium sphere was at the system's heart and spun at 27,000 rpm. Have you googled beryllium gyroscopes? Here is another dumb question. Have you considered placing Hall effect sensors to take Gauss readings during changes in rpm? Or maybe Gauss meters can be used to take readings at critical points around the spinning sphere? I appreciate your content and sharing this journey of discovery. When I observe your Merkaba in action, it feels like anti-gravity, time travel, teleportation, etc.

@@merkabaenergy9558 your 3d printing skills are next level!

@@merkabaenergy9558 Are you looking for low dielectric loss and low permittivity? Please forgive my 20 questions. I have the attention span of a fruit fly.

@@shawncalderon4950 I appreciate the compliment, but I’m far from that level. The sphere coil form you’ve created is what I consider next-level work-I wouldn’t even know where to begin with that! My polymer clay approach is much more hands-on. I’ll be rolling out the clay using a pasta machine for consistent thickness, then cutting it into three squares. I plan to dust the surfaces with powder (think sandwich!), reroll, and repeat the process multiple times. Once I feel the mixture is adequately blended, I’ll use a press-fit mold to shape the slip rings before baking them for final curing.

Since the start of this journey, I've noticed that the MerKaBa has naturally influenced my design choices. While I'm deeply fascinated by sacred geometry and everything it represents, I'm particularly drawn to how these shapes interact with both the visible and invisible realms. These ideas truly ignite my imagination and keep me moving forward.

@@merkabaenergy9558 Well put. I do believe there are nuggets of discovery to be found in the dark caves of sacred geometry, but only from a purely naturalistic point of view. It doesn't mean I deny the metaphysical. It's the word “sacred” that leads to conclusions that run contrary to my Christian faith. I do believe science has missed the forest for the trees. That geometry is brimming full of invention. Possibilities that are too big to fit into the small-mindedness of today. And our ancestors knew something about 4-dimensional space and matter that has yet to be rediscovered. If someone speaks of “sacred geometry” and means “historical geometry” or “ancient geometry,” then I burst with creativity and activity. But if one hitches their wagon to religious connotation, then I must bear to differ. I appreciate you sharing and listening.

I find it fascinating how our interpretations of sacred geometry differ based on personal beliefs. For me, aside from the MerKaBa-which appears in the Bible and was a major influence on my journey-the term 'sacred geometry' doesn't have a religious connotation. Instead, it represents a sense of wonder and mystery about the deeper, unexplored patterns of the universe. I firmly believe geometry holds untapped potential and may contain insights our ancestors had only begun to uncover. This is reflected in my particle simulations, where the particles naturally form the shape of the MerKaBa, driven purely by the simulated forces of octahedral windings. Exploring these ideas unlocks endless possibilities for creativity and discovery. I truly appreciate the chance to exchange and discuss these concepts with you.

I did notice sometime ago, by using one of those EMF meters that the longer the machine was on the field could be picked up at further and further distances, maybe I should revisit that soon 🤔

@@merkabaenergy9558 thats incredible

Time will tell

well so far carbon fiber PETG, Bismuth Ceramic and cast bismuth have all not worked fingers crossed for either the 3D printed SLA clear resin or the resin mixed with PTFE powder 🤞

it does get a bit nerve wracking at times!

Thank You, I am trying to rein myself in and move on with one aspect at a time, otherwise it all becomes to much for my tiny brain 🤣

Its coming.

@@merkabaenergy9558 I'm subscribing right now to be notified

Thanks Shawn that means a lot from a fellow builder 🙂I don't know the speed though Shawn, I have seen a video or two on analysing the signal to work it out, I tried in the past to use a Laser Tachometer but when you put a mark on the sphere it wears off almost immediately 😒

@@merkabaenergy9558 That makes a lot of sense. I never would have guessed that a spinning sphere could take off marks in a few seconds. Have you considered a reed switch? I have used them in the past, and they work well. I used glass reed switches. Thank you for your kind words. It's wonderful to come together to share ideas and grow.

Have you seen this video before? It gives some insights into your area of research regarding Spherical Coils! th-cam.com/video/E-AQf4uR_Bw/w-d-xo.html

@@merkabaenergy9558 I haven't seen this video. Thanks for sharing; I'll definitely watch it!

Hi Shawn I just subscribed to your channel, where are all your videos? 🤔

@@merkabaenergy9558 Hi, Merkaba. I'm honored that you will subscribe to my channel. I did not want to start my channel until late September or early October. Then, Nathan threw me into the deep end of the pool…lol. He started my TH-cam channel without my noticing. I appreciate Nathan’s enthusiasm, but I'm still ordering equipment, cameras, microphones, a USB-C hub, etc. I'm unsure if you have seen my two presentations on Nathan’s channel. That's as far as I have been able to make progress. I am getting exposure to the TH-cam universe. Your inventions are inspiring. Your videos are exciting and informative. I will put a description on my channel informing subscribers that I will be delayed in starting my channel, and I appreciate their patience. Cheers friend!

@@shawncalderon4950 I saw one of your presentations on Nathans channel. I love the sphere, years ago I was thinking of wrapping spherical coils around the magnet but I think it would just cause the magnet to slow and the coils to get hot, but the Telsa Calderon Sphere that is unique and very cool, I would love to see the cad files for the coil forms you printed.

I’ve seen some of Dan’s work, and he’s definitely fascinating. When it comes to red mercury, if I were to experiment with creating it, I’d explore combining ground cinnabar crystals with liquid mercury, as they share a chemical connection. Liquid mercury has unique physical properties, such as high density and conductivity, which make it intriguing from an electrical standpoint. Its ability to conduct electricity efficiently and its interaction with magnetic fields could potentially enhance the energy transfer when combined with cinnabar, which is rich in mercury sulfide. Crystals, in general, are known for their ability to manipulate energy, and we use them frequently in electronics to store, transfer, and filter energy. Cinnabar might add a stabilizing or amplifying effect due to its crystalline structure. Combining these states-liquid mercury with the solid cinnabar crystal-could create an interesting synergy between their electrical and magnetic properties, possibly yielding something novel in terms of energy manipulation or conductivity. I feel their complementary natures could lead to beneficial outcomes in this type of experimentation.

@@merkabaenergy9558 amazing knowledge, i will be following you along your journey! looking forward to future uploads and hope to see you on the live stream with Nathan again soon

Humans during ancient ages Use to fly all over the WORLD... Japanese text mentions ...one of the Japanese king use to go on the MOON with his wife's and childrens for vacation...and return back to the earth Chinese text mention similar events of people's flying out side EARTH...In the space and return back safely....

I wish I knew how and a good deal more finances

Hi 😀, No these aren't charged particles, the description in this version of the video explains it, th-cam.com/video/vHBut3rWJuA/w-d-xo.html

Thank you for your comments ❤, I really do appreciate the ones that are made with some real insight 😊, I actually have attached a diametrically magnetised ring magnet to the prop shaft of the RC motor, please go and join the FB page I would love for more people to get involved.

What a bout to placed two large permanent magnets - one below the mercury in tube and second over it to generate the spin of the mercury by magnetic field only. If it will work - place small pads inside the tubing to capture energy of spinning mercury which will cause spinning of whole tube....attach it on the shaft with classic el. generator....would it work? If I would have equipment I would love to try...

Like Capital domes, have copper pillars, wound into a coil, surrounding the moving Mercury. That would convert magnetism to electrical current.

Mercury ‘eats’ copper otherwise I would use it, also copper would stress the motor as it is diamagnetic, and would slow the spin of the magnet 🧲

When You Know You Know 🤓

@@merkabaenergy9558 magnetically coupled resonance. Add some of that in the fields within the structure. Cover it with a reflection bell. Feed that back as well.

The reply from the heavens requires a strong listen for the return to glisten.

Find the base elements amongst precipitates. Adorn the crown with the noble to shine down. ✨️ diodes and rocks set to a clock. Poisson distribution swirling building blocks. Faster it goes, then diamagnetic loc

Light Order Continum

where can we get in touch? I have an FB group you can contact me there if you like?

Get a ∆aleth.. hand size one... When you do. Hit me. This is going to totally blow your wig back.. piYahmids.. Babylonianized as pyramid.. get an acrylic or stone. Doesn't matter. They all work... Found who built them Why are there piYAHmi∆s in Spain Portugal Timbuktu, China, Russia, & in Peru, 2 seen as Mochu Pichu, Mt david pronounced properly is ∆uau∆, DaH ooD..... ∆ U ∆🤔 Yahua∆ah Southern Kingdom worldwide Poor human behavior is due to beLIEf....note Z, LIE... MEMORIZE∆ the Asareth Ya'∆ibrot 🟦🟦 10 COMMAN∆MENTS 🤔❤work in your FAVOR 👊 YOUR AUTOPILOT BEGINS FUNCTIONING... The SowEL require, the Memorization, = assimilation of the Bio~Linguistic 🟦🟦program, that the Asareth is. Such provide our subconscious {backup system storage}, has the capacity, to RE-MIN∆ you, of a potential Error, when you, THINK to go Astray! The REMEMBERERE∆ 🟦🟦sub-programming, will reMIN∆you not 🚫 to think upon such! LET ALONE DO IT..... THOSE PEOPLE WHO HAVE NOT, & FURTHER, REFUSE TO DO SO! ARE DEMON INFECTED...... As written: they are liars, & double minded!!!! What memorization causes The reorientation of biogenetic underpinnings of the vessel, move from being a 6🧬DNA⚛️ functioning entity, to a 9 ∆NA🟦🟦🧬SowEL Converte∆ being. The former, HUman, The Latter is EARthLing 💚🔯♾️⚛️🧬🟦🟦🔺🔯 See the city of ∆ua∆, David if you Profane.. community page location is clearly seen, & Ya∆ah Ya∆ah only Qo∆esh WOR∆S ACTIVATE US. All received the PROFANE words & names. Language is programming guven by YaH 🔯🔺...toYah profaned Torah..

Yes, Mercury spinning ✵ 卍 ✵, Mercury spinning ✵ 卍 ✵ and Mercury spinning ✵ 卍 ✵ 🤣

¯\_(ツ)_/¯

I agree.

It supposed to make a magnetic field that makes an object float?

@@baseddruid8773 No, mercury can be spun through cymatics, to induce power, power charges the high voltage anti gravity effect.

@@8thsinner Its spinning due to the rotating ring Magnet that is a Diametrically Magnetised N42 Neodymium attached to a Kyrio A2212 Brushless Motor 2200KV 🙂

@@merkabaenergy9558 Well I invite you to look into high voltage cymatics to make the mercury spin, and then put the magnet on there and see what you can pull out of it in terms of conversion to electricity.

They have discussed? Can you link I would be interested to hear in what context 😀

please share!

Think out the box read the description, no probably nothing new on the contrary an ancient idea that would do the same to mercury. HAVE A GREAT DAY

What do you mean? If you like Join the FB group and we can chat more there