วีดีโอ

Here are a few types of calandria 👇👇 1. Vertical Calandria 2. Horizontal Calandria 3. Natural Circulation Calandria 4. Forced Circulation Calandria 5. External Calandria 6. Internal Calandria If you were referring to a different type of "calandria," feel free to contact me !

5-micron cartridge filter helps improve the efficiency, lifespan, and cost-effectiveness of the RO system by protecting the membrane and other components from larger particles. Reason behind 👇 Filters with a 5 micron rating remove large amounts of debris from liquids. While there are filters with other, smaller micron ratings, filters below 5 microns are prone to intense blockage or quick debris build-up. The smaller the micron rating, the faster the filter will clog.

@@DharmrajCreation thanks very much sir

Thanks 🙏

Thanks and welcome

Nahi dear

Please call me.

Thanks 👍

Good dear 👍

🙏

Pure stem generation per video banaye sir

@@arpitkumarrai3863 Thanks 🙏

Thanks Veer ji

Thanks for visiting

Thanks dear 🙏

Thanks 🙏

Okay bhai 🙏

डिगैसर को SAC और SBA दोनों के बाद लगाने से प्लांट की दक्षता कम हो जाती है, पानी की गुणवत्ता गिर जाती है, और लागत बढ़ जाती है। सही तरीका है कि डिगैसर को SAC के बाद और SBA के पहले इंस्टॉल किया जाए ताकि प्रक्रिया को ऑप्टिमाइज़ किया जा सके। If a degasser is installed after both the SAC and SBA exchangers, several issues can arise: 1. Higher CO₂ load on SBA 2. Reduced efficiency of ion exchange 3. Increased operational costs 4. Decreased water quality

Nice explanation

RO प्लांट में एंटीस्केलेंट की डोजिंग रेंज आमतौर पर 2 से 6 ppm के बीच होती है। हालांकि, यह कई कारकों पर निर्भर करती है, जैसे: 1. Feed water Quality: यदि पानी में घुले हुए लवण, कैल्शियम, मैग्नीशियम, सल्फेट या सिलिका की मात्रा अधिक होती है, तो उच्च मात्रा में एंटीस्केलेंट की आवश्यकता हो सकती है। 2. Water Recovery Rate: उच्च रिकवरी रेट के लिए अधिक मात्रा में एंटीस्केलेंट की जरूरत हो सकती है। 3. Antiscalant types : विभिन्न प्रकार के एंटीस्केलेंट के लिए अलग-अलग डोज़ अनुशंसित होते हैं, इसलिए हमेशा निर्माता के दिशा-निर्देशों का पालन करना चाहिए।

Aapka qualification kya hai

Dear aap aeration tank ke sabhi parameters share kijiye For detailed information message me on my WhatsApp number 🙏.

Please watch this video th-cam.com/video/8ni63S62aWY/w-d-xo.html After watching this share your valuable feedback.

Hello Dear, For more clarification message me on my WhatsApp number 🙏

Kya samajh me nahi aaya

@@DharmrajCreation Sir thoda Speed jyada hai na isliye.

Thanks 👍

Shahu Ji please message me on WhatsApp for any queries.

th-cam.com/video/8X0LuMoQy0M/w-d-xo.html

th-cam.com/video/jvw_Fyzg700/w-d-xo.html

If space and budget allow, go with an 8040 membrane for efficiency and ease of maintenance.

Dear aap ka question clear nahi ho rha ki aap pucha kya chahte hai. Jayada jankari ke liye aap mere WhatsApp pe message kar sakte hai.

Dear aapke comments ke bad maximum video hindi me banaya ja rha hai.

Video banaiye

To determine the normality of a ferrous ammonium sulfate (FAS) solution, you need to know the following: 👉The molar mass of ferrous ammonium sulfate [Fe(NH4)2(SO4)2·6H2O] is approximately 392.14 g/mol. 👉The equivalent weight of FAS depends on the reaction it is involved in. In redox reactions where iron (Fe²⁺) is oxidized to Fe³⁺, FAS has an equivalent weight equal to its molar mass because 1 mole of Fe²⁺ loses 1 mole of electrons. ✅Steps to Calculate Normality: 1. Weigh the FAS: Accurately weigh a certain mass of ferrous ammonium sulfate. 2. Dissolve in Water: Dissolve the weighed FAS in distilled water and make up to a known volume (typically in liters or milliliters). 3. Determine Equivalent Weight: For ferrous ammonium sulfate in redox reactions, the equivalent weight is 392.14 g/equivalent. 4. Formula for Normality: Normality (N)= Mass of FAS (g) \Equivalent weight (g/equivalent) x Volume of solution (L) ✅Example Calculation: 👉Suppose you dissolve 19.6 g of FAS in 1 liter of solution. 👉The equivalent weight of FAS is 392.14 g/equivalent. Now, apply the formula: N = 19.6 / {392.14 x 1} = 0.05 N So, the normality of the solution is 0.05 N. ✅Key Points: 👉Use the molar mass of FAS (392.14 g/mol) for determining the equivalent weight. 👉The volume of the solution should be in liters to get the normality in equivalents per liter (N). 👉The normality is a measure of the concentration of reactive equivalents in a solution.

Dear aeration tank BOD treatment stage ke according different different hoti hai. For more clarification call or message me. Only 04:00pm to 09:00pm

Aap ka no chaiye mujhe

Thanks and welcome

Thanks and welcome

Dosing based on your wastewater COD : N: P ratio 100: 5 : 1 For more information message me on my WhatsApp number.

Thanks dear 🙏

🙏🙏🙏

Dear watch this video. Then after share your feedback. th-cam.com/video/_BFgY0_dO-Q/w-d-xo.html

Okay dear

Thanks dear 🙏

PT Plant ka Full form send kijiye.

Thanks dear

🙏