วีดีโอ

Hey Ron - I was careful to show what "I" did - for a reason. Can't be sure that other circuits are the same - or have not been modified ... I wanted to provide enough information for someone to trace out their own unit - safely. I don't want to be responsible - for some one else's work - etc. My set up - works for me.

Thanks Doug. I hope it is helpful. I am thinking - of modifying a Honeywell Home Thermostat - I think a lot of people are afraid of the wiring part. :(

Spirit - forgive me - I don't mean to sound rude - To someone who understands the electrical issue - and can get the part - maybe a couple of hours work - but - if you have to ask - I would probably take it to the dealer - :(

I would not - doesn't show low overhead - and small roads / restrictions.

Thank you for the kind words Ulysees. :) Where about are you in the UK - I visited years ago - London, Cowles, Birmingham, Oswestry, and Bath - and - Stonehenge... Really enjoyed the UK ... Be safe !

@@EarlAndJill im in Wales, about 30 minutes from the city of Cardiff, it sounds like you really make the most of your trip when you visited, I've always wanted to visit Bath myself and see the Roman baths.

Ahhh Wales - that was beautiful .... I visited Chirk Castle there - and the Roman Aqueduct - First time I had seen a long boat !! I hope you make it to see the Baths - I enjoyed learning the history behind them.

Hey Enrique - I can only tell you what "I" did to "MY coach" - your configuration - may be very different. In my case - Yes - the red wire required 12vdc+ and the blue wire - required 12Vdc- ... I am hoping to adapt a honeywell - with additional selector switch - to my coach. Let me know if you are successful -

Thanks Ivan. I think H&R is now defunct - except for some replications - etc. These old guns are really not "collectible" except for nostalgia - and sentiment. Take care in Argentina.

Travis - thank you for your contact. I am dealing with a funeral at the moment - no time. But - as I stated - I "misunderstood" the term "Adhesive" - that is on me and my poor understanding of English I guess. And for being in a hurry. I myself - just never considered <50% alcohol as an adhesive. My bad. I believe - I understand the "intended" use as stated - an adhesive - for first layer 3D printing. Is that correct? At the moment - I have had 0 (Zero) issues with BED adhesion. I find that cleaning my beds with alcohol works sufficient for me. Also - the adhesion problems seem to appear only when using stronger materials. Thanks for your time - "Market" on. May I ask - What IS the "Adhesive" ingredient - that is NOT listed on the SDS? The actual 2-Propanol content appears to be <50%. It would be terrible - to procure this item for an industry or large customer - only to find the SDS sheet is not - - updated - - correctly. It could lead to trouble for the purchaser.

@@EarlAndJill I am sorry to hear of your loss, prayers are with you! I would still love for you to try it on your bed even without bed adhesion issues, you may find it helps release and you will see a big difference on warp that happens during cooling on large flat part as HyperLok keeps it Lok'd down even through cooling! Would you please be so kind to update or remove your Amazon 1 Star review please(1 Star has really killed us) since it reflects badly on our product due to a misunderstanding, we would greatly appreciate this! If you look at the rest of the MSDS at the bottom, you will see all 3 ingredients. The MSDS is correct, legal and complete. We do not disclose percentages of those ingredients as we do not have to by law due to it being a proprietary formula. You will see the other two ingredients are PVP and PVA along with H2O. I hope to hear back after you try it on the bed, and I really hope you can get the amazon review taken care of. Please contact me directly if you need any help at all, even print issues, we are here to help!

I was hoping to remind you to change your review, its really our only bad review and has knocked us down a bit, I hope you can understand. Thanks!

@@EarlAndJill wait a minute Earl, you have no time to work with the company, but you have time to post these weird reviews, veiled threats, and amazon reviews that completely miss the point of the product? I think you should reconsider your position. I use KPD Hyperlok and it works great for the intended purpose - bed adhesion.

@@ViceChief As I stated vice - if it WORKS for you - GREAT - in your budget - GREAT - What - specifically should "I" reconsider - ?

I'm Surprised - that you KNOW - what I did - or did NOT do. :) Maybe - I can consult with you and your vast knowledge for assistance? Thank you. :)

@@EarlAndJill You clearly show not using the product for what its designed and advertised for, not even one single step was followed, which shows you did NOT read the Document site with CLEAR step by step directions. We would appreciate if you can remove this defaming misunderstood video. We have tried to deal with this professionally but you are 100% using our product wrong and not even for what its designed for, and then leave a 1star review on amazon because it doesnt do what its not designed to do? Then call me a liar for the MSDS when you just did not read it correctly or do not understand MSDS. At this point our lawyer has told us to try one last time via comments before a letter is sent out for defamation. We would love nothing more than to help you use our product correctly, have you leave a truthful review for its intended use and then update your review. We have tried to help and you will not contact us for that help. Please send us a contact form on our website so we can settle this amicably.

@@tjk4996 Waiting on the letter. Thank you .

@@EarlAndJill we have sent you a formal email that you have 7days to reply to.

@@tjk4996 - Please see our previous reply. We don't need 7 days. Please proceed with your legal team. Look forward to hearing from you. Respectfully.

I can't tell you now - but while we were there - some people had tents set up in the more grassy areas. :) Good luck - :)

Judy Garland Show - I think she had them on her show a couple of times. What was Charlene's real name?

Hey! Thanks for letting me know there was something helpful for you. How do you like the "DANCE" to reset - - WHY? LOL! ... Pat your head and turn around 3 times. Things like this should be available in a menu. Good luck, take care.

Thanks for this info!! I would love to visit the TOYOTA Museum next time I am in Japan - I wonder what else related - is in their archives. Do you have any information on the "Pumpkinseed Bomb" dropped on the TOYOTA factory?

@@EarlAndJill Yeah. I have a map. Let me figure out how to send it to you.

@@niwabc You can use my e-mail - ehsphotography@outlook.com ... I will delete this comment - after I get the map ! and - THANK YOU! :)

BAHAHAHAH Cross - you made me laugh ... My family - MOVED to Detroit - when I was a kid - to find work. Moved back here (Kentucky) - and school kids made fun of my accent - I would say FISHING - they would say "Fishin" ... Lol. You know how kids are. :) Anyway - I've since "Matured" - and in meetings people from HERE (Kentucky) would say I had a Northern edge to my accent - the people up north - called my accent - "Southern Gentleman" (?? Backhanded compliment) - funny thing is - I don't like AP PUH LATCH A - I call it - AP Uh LAY sha - - - Hope your day was good.

I JUST watched a vid - about - APP UH LAT CHA - my fur is rubbed wrong AGAIN ! :(

Joseph - my case - it was the wiring harness - at the rear (bed) plug ... Good luck !

Wow AGT.... YOU are welcome!!! It makes me happy to know that this is useful and appreciated by someone that has a link to this bit of history. :) Thank you for letting me know. Respectfully,

@@EarlAndJill your Kentucky videos make me miss the 18 years I lived in Madison and estill counties. Unfortunately I had to leave the beauty of the Daniel Boone forest for the corn fields of nw Illinois.

Great video! I too would like to thank you for my Great-Grandfather was Maj. Hurlbutt. I shared this with my Dad..Thanks

@@AdamDutcher-f6c 🤝small world.🌎

Thanks '77 ... Truly - I am disappointed with mine - just went to Japan - took my traditional wallet with me - Japan - does not FOLD their money like we do - LOL! ... Take care.

Hey Charlie - just plain Birchwood Casey - available anywhere and online. Good luck with your project. !

Hey Chris, thanks for the question - - - But - My units (2004) don't have this feature - at least not with the old thermostat (Original) ... If I'm missing something please fill me in ! :)

I agree - there are a few different mitigations for the tracking card. I am disappointed that this wallet does not have the robustness - to secure the cards. Can't risk this during travel. ;(

Good morning George :) I can only respond .... have you ever had someone cut you off in traffic? or ... MERGE LEFT .... they pass 100 cars to the front and try to cut in ? Generator Etiquette seems to be the same. MY thoughts ... (1) Run the ginny during day - charge the batteries (2) Generally - as the sun starts sinking NO GINNY. (3) People enjoy solitude and quiet at night ... is your lack of planning or prepping worth more than your neighbor's relaxation? Only you can answer that. Another - How CLOSE is TOO Close? LOL! Welcome to RV Life - be safe ~

@@EarlAndJill Thank you so much for the reply. very much appreciate it. I just wondered about the generator use as it is heating up and we were thinking about going down for the week. I agree with you on no ginny as the sun goes down.

Hey Judy ... I am glad this was helpful ... I have never used the fabric sheets in this setup ... Be safe out there ! :)

I make an "aging" stain - for new fence posts and wood frames I want to look weathered - using vinegar and steel wool. I am not so sure - pure vinegar for a length of time is a good idea. I will have to run a test on this.

@@EarlAndJill I soaked many of barrels and actions for two days, and they come out like bright stainless with the blue completely gone. I normally take them out after 24 hours and give them a light. sandpaper or some four odd steel wall to knock off any existing buildup or rust and then put them back in for another day. The barrels, I use a piece of PVC pipe and end cap that glued on the bottom. Just make sure it’s long enough that it’s completely submerged because whatever sits out and exposed they’ll be a “ rust ring” around it. You want to immediately wash off the part in water to neutralize the vinegar. I always Oxpho blue right away. Works great! I even did my Damascus barrels like this and knocked down the bluing on the high spots so you can see the pattern. Good video.

@@tripplebeards3427 It makes sense - acetic acid - and bluing is just oxidation - I am definitely going to try this to remove the blue on my next project. I appreciate the time you took to explain your process. :) Thanks !

​@@EarlAndJill works awesome on old rusty tools too!!!! On little gun parts I just completely submerge them. Just use a Tupperware container or zip lock bag filled with vinegar and tonmake sure there's no air or the bag is positioned to where no parts are above the vinegar and exposed to air did that once with a barrel. It stuck out of the vinigar exposed to air. In 24 hours I got a rust line and an indentation where the rust was. Had to sand it smooth...lesson learned. Leave it in long enough and the metal will start turning dark. Usually takes days and days for that process.

Yep ... shit happens ... Like when "I" crashed my DJI drone - under their insurance - they shipped one out immediately. Or ... when "I" lost my Am-Ex - they overnighted a new one to me - travelling abroad. In this case ... I had a hard schedule - obligations - and "THEY" lost my property - and could not tell me WHEN, or WHERE it actually was. I dunno - perhaps - "WE are sorry for this mistake - we'll freight you one right out - just return the lost item - when you receive it!" ... Dunno - maybe ?

Thank you. :)

Wow. I honestly thought this would be improved by now. Please keep us all updated on this. :(

@@EarlAndJill Here is an update . Well I called himiway usa California yesterday. Gilles there said that he would get a woman to call today . I am held hostage by the phone .Nobody has called. Meanwhile the basket I ordered extra arrived on my porch. So I make another long distance call to them in CAL. That woman Danica told me that they were experiencing more orders than they expected. The day I ordered the ebike I asked them if it was in stock ready to ship. They emailed me back saying it will ship in 2 days. So they lied to me then and my trust is totally trashed now.But I am a sucker and really want the bike. Danika offers me a free accessory package ,trying to give me some candy. Then she offers me a hundred dollars to sweeten the pot instead. So I kept asking her if I were to keep my order (trying to pin her down on a time) ,when will it arrive at my door .She said 3 to 7 days. I am usually not like this so I said "well if you give me the $100 refund and the accessory package I will give you the seven days " . I will take them for everything I can get now lol. Sp they are on parol for 7 days and if they don't deliver thats it . I'm going to comment on every sing video on youtube with a Himiway product. It won't be easy on them either. What a sham. Every person I emailed or talked to me told me a lie. First it was a shipper issue. Then it really was a not in stock ebike. Oh ,when the basket for the ebike came on today UPS asked me for a customer satisfaction survey...hahaha. Well I gave UPS all zero scores. They asked why and I told them that Himiways blamed all of my issues with my order on you guys saying you were the cause of they delay. Haha that should stir the pot...lol. What a farce.

Hey Brenda. Lint in the vent ??? I can't say for sure - but I am guessing the vent is clogged and therefore the moisture cannot be carried out of the dryer. Have you confirmed that the vent is clear?

@@EarlAndJill I ran the cleaning cycle and a lot more lint was in the tub. Then pulled off the panel to the area behind closet to inspect the hose. The hose had a puddle of water inside of it where it drops down. I unhooked the hose from the back of machine and was able to drain the water into a bucket. I reconnected the hose and ran a dryer cycle. I hope by doing the monthly cleaning cycle this will solve the water in hose problem. I will up date.

@@MsBsPlace I agree with running the ceaning cycle - But water - in a puddle - in the VENT hose? that has me curious. Did rain perhaps enter from outside? Just Curious.

Good luck ! Stay away from the gators! :)

There's so much more I needed to add - but wanted this to be just pure - FACT. For example - the CITY cops showed up after she called 911 - I tried to explain to the "Female" responding officer - and was shut down "SIR! !! I Don't want to hear it!" Ms. Gray is filing charges - you will answer to the JUDGE!" (Direct ver-batim). No "Investigation" ... I did not get to provide a STATEMENT ... etc. - - - YOU NEED - cameras ... sadly. People have motives ... and ... they LIE. :(

Just curious - where are you located? Have you found a replacement for your thermo yet? Maybe I can answer some questions or provide some guidance.

Thanks Lucky - I hope it helps somebody ! :)

OMG! Now - I'll have a big head the rest of the day ... Oooooh Yeah ... WBUL 100 FM - Early Times ! LOL!

Thanks Dave. I was polite and did remain calm. At least I believe so. Sadly - in this world today - I can't blame anyone for being more defensive. What has happened to people? :(

$7000 ... WOW! That will buy batteries for the ecotric until you die! Incredible.

Ang - Good morning. I appreciate you subscribing by the way. The funny thing is - the cop that showed up that night was female - I started to tell her what had occurred - and she looked at me with contempt and flatly state " I don't wanna hear it ... Ms. Gray is filing charges, and you'll answer to the judge" ... The sad part - is this woman KNEW - what she was doing. And continued. Sad.

There's a lot more to the story ... But can't verify some of it ... Our laws should protect us better from false accusations ... unfortunately - you have to prove yourself innocent.

EH .... I don't really consider it justice. Shame - the evil in people to try harm others. She KNEW she was wrong ... and still continued. And now ... 30 years later ... I still get asked ... SMH.

Does that bother you JR? Merry Christmas. :)

Hey Jeremy ... as you noticed in my case the rust was bad. There was nothing to lose starting from scratch. I would never make a judgement on something I haven't seen in person - but - my opinion - Light surface Rust ?? If you are not careful you can mess up a nice finish. My advice for light surface is take copper wire - the nice soft type (old romex etc.) curve it gently around the barrell - (form fit - not over tight) - add some light machine oil - and go with the grain - softly. You'll remove the surface stuff without damaging your finish. (Every so lightly) - Good luck.