- 9
- 55 290
Crane Model Build
เข้าร่วมเมื่อ 17 ก.พ. 2021
This Channel entitled "Crane Model Build" describes the 1/12th scale RC 1960s vintage P&H 1015 lattice boom crawler mounted crane model that I designed, fabricated, assembled and documented. Please comment, subscribe and/or directly contact me at cranemodel1015@gmail.com with your thoughts and questions. To view the Playlist for this model, go to
th-cam.com/play/PLwKat4ize0FuBwA8hNJoZ-4VALnrYgQKw.html
Should you own or have access to the machine tools outlined in my video entitled "Outline of the tools and work areas used to build the model crawler crane" and would like to purchase a complete set of drawings, construction photos, BOM, full size crane photos and OEM brochures, go to the following URL:
lmscnc/6342
Thanks,
Tom Garing
th-cam.com/play/PLwKat4ize0FuBwA8hNJoZ-4VALnrYgQKw.html
Should you own or have access to the machine tools outlined in my video entitled "Outline of the tools and work areas used to build the model crawler crane" and would like to purchase a complete set of drawings, construction photos, BOM, full size crane photos and OEM brochures, go to the following URL:
lmscnc/6342
Thanks,
Tom Garing
Sacramento 2024 RC Festival Model Demonstration
I had opportunity to demonstrate my model crane lifting a 10 lb Aluminum double lead screw to the top of a model 3 foot tower at the two day 2024 Sacramento RC Festival that was held recently at Folsom Lake, CA. The video was recorded thanks to Ryan @thetruckhunter
มุมมอง: 265
วีดีโอ
Making a 1960s vintage HD Mack Truck RC Model
มุมมอง 35K9 หลายเดือนก่อน
This video details how I modified a KingKong 1/12th scale RC model of a 1960s 6x6 Russian Truck into a 1964 Mack B-81ST tractor.
Loading the Model Crane into an SUV
มุมมอง 57510 หลายเดือนก่อน
This video shows how to load the model crane into an SUV
Crane Model Build Plans
มุมมอง 5582 ปีที่แล้ว
This video details the 7 GB of jpg and pdf information on how to build my 1/12th scale RC model of a 1960s vintage P & H Crawler Mounted Lattice Boom Crane that is contained on a Flash Drive and that I am offering for sale online at the Little machine Shop website. Go to lmscnc.com/6342 to view the product offering of these plans. Thank you, Tom
Dragline Model reva - 1/12th Scale Crawler Crane
มุมมอง 1.4K2 ปีที่แล้ว
This video details the research, design, fabrication and recorded operation of a 1/12th scale model of a Hendrix 3 cu yd dragline bucket set up on my 1/12th scale P&H Model 1015 crawler crane model. Please SUBSCRIBE and add a comment and/or email me at cranemodel1015@gmail.com with any questions on this or any of the other videos on this, my Crane Model Build channel. Thank you, Tom Garing
Outline of the tools and work areas used to build the model crawler crane
มุมมอง 3793 ปีที่แล้ว
This video outlines the tools and work area I used to design, make and assemble my crawler crane model and its components. To see my Playlist of you tube videos on my crawler crane model, go to th-cam.com/play/PLwKat4ize0FveGCMUfFEjLJ1cWKQt5IF4.html
1/12th Scale RC Crawler Crane Model - Transporting the Model
มุมมอง 5293 ปีที่แล้ว
This video explains how I transport my 80# crawler crane model. To see the Playlist of you tube videos on my crawler crane model, go to th-cam.com/play/PLwKat4ize0FveGCMUfFEjLJ1cWKQt5IF4.html
1/12th Scale RC Crawler Crane Model Introduction Video Update
มุมมอง 5K3 ปีที่แล้ว
Below are the timed video segments of this post: 0:00 Addition of Boom Lights 0:58 Model Crane “Walking” on Treads 1:55 Detailed look at the Model Crane’s Cab Panels Thanks for watching, my name is Tom Garing and feel free to comment, Subscribe and/or email me at cranemodel1015@gmail.com with any questions you might have on this crawler crane model and its build. To see the Playlist of you tube...
1/12th Scale RC Crawler Crane Model Introduction Video, February 18, 2021
มุมมอง 12K3 ปีที่แล้ว
Introduction to my 1/12th scale RC model of the 1960s vintage P&H 1015 Lattice Boom Crawler Crane. This 9 minute video covers the following timed video segments on various aspects of this model: 0:00 Model Intro and Operator Station Details 0:58 Onboard Switches and High Boom Power Cutoff System 1:50 Demo of High Boom Power Cutoff System 2:38 DROK onboard Battery Monitor and Counterweight detai...
Yippe
Great video. Will there be another?
This goes way beyond model building. I like your work sir. Very inspiring. The Mack is awesome. Now I want to make one like my dad drove back in the 70s. A 1978 Mack r600l oilfield winch truck with a three axle hyster folding neck lowboy. And then a D 8 cat dozer.
You can do it!
Cool stuff
Thanks Bedbears😊
Awesome Technical display, attention to detail is outstanding really cool stuff. Thanks for keeping an eye on my buggy Sunday . Are there any more local events coming soon?
Thanks Scottykardos😊
Way Cool Stuff Tom! Thanks for Recording Ryan. I'm totally geeking out! Amazeballs!
Kenny, thank you for your continued support🎉
I would love to see more of this truck!!! Mabye a full showcase??
А в якої країні робили такого тягача?
Hi Altenburg-90, I made this model in my home shop in Rocklin, California, USA.
Thanks for your positive comment 🎈
Very nice job 🔵🔵🔵🙂🙂🙂👍👍👍🔵🔵🔵
So awesome 👍
Thank you! Cheers!
Wow impressive stuff ❤
Coolest thing ever!!
Thanks for yoursupportive comment🎈Best Regards, Tom
Really good project, hope you will share more
Thanks for your positive comment 🎈 I might create a post on my scratch built flatbed trailer some time later this year. BEST, Tom
Very cool!!!!!!!!!!
Thanks for your kind comment🎈 BEST, Tom
@@cranemodelbuild3236 👍👍
😊
I have a Mack Construtor 3/4 cab with a trailer dump model I built in the late 60’s. The entire rig is maybe 20” long. Not sure of the scale. I think it was an AMT model. I assembled and gave it to my late father as a gift. He had it out for a while when new then it went into a box for 50yrs. I found it when I had to go thru his estate 5 yrs ago. Its all there but after many years passing the model glue has mostly given up. It was red, black and chrome plated styrene. It’s in really great shape aside from the glue giving up. I want to bring’er back and restore her. I am an RC guy now. I have many 1/10, 1/18 & 1/24 scale Was thinking about electrifying the model! Do you think I should keep it a static model? I am afraid one hot lap in a newbie’s hands might tear off all the nice pieces on the sides. 😢
Sounds like a personal decision. If you cherish it like you seem to, I would either "keep it on a mantle" or possibly RC it, but NOT as a BASHER or CRAWLER but rather as a limited use show model. In any case, ENJOY IT as best you see fit! Best, Tom
Cool
Thanks for your positive comment🎈
A little more weight over the front axle to help the steering!
Thanks for your observation! Yes indeed, I had not anticipated that the 20 pound trailer weight (loaded with four 3/4" thick slabs of oak model crane swamp mats resulting in an additional 5 pounds on the 5th wheel) would have such a significant impact on the model's turning ability. As my video explained, I tried to minimize the impact of the soft/grippy dually tires mounted on solid axles by lining the tires with slit lengths of 5/8" garden hose. Actually initial tests on the originally lined tires saw the sharply turned front tire wanting to fold off the wheel, so at least that outcome was avoided🎈 Best Regards, Tom
Your making life hard work pick it up! It’s a small cheap toy it’s not heavy
It is certainly not small or cheap!
good Job, well done! i've also a mack r model size 1/14 / th-cam.com/video/kpowqZ-7MTM/w-d-xo.html
You have a very good looking Mack Tractor/flat bed trailer model! Thanks for your comment🎈 Best Regards, Tom
That is so cool, i have a KK CA-30 that i made into a dump truck for our rc mining equipment when i was poor, that cheap chassis has turned out to be an absolute workhorse of our mine site, stone dead reliable for years despite being dogged on and worked to death.
also love the old school model making in this video, all my model makin is done in cad then printed out.
GROGKNAK, Thank you for your positive comments. Yes indeed, as a retired 76 year old manufacturing guy, I pretty much do everything "old school". Have a GREAT DAY! Tom
Я незнаю, что здесь от Мака часть кабины - Зил 157.
rctruckhobby9413, I appreciate your comment, but coukd not fully understand your question regarding tge cabin. In any case, have a GREAT DAY! Tom
Beautiful looking truck. Great job making it.
Donovan, Thank you for your positive comment, BEST, Tom
Beautiful B type, I've looked high and low for a similar scale Mack R type ten wheel dump truck to no avail. This base kit looks like an option, nice build.
Spenjere, Thanks for your positive comments. Yes, as I stated in the video, that is how I evolved my approach to the build after discovering the Kingkong model. Stay well and in touch, BEST, Tom
The only thing preventing this truck from appearing fully authentic and full scale is how clean it is. the detail is so complete. This is my first time visiting this site and I thank you for showing it to all of us.
Bobby Tucker, Thank you for your positive comments! I hope you had opportunity to also view a couple of my crane videos. Stay well and in touch, BEST, Tom
Great work! I wish I had one quarter of your talent
Thank you for your positive comments! Actually, while I do have talents, the fact is that many of them were learned by a combination of repeated failures and a zeal for perfection🎈
I remember my dad driving these Macks for a living . outstanding build
Thanks for sharing your Dad's experience and your positive comment Petequinn741! BEST Regards 😊
That's one awesome build! The cab looks pretty realistic as does the whole chassis. I especially like the dually-setup on the rear-axle with the larger tyres. You really nailed that classic look!
4444design Thanks for your positive comments. Yes, the tires and rims really enhance the look of the build🎈
Super 👌🏼
Thanks for your positive comment on my build!
An incredibly detailed build, and an excellent walk through of your full process. The finished truck is a thing of beauty! Major high fives to you Sir.
MysticRiverRC Thank you for your kind words. Yes, I tend to "thrive in the weeds" regarding details of this hobby🎈 Stay well and in touch...
Nice looking rig!
Thanks for your positive comment robc.5745!
Amazing 🥇👏
Thanks for the positive comment deancole4559! Stay well and in touch!
👍💪great job 👏
Thanks for the visit, Stay well!
thanks for sharing keep up the good work.
Thanks for the visit
Thank you, Stay well!
Sir, your surroundings look Utah-ish. Where are you located?
Theunfy05, While I would have preferred to have recorded the video with a better scaled background, I chose at the time, to make the recording in my central CA driveway. Tom
gefällt mir ,schöner Truck
Thank you!
Merry Christmas back to you Three Finger Joe, and Thanks for your kind comments🎈
merry christmas to you an yours stay warm an stay blessed this season, also this is awesome what a great job you did it really does look like an old mack
Ken, Thanks for your comments and Merry Christmas to you all!
Hey Tom, That was so cool to watch! Thanks for the early Christmas gift! You do such incredible work! I ended up watching it 3 times to catch everything! Dad would have been Amazed by this! Merry Christmas!
Amazing!!!!!
Thanks VIDOM803!
Amazing work on the crane, and yet another great video!!!!
Thank you so much 👍
Thanks for sharing. Nice solution.
Thanks for watching!
Very Cool Tom!
Thanks Kenny!
Please add a clamshell bucket.
Thinking about it, however, I have not yet decided how best to synchronize the two hoist drums to best avoid prematurely opening the bucket or over slacking the "open bucket" line. Thanks for you comment!
Very Neat!
Thanks for your positive comment🎈
Beautiful. I’ve always wanted to build one of these but can’t find much info.
Colossal BigFoot, Thanks for your compliment. If you have access to a benchtop metal lathe and milling machine,, you might check out my complete 7GB set of plans that are available on a flash drive offered by The Little Machine Shop at lmscnc.com/6342. Stay well, in touch and subscribed🎈 Best Regards, Tom
Good job 🎈
When’s the next video?
Not sure, particularly with the current winter weather, discouraging outside video recording of the crane model in action, but please remain subscribed and patient!
Okay! 🎈🎈
Good job pop-pop! By the way this is Kate
Thanks Kate❣