วีดีโอ

Indeed, if the prep work is done correctly (needle-scaler on thick rust/undercoat, drill w/wire brush, degrease, Metal Prep, two coats of POR-15) you'll always have great results.

Video coverage sucks

I'm in south Africa any paint center cn get it r its only u guys have it😂

As with any product you have to do it right to get a top result. Thanks.

mine didnt delaminate, it rusted through on the horizontal surfaces

Are 2 coats necessary, or will I be good with 1 only. Thanks.

Could I skim the 108B over my butt weld seams on my body work to help seal out any porosities in the welds and then put body filler over that? thanks

Can I paint over it? If so, do I sand it, primer then paint?

I have a 1956 Cadillac that I want to protect and keep beautiful... Glad to know the right way!!

Can por15 be applied over paint?

Regarding humidity: The instructions printed on the box state NOT to use the product if relative humidity is above 70%. Very useful video otherwise. Thanks.

What if it leaves the soft edge than what polished ??

I stopped using POR-15 because it’s too expensive!

its a difficult product to use, you really have to follow those steps. When you do it does work great though.

What's the chances of UPOL making a DIYer size? Blowing $52+ on a one time use is brutal for a small patch repair, like this video demo'd, and is what most DIYer's have to repair - the 21oz (600ml) can is a bit much.

Was this bi directional? They go for a couple hundred bucks now and curious if it's worth it for my small S-Series fleet (all custom, all have "quirks ")

It's hard to take you seriously when the pipe isn't rusty.

I accidently drank a couple ounces of this stuff and thinking I was going to die.....it cured my stomach ulcer!

solvent?

"U paul" 😂

In my experience, POR loves rough surfaces and will come off in sheets from smooth ones, even with the proper prep. Sandblasted metal is IDEAL.

Thanks COOP ..

I call bull shit, blasted parts, cleaned with brake clean on 80 deg. day. used clear rust came back in 6 mouths in spider vanes and keeps moving. parts never got wet. sitting a box in my shop.

so how to paint a non rusted pipe, gotcha

They work great for something no need to follow procedure. I think the amount of force on each rivet will not consistent.

Can it be applied over paint also.

Cool tool. I didn't want to spend $5k for a 1 time repair.

Does leaf springs need a top coat

I want to use Por15 to treat the rusty inside of my tractor gas tank. The only way to treat the inside surface is to pour the products through the opening. Means that its not possible to apply the two thin coats as recommended. Will this be a problem in terms of rust protection? Thanks.

Anyone who paints over rust doesnt grasp the concept of refinishing.

You couldn’t find a rusty piece of metal to demonstrate? 😄😄 impressive preparation for the video!

Not really. For years I would scrape off loose rust, wash and let dry. The 2 coats of rust converter. Next day 2 coats of por15. If exposed to sunlight I would next day add 2 coats of Rustoleum. Worked very well. Every year or two I would wash and let dry then add 2 more coats of por15. Next day 2 coats of Rustoleum on anything exposed to sunlight. I did that for about a dozen years. Never had any peeling and rarely any spots starting to rust again. Now I just Fluid Film everything. It's quicker and works very well. Anything exposed, like a bumper, gets Fluid Film reapplied every 4-6 months.

I guess the kit doesn't come with INSTRUCTIONS? haha

How much force will those handle?

Hows does it taste tho? What flavors does it come in?

I used just the POR-15 on my VW pan back in 2010. Didn’t do any prep work. Still looks amazing.

ATTN: GODLINESS IS CLEANLINESS USE THE 1,2,3... PROCESS

This MF brought out a piece of 2” emt … SMFH

So you don’t paint over rust. But over zinc. POZ 15

It works great if you follow The manufacturer directions first time I used it it worked perfect still looking good after five years

I’ve had a lot of problems with it bubbling up. I make sure to brush very thin coats but under some conditions it will still bubble up

Your pipe is galvanized….sorry but yiu could have come up with a rusty piece of metal 😂

Why didn't you use the cheap gloves provided in the kit? ;)

No Matter How U use,it it's Still OverPriced GARBAGE

That's funny, watching dude paint a small piece of shiny metal pipe, trying to prove a product folks are interested in using on a 30 year old rusty, hard to work with, truck frame 😂

Great glove to use if latex and nitrile gloves are being rationed.

Go to a JUNKYARD and get a PROPER rusty sample. That clean pipe proves NOTHING!

Can you match the color of the car?

This product is a joke!

Any particular soad to wash it with ???