วีดีโอ

Thank you so much! Yes, Freewell anamorphic adapter for Mavic Air 2. At the time there were no available ND versions yet. So all shots were filmed with MA2's fake HDR mode.

Thank you so much! Sadly TH-cam compression ruined the last shots. The church area was pitch black and I cranked up the ISO to 2000. Maybe that was too much for such a little sensor also.

@@linnankuva yes youtube compresses a lot, especially low light footage. It is what it is, most content matters!

👍@@miesto_paukstis

Thank you so much! There's an HDR version as well. It's on the Motioncams channel: th-cam.com/video/pdhPCGyPUfg/w-d-xo.html

@@linnankuva Stunning !

Hi! Yes, I did use a Movi Cinema Robot as a gimbal. The filter is K&F variable nd. I did my filter mount with a cheap eBay case for Pro-i and glued a 52mm filter adapter ring to it. Never been a huge fan of those clip attachments for phones. Now it's very handy and won't block the screen. The only downside is that the Pro-i gets overheated sooner when using a case.

@@linnankuva Thanks for the answer. I been looking into Beastgrip cage and lenses, but feel a bit overpriced compared to the competition, especially China brands, but Beastgrip have great combability with a smallrig/cage and lenses.

Terve! Ensin MotionCamilla kuvattu materiaali (container tiedosto) täytyy konvertoida rawveiksi ( joko kännyllä (hidas) tai sitten MotionCamin omalla ohjelmalla, joka on sekä Macille että Windowsille) ja esim. DaVinci Resolve osaa muuttaa raw kansion automaattisesti videomuotoon. Nämä on renderöity sRGB:nä DaVincistä ulos Proressinä ja FInal Cutilla editoitu. MotionCamilla saa myös renderöityä suoraan vaikka Proressinä tai Cineon Loggina halutessaan. Premierelle on oma MotionCamin plugari joka kuulemma lukee suoraan tuon container tiedoston. Final cuttiin on myös olemassa Color Finale Transcoder plugari, joka lukee rawwit suoraan Final Cuttiin. Mahdollisuuksia on monia. Cineon Log on 10-bittinen ja Rec 2020 HLG:ssä 8-, 10- ja 12-bittiset vaihtoehdot Pro-i:llä. En tosin vielä ole kokeillut tuota 12-bittistä. Mutta tosiaan, prosessi nyt on vähän hankala aluksi, mutta ainakin minun mielestäni sen arvoinen. MotionCamin TH-cam kanavalta löytyy vertailu materiaalia esim. Panasonic S1H:ta (6K) ja Blackmagic pocket cinema camera 4K:ta vastaan.

@@linnankuva Kiitos kommentista. Olenkin tutkiskellut tuota discord-kanavaa hieman.

@@Aarnisan Olepa hyvä vain. Discordin kanavalla onkin sitten kaikki mahdollinen tieto ja taito aiheesta. Kehittäjät ovat aktiivisesti keskustelussa mukana, mikä on hienoa. Olen siellä käyttäjänimellä Janne.

Thanks! This was my very first experience color grading cinemadng material. I'm still learning the process. I will post some more videos in the future. So far in love with this camera and its capabilities. Even Sonys native cinematography pro app is so awesome. No typical smartphone over-sharpening or tone mapping is involved.

Thank you! Yes, you're correct. The sceneries are from central Finland.

Thank you so much. Yes, it works very well. Some downsides though, the main lens can shoot only 30 fps. Tele and ultra-wide can shoot 24 fps and 25 fps only. You can record till the memory is full (a 1-minute clip on the full frame is about 19 Gb...) or when the Sony overheats... Then it starts dropping frames. On hot summer days, it's a little bit of a problem.

@@linnankuva Even using Motion Cam, it can't record 24 fps on main lens? If so, that's not good. Also, when it drops the frames, does it inform on the screen?

@@milanjani Yes, that's true, only 30fps with the main lens on Pro-i. And as far I know it's the case with all Sonys smartphones. In my opinion, you can just fine shoot everything but speech (or music, etc) and slow it down to 24/25 fps on your timeline. If you shoot sceneries and nature and so on, you hardly can even notice it's slowed down. So it's not good for interviews etc. Unless you're working on a 30fps timeline. When recording, Motioncam shows how many (if any) dropped frames there are. App performance has improved over time and it's performing very well now. It even shows on the clips playback screen where the dropped frames are with a red marker.

@@linnankuva thanks for detailed response. I think I will hold off my decision to go this route. Although future is promising..

​@@milanjani You're welcome. You can always try the demo version and see if it is for you or not.

Thank you so much ❤

Oh, thank you so much for such kind words ❤ Yes, I am working on new videos. I hope I can publish them soon. It is now autumn here in Finland and all the leaves have fallen from the trees. So it's very dark and dreary looking here right now until the snow covers the ground. But sure gonna film something winter stuff as well. All the best and stay tuned 👍

Thank you very much! ❤I'm working on some new videos that are mostly shot on a drone, but there will also be some Pro-i clips. In my opinion, Pro-i has risen phone cinematography to a whole new level. No more over-sharpening images, like iPhones and others, tend to do. And MotionCam makes it a real pocket cinema camera.

@@linnankuva Yeah fuck iphone

Thank you so much! Yes, I used a gimbal. Movi Cinema Robot, my old workhorse. I haven't made a GyroFlow lens profile yet. But I don't like it because I think it crops too much. So I prefer to use a gimbal.

@@linnankuva Thank you so much!! I also have a PRO-I so am getting used to working with MotionCam! I wished it worked with 24fps and OIS on main lens, but what can you do :)

​@@armandoragusaucy96z.71 I work on a 25 fps timeline, so I slow down that 30 fps footage for that. It's okay for shots like this and nature and scenery too. I just posted to Discord's MotionCam's Gyrochat channel and asked if has someone done a lens profile for Pro-i. No luck yet.

@@linnankuva Interesting. Lens profiles? I have to get into Motion Cam. Seems that it has a lot of potential.

@@2_Mars Yes, if you want to use a GyroFlow to stabilize your footage, you have to make a specific lens profile to match your camera. And MotionCam supports GyroFlow. I highly recommend the MotionCams Discord channel. The Developers are very helpful and will answer all your questions and there's much info for everything MotionCam related.

Thank you so much! Yes, MotionCam is superb. Workflow is a little bit hard, but I think the results are worth it.

Thank you ❤

Thank you so much. ❤ I'm still learning how to grade CinemaDNGs. I'm working on a new video. It's a lowlight test (ISO 800-1600). I was very surprised with the results. I will post that soon. Pro-i is an amazing camera and MotionCam makes it even better.

@@linnankuva Great! Keep showing up!

I agree! It's killer!! I loved the video - subbed!

Suomen luonto on kyllä niin kaunis!