- 21
- 39 866
Queets performance saws
เข้าร่วมเมื่อ 22 ต.ค. 2017
Chainsaw work , husqvarna , climbing , firewood , all things that are good
572 before and after setting squish to .026 from stock
No machining required to set the squish to .026 , all I did was remove the stock gasket then put on one that I made at .013 and the squish came out to .026 , no timing changed on my saw besides lowering it with the thinner gasket just ported for flow.
มุมมอง: 16
วีดีโอ
Husqvarna 572xp running 28” .325 chain , 9 tooth sprocket , cannon super mini bar
มุมมอง 33821 ชั่วโมงที่ผ่านมา
Imo (which ain’t nothing) running the.325 chain is a lot more better on the saw as far as it not having to work so hard , this is Stihl 23 rs full c. , the only downside is sharpening 100 plus cutters other than that it is easier on the saw cuts faster (usually) I want to get some of the new husqvarna.325 chain I hope they have a skip
Husqvarna 572 w/32” bar raining chips #husqvarna572xp #husqvarnachainsaw #portedchainsaw #chainsaw
มุมมอง 1.5K21 วันที่ผ่านมา
Husqvarna 572 w/32” bar raining chips #husqvarna572xp #husqvarnachainsaw #portedchainsaw #chainsaw
Test 572xp after setting squish to .026 (read description if you want to know more)#husqvarna572xp
มุมมอง 34221 วันที่ผ่านมา
How I got the squish to .026 was just putting a thinner gasket on it , the squish with a base gasket delete was .013 the piston was going up and down without slapping but that is way to tight so I put a .013 gasket on it and this is how it runs. No machine work no timing changes just ported for flow and thinner gasket muffler mod This was after cutting a bunch of firewood so the chain is pretty...
Husqvarna 572xp w/20” Cannon Super Mini bar , .325 .050 , 83 drivers #husqvarna572xp
มุมมอง 70621 วันที่ผ่านมา
Cuts fast af but I wish cannon would have gotten my order correct and made the 28” for the 572 and the 20” for the 550 but they got the order backwards.
Husqvarna H83S vs Stihl Hexa Chain
มุมมอง 3.9Kหลายเดือนก่อน
Not a true comparison just for fun. The Stihl chain you have to add one driver for it to fit the Husqvarna 572xp with the husky bar. #husqvarna572xp #husqvarna #stihl
Husqvarna 550xp mk 2 w/ 28” Cannon Super Mini bar .325 .050 106 drivers
มุมมอง 1.1Kหลายเดือนก่อน
This cannon bar with small mount for husqvarna works very good for bucking up small fire wood. It does not over work the saw and it keeps up with the oil. Anyone looking for a long bar for a 50cc saw I would suggest cannon super mini. Expensive but worth it. (Just fyi my saw is ported and is quite a bit stronger than a normal 50cc saw)
Husqvarna 572xp with 28” Cannon super mini narrow kerf bar , .325 .050 , Stihl full comp 107 drivers
มุมมอง 10K2 หลายเดือนก่อน
Husqvarna 572xp with 28” Cannon super mini narrow kerf bar , .325 .050 , Stihl full comp 107 drivers
Husqvarna 550 xp mk 2 28” cannon super mini .325 .050
มุมมอง 1.2K2 หลายเดือนก่อน
Testing the bar little bit seeing how the 550 handles it , so far it doesn’t seem to work it to hard. Better than bending over.
Husqvarna 550xp mk 2 and 572 xp cutting some firewood
มุมมอง 3.4K2 หลายเดือนก่อน
Husqvarna 550xp mk 2 and 572 xp cutting some firewood
Husqvarna 572 xp ,Testing the newest mods to cylinder checking for low end power
มุมมอง 2.2K3 หลายเดือนก่อน
Husqvarna 572 xp ,Testing the newest mods to cylinder checking for low end power
28” .325 cannon super mini on my “ported”Husqvarna 550xp mk 2
มุมมอง 5683 หลายเดือนก่อน
28” .325 cannon super mini on my “ported”Husqvarna 550xp mk 2
Badass
It actually runs the 28” bar pretty good as long as you ain’t cutting big wood. If ur Buckin small rounds all day like this , it is worth the investment imo, I don’t have to bend over or hold the 572 with a 28” or 32” bar , I notice I feel a lot better at the end of the day when using this set up
Is this ported and piped?
Is this ported or have an aftermarket muffler?
Nice Gurgle on tickover ,sounds and cuts good
My second saw on my journey into porting chainsaws , I started with 550 mk 2. These are all stock timing numbers basically I ported in a way that anyone could do it as long as you know how a 2stroke works anyone can do these mods I have done here. Oh and be good using a dremel tool 😂
@@Queetsdog Be nice to put them on a Flowbench and see results
แรงดีมากๆครับสุดยอดเลย
Unooo00 ❤TRUMP 2024EVER❤ 🗳 VOTE. 10/07/024.... ❤ 🎉⌛
.50, .63?
@@hunuhh5110 .050