วีดีโอ

galing

Ça pas l'air de fonctionner très bien... ???

Sir alin b dyan ang positive or negative

//-----Code----- int ledPin = 13; int butPin = 2; bool pressed = false; bool wasPressed = false; bool lightToggle = false; void setup() { pinMode(ledPin, OUTPUT); pinMode(butPin, INPUT); Serial.begin(9600); } void loop() { wasPressed = pressed; pressed = digitalRead(butPin); Serial.println(pressed, wasPressed); if (pressed && !wasPressed){ //Button just pressed lightToggle = !lightToggle; } digitalWrite(ledPin, lightToggle); }

Mag Kano Ang jammer mo para Hinde na gumana Ang ka kompetinsiya mo

To ako pags? drones ho gaya?

Sir pano malalaman pag malolowbatt na ang drone?

alam naman na 12.volt ang binili ginagawa pang😅😅ang sarili

Bakit hindi brushless?

I wil buy once tomorrow

Bruh no way he has the same drone as me and the same remote bruh lol

Sayang lng yung bili ko nya hindi kayang tunaw tingga.

THROW IT AWAY, THIS IS A COUNTERFIT PRODUCT

Thank you for showing this.

Hindi pala brushless yang z908?

What does it mean when there’s no blue led light and the controller is making a weird ticking noise I got mine today

Great, but I am having some issues while trying to interface with arduino unu. Can you please make a video on that. Thanks

I have a drone but how to move it up

Jadi ragu mau beli. Merk Phillips tapi kok gak bagus menurut komentar2 😁

Thank you for this tutorial! It works for me so you actually have to find the drone "wifi"

Palsu itu bang ngak ada merknya yang asli ada

boring

Bakit ang akin, nakaconnect na sa wifi drone pero di lumalabas ang cam sa phone

Thanks man you great 👍

Pora cara você filma com uma camera boa dessa , 70% da imagem e sua mão

Idol may order ko ganyan 220 order ko pero dumating 110 puyde bang palitan konalang ng heating element na 220 thanks sa sagot mo idol

Перестань использовать этот гавно

Hello bhaiya aap ye sab Saman kaha se magaye hai

Boss tanung ko lang po yun sakin60 watts tapoa yun adjustment nya natangal.. pwede paba balik yun adjusmemt nya nahila bigla naalis Salamat

Hindi pala brushless diyan sa video mo bakit inilagay nila sa picture brushless with avoidance system dapat P1,4oo langyan hindi na ako order

its not working

What if wala po nagpapakitang wifi?

I'm so happy that i already got a Drone!

Shuot idol

Gadhe patane kaun si Bhasha bolate Hain

Magkno ang charge monthly sir? Sana may app na hin naniningi para maenjoy ung pagpplipad at mairecord mo

sir di ko pa rin ma register yung phone number ko may alternative ka bang ginamit para maka register? for school ptoject kasi

Nice looking unit but you REALLY need to LEARN how to solder

dont think you put enough solder on there

Hello , Name from this I H & Link from this Induction Heather ?

May message po ako sa inyu sa email. Kindly check po. Salamat

It doesn’t work

may charger po ba yang kasama bossing ?

Fast

Ayus

Br sebln pemakaian suaranya jd keras & kasar solusinya bagaimana?

//Compatible with the Arduino IDE 1.0 //Library version:1.1 #include <Wire.h> #include <LiquidCrystal_I2C.h> LiquidCrystal_I2C lcd(0x27,16,2); // set the LCD address to 0x27 for a 16 chars and 2 line display // this constant won't change: const int Up_buttonPin = 2; // the pin that the pushbutton is attached to const int Down_buttonPin = 3; // Variables will change: int buttonPushCounter = 0; // counter for the number of button presses int up_buttonState = 0; // current state of the up button int up_lastButtonState = 0; // previous state of the up button int down_buttonState = 0; // current state of the up button int down_lastButtonState = 0; // previous state of the up button bool bPress = false; void setup() { Serial.begin(9600); pinMode( Up_buttonPin , INPUT_PULLUP); pinMode( Down_buttonPin , INPUT_PULLUP); lcd.init(); // initialize the lcd // Print a message to the LCD. lcd.backlight(); lcd.setCursor(0,0); lcd.print("Please Select:"); lcd.setCursor(2,1); lcd.print(buttonPushCounter); } void loop() { checkUp(); checkDown(); if( bPress){ bPress = false; lcd.setCursor(2,1); lcd.print(" "); lcd.setCursor(2,1); lcd.print(buttonPushCounter); } } void checkUp() { up_buttonState = digitalRead(Up_buttonPin); // compare the buttonState to its previous state if (up_buttonState != up_lastButtonState) { // if the state has changed, increment the counter if (up_buttonState == LOW) { bPress = true; // if the current state is HIGH then the button went from off to on: buttonPushCounter++; Serial.println("on"); Serial.print("number of button pushes: "); Serial.println(buttonPushCounter); } else { // if the current state is LOW then the button went from on to off: Serial.println("off"); } // Delay a little bit to avoid bouncing delay(50); } // save the current state as the last state, for next time through the loop up_lastButtonState = up_buttonState; } void checkDown() { down_buttonState = digitalRead(Down_buttonPin); // compare the buttonState to its previous state if (down_buttonState != down_lastButtonState) { // if the state has changed, increment the counter if (down_buttonState == LOW) { bPress = true; // if the current state is HIGH then the button went from off to on: buttonPushCounter--; Serial.println("on"); Serial.print("number of button pushes: "); Serial.println(buttonPushCounter); } else { // if the current state is LOW then the button went from on to off: Serial.println("off"); } // Delay a little bit to avoid bouncing delay(50); } // save the current state as the last state, for next time through the loop down_lastButtonState = down_buttonState; }

// Load Wi-Fi library #include <WiFi.h> // Network credentials Here const char* ssid = "Bototoy"; const char* password = "12345678"; // Set web server port number to 80 WiFiServer server(80); // Variable to store the HTTP request String header; //variables to store the current LED states String statePin15 = "off"; String statePin18 = "off"; //Output variable to GPIO pins const int ledPin15 = 15; const int ledPin18 = 18; // Current time unsigned long currentTime = millis(); // Previous time unsigned long previousTime = 0; // Define timeout time in milliseconds const long timeoutTime = 2000; void setup() { Serial.begin(115200); pinMode(ledPin15, OUTPUT); // set the LED pin mode digitalWrite(ledPin15, 0); // turn LED off by default pinMode(ledPin18, OUTPUT); // set the LED pin mode digitalWrite(ledPin18, 0); // turn LED off by default WiFi.softAP(ssid,password); // Print IP address and start web server Serial.println(""); Serial.println("IP address: "); Serial.println(WiFi.softAPIP()); server.begin(); } void loop() { WiFiClient client = server.available(); // Listen for incoming clients if (client) { // If a new client connects, currentTime = millis(); previousTime = currentTime; Serial.println("New Client."); // print a message out in the serial port String currentLine = ""; // make a String to hold incoming data from the client while (client.connected() && currentTime - previousTime <= timeoutTime) { // loop while the client's connected currentTime = millis(); if (client.available()) { // if there's bytes to read from the client, char c = client.read(); // read a byte, then Serial.write(c); // print it out the serial monitor header += c; if (c == ' ') { // if the byte is a newline character // if the current line is blank, you got two newline characters in a row. // that's the end of the client HTTP request, so send a response: if (currentLine.length() == 0) { // HTTP headers always start with a response code (e.g. HTTP/1.1 200 OK) // and a content-type so the client knows what's coming, then a blank line: client.println("HTTP/1.1 200 OK"); client.println("Content-type:text/html"); client.println("Connection: close"); client.println(); // turns the GPIOs on and off if (header.indexOf("GET /15/on") >= 0) { statePin15 = "on"; digitalWrite(ledPin15, HIGH); // turns the LED on } else if (header.indexOf("GET /15/off") >= 0) { statePin15 = "off"; digitalWrite(ledPin15, LOW); //turns the LED off } if (header.indexOf("GET /18/on") >= 0) { statePin18 = "on"; digitalWrite(ledPin18, HIGH); // turns the LED on } else if (header.indexOf("GET /18/off") >= 0) { statePin18 = "off"; digitalWrite(ledPin18, LOW); //turns the LED off } // Display the HTML web page client.println("<!DOCTYPE html><html>"); client.println("<head><meta name=\"viewport\" content=\"width=device-width, initial-scale=1\">"); client.println("<link rel=\"icon\" href=\"data:,\">"); // CSS to style the on/off buttons client.println("<style>html { font-family: monospace; display: inline-block; margin: 0px auto; text-align: center;}"); client.println(".button { background-color: yellowgreen; border: none; color: white; padding: 16px 40px;"); client.println("text-decoration: none; font-size: 32px; margin: 2px; cursor: pointer;}"); client.println(".button2 {background-color: gray;}</style></head>"); client.println("<body><h1>ESP32 Web Server</h1>"); client.println("<p>Control LED State</p>"); if (statePin15 == "off") { client.println("<p><a href=\"/15/on\"><button class=\"button\">ON</button></a></p>"); } else { client.println("<p><a href=\"/15/off\"><button class=\"button button2\">OFF</button></a></p>"); } if (statePin18 == "off") { client.println("<p><a href=\"/18/on\"><button class=\"button\">ON</button></a></p>"); } else { client.println("<p><a href=\"/18/off\"><button class=\"button button2\">OFF</button></a></p>"); } client.println("</body></html>"); // The HTTP response ends with another blank line client.println(); // Break out of the while loop break; } else { // if you got a newline, then clear currentLine currentLine = ""; } } else if (c != ' ') { // if you got anything else but a carriage return character, currentLine += c; // add it to the end of the currentLine } } } // Clear the header variable header = ""; // Close the connection client.stop(); Serial.println("Client disconnected."); Serial.println(""); } }

Bat dimo sinubukan ng smartphone boss?

Hi hello po!, ask for help lang po , about my RTL8720DN BW16, nahihirapan po akong mag upload ng code minsan upload successful pero hindi lumilitaw sa phone ang wifi, minsan error po, due to the libraries , board, port, etc. please help po, willing to pay if needed pi, thank you.