วีดีโอ

Go for it. mine has been holding up well so far

You’re welcome 👍🏽

Welcome

Did you you put the max at the screen also (not the max from the radio) also check in the settings. There are some volume settings that may be low. meaning there is a setting where lets say someone wants half of the max volume to be the max. The could set it to be that way so the headunit would only produce half of its real capabilities. Go into the settings and max everything to see if that helps

That’s correct 👍🏽

It was worthy. my son worked hard all summer, helped him negotiate this car for a very low price, we both worked on the car so he learned a lot. Now he is taking his DL test this week. This is going to be his first car to finish high school so im very proud of him. This one looks definitely better than the junk yard hooptie i had as my first car lol which by the way it was ugly but unbreakable. it lasted for years lol

I ordered it from eBay @mommae295

Glad to help, appreciate the support! 👍🏽

Yes engine off and pulled the sensor all the way out.

Thanks brother, appreciate the support! 👍🏽

Thank you brother! 👍🏽

👍🏽

A pressure switch in a furnace is a safety device that ensures the system is operating correctly, particularly with respect to airflow. It monitors the pressure inside the furnace’s venting system, making sure that there is proper air movement for combustion gases to be safely expelled. Here’s how it works: 1. Startup Phase: When the furnace turns on, the draft inducer fan activates to help exhaust gases out of the flue. The pressure switch monitors the pressure created by this fan. 2. Pressure Check: If the pressure is correct (indicating the draft inducer is working and air is flowing properly), the pressure switch closes, sending a signal to the control board to continue the ignition process. 3. Safety Feature: If the pressure is too low or too high (caused by blockages, leaks, or fan malfunctions), the switch will stay open, preventing the furnace from igniting. This protects against carbon monoxide buildup or other dangerous conditions. In short, the pressure switch ensures that the furnace only operates when it’s safe to do so, helping to prevent gas leaks and other hazards.

The pressure switch typically lists how much vacuum (in inches of water column, or “WC”) it needs to close. Once you confirm the inducer motor is generating the correct vacuum, you can be confident that the airflow system is working as intended. If you’ve confirmed that the inducer motor is working but the furnace is still not running, you may bypass the pressure switch temporarily to check if it’s the source of the problem. This allows the furnace to run and warm the house, but only as a short-term measure. This is considered safe to do briefly because you know the inducer motor is functioning correctly and the combustion gases are being vented properly. However, this bypass should only be used to verify that the switch is faulty. @MrCATIAEXPERT hope that helps 👍🏽

On that video the pressure switch was stuck open but checked this video i show how diagnosed everything and how to fix it th-cam.com/video/tBBv9wmopas/w-d-xo.htmlsi=4_DSZQ1MQ596MhUo

Any time!

Glad I could help brother 👍🏽🛠️💪🏽

Any time bro

👍🏽🛠️💪🏽

Glad i was able to help 👍🏽

Thank you 👍🏽

You're welcome!

You gave me a good idea. Warm water with orange peels and lime peels and do the same cycle 🔄 of recirculating the air for 5 minutes. Thank you

Hope this solve that problem 👍🏽

Remove the steering wheel fuse. A lot of time the steering controls don't work well with the headunits. If it doesn't stop the problem it is most likely cause by a short or a bad soldering of the components, and you would be better off sending that one back and getting a replacement. Hope that helps 👍🏽

Glad it helped

Some shops share this with you, some don’t trying to get a road service or a tow or by policy to avoid legal issues. Hope you make it home safe. Don’t forget to have the gps showing your speed 👍🏽

@@backontheroaddiy Didn't work anyway. Still sitting here waiting on a wrecker from the company, and questioning my life choices.

Try removing the sensor all the way

@@backontheroaddiy Had it all the way out. Didn't work. Ended up 9 hours on the side of the road waiting on the shop to send a guy with a loaner and a wrecker to tow it back. 2 hours away and it took them 5 or more. 😮‍💨

It be like that i know the feeling. But just gotta roll with the punches sometimes, tomorrow its another day. Hope everything works out well for you.

Yes they want us to buy new more often and not deal with the hand washing lol. Just make sure you use cold water, and a little bit of vinegar if you want 👍🏽

So I washed them in a gentle mode of washing machine and left them to dry. It seems they are become not so fluffy thus they will not filter small dust as good as the new one. However, it is worth testing.

Thank you for the advice 👍🏽

I would upgrade the speakers and add an amplifier that could get the full potential of those speakers.

You’re very welcome 👍🏽

a.co/d/e9bcLIQ @billyarnold1578

Yes

@@backontheroaddiy yeah mines didn't work on a 2016 freightliner cascadia automatic dt12 transmission. Thanks for the info though

a.co/d/e9bcLIQ @zdeenrdeen3278

Thanks for sharing

I will be changing the oil this week so i will do a video checking both sides 👍🏽 @donpodejko8002

I uploaded the video check it out Check your BRAKES without removing WHEELS + BONUS tip at the END of the VIDEO th-cam.com/video/_ww_I9xs4JA/w-d-xo.html

@donpodejko8002

Thanks brother

Thanks for the feedback @vovviel3049

Great tip!

Another one showing the obvious.

Did it work