Aslam Hossain
Aslam Hossain
  • 199
  • 550 044
How to Make Robo Soccer Bot using ESP32 | Smartphone Control Soccer Bot
Welcome to the 𝐀𝐬𝐥𝐚𝐦 𝐇𝐨𝐬𝐬𝐚𝐢𝐧 TH-cam channel!
𝐓𝐢𝐭𝐥𝐞: How to Make Robo Soccer Bot using ESP32 | Smartphone Control Soccer Bot | Build a new budget friendly soccer bot | Robo Soccer Bot using FlySky FS i6 Transmitter and Brsuhed ESC | Brushed ESC | Soccer Bot Making using Arduino and FlySky | Soccer Bot using 555 37GB Gear Motor | How to Make Soccer Bot using FlySky | Servo Motor as ESC | ESP32 Soccer Bot | Robo Racing Bot Making | Roborace Robot using Arduino and BTS7960 | Wireless Robot with Flysky fsi6 | Fast Line Follower Robot | Soccer Bot Competition | Best Soccer Bot | BTS7960 with FlySky | DIY Robot Soccer Bot | How to Make Battle Bot | Self Balancing Robot | Soccer Bot Chassis Making | Soccer Bot using Brushed ESC | Easiest Soccer Bot Circuit with Btsuhed ESC | Robo Soccer Bot using ESC | Arduino Soccer Bot
𝐏𝐫𝐞𝐯𝐢𝐮𝐨𝐮𝐬 𝐓𝐮𝐭𝐨𝐫𝐢𝐚𝐥𝐬 𝐨𝐧 𝐒𝐨𝐜𝐜𝐞𝐫 𝐁𝐨𝐭:
Robo Soccer Bot using Brushed ESC and FlySky Transmitter | How to Make Soccer Bot in Easiest Way: th-cam.com/video/nd-Pnnmnu04/w-d-xo.htmlsi=gGmbe2CjW1lpm47K
Robo Soccer Bot using FlySky FS-i6 Transmitter and BTS7960 Motor Driver: th-cam.com/video/gxoFwbduTOc/w-d-xo.htmlsi=8B-Z586qo14An_A3
𝐓𝐡𝐢𝐬 𝐜𝐡𝐚𝐧𝐧𝐞𝐥 𝐡𝐚𝐬 𝐬𝐨𝐦𝐞 𝐞𝐥𝐞𝐜𝐭𝐫𝐨𝐧𝐢𝐜 𝐩𝐫𝐨𝐣𝐞𝐜𝐭𝐬 𝐟𝐨𝐫 𝐛𝐞𝐠𝐢𝐧𝐧𝐞𝐫𝐬. 𝐒𝐨 𝐟𝐞𝐞𝐥 𝐟𝐫𝐞𝐞 𝐭𝐨 𝐜𝐡𝐞𝐜𝐤 𝐭𝐡𝐞𝐦:
Menu Navigation System For Line Follower Robot | Menu Navigation using OLED Display:
th-cam.com/video/sK24LOWeVZE/w-d-xo.html
Fast Line Follower Robot using 5 Channel IR Sensor and PID: Step-by-Step Tutorial:
th-cam.com/video/AVE1QM0Vac8/w-d-xo.htmlsi=pOBRCpj3fox9jRCg
Robo Race Robot using FlySky Transmitter | How to Make Robo Racing Bot without Arduino and ESC:
th-cam.com/video/XHLV4rTvCJk/w-d-xo.html
DIY 5 Channel IR Sensor Array For Line Follower Robot | Best IR Sensor For Line Follower Robot:
th-cam.com/video/7vuAqcf_HjQ/w-d-xo.html
Robo Soccer Bot Competition 2024 | Soccer Robot at Premier University Chittagong:
th-cam.com/video/YPLLPCuEBhk/w-d-xo.htmlsi=6fgFHqLB4_geoBMv
Arduino Joystick Control Bluetooth Car Using HC-05 Master and Slave:
th-cam.com/video/ENRFh83hHM8/w-d-xo.htmlsi=WkPMrsBXWxTHf_Bp
Robo Soccer Bot using FlySky FS-i6 Transmitter and BTS7960 Motor Driver:
th-cam.com/video/gxoFwbduTOc/w-d-xo.htmlsi=8B-Z586qo14An_A3
Fast Line Follower Robot / Fast LFR / Fastest LFR / PID Line Follower:
th-cam.com/video/ST8KdWPMzp4/w-d-xo.htmlsi=4OLW0cTDNwGmwwBY
How To Test Battery Capacity Using HW-586 Battery Capacity Tester:
th-cam.com/video/6RsGF6A96AE/w-d-xo.htmlsi=MkhUS5ds0tD7WHYn
Soccer Making Bot Competition:
th-cam.com/video/bpGZQB6CF8A/w-d-xo.htmlsi=hHAmXw8QBfGdrA_T
Hand Drawing PCB Layout Using Marker Pen and Etching:
th-cam.com/video/aEx78ulOg_0/w-d-xo.htmlsi=SpXpRiGOl6GOgJO6
DIY Self Balancing Robot using Arduino and MPU6050 Accelerometer:
th-cam.com/video/EjHZ4gRDKKo/w-d-xo.htmlsi=Za1fUB5piSJOBNfi
Line Follower Robot:
th-cam.com/video/0cpmNQM2RV4/w-d-xo.html
How to Make ESP32 RC Robotic Car:
th-cam.com/video/TEyqKFT7BCA/w-d-xo.htmlsi=8_QDx9524w9G8Hf6
Human Following Robot Arduino:
th-cam.com/video/Ji0UnJf86ag/w-d-xo.htmlsi=2hPtV_K97lCuBCfv
Line Sensor Array for LINE FOLLOWER ROBOT:
th-cam.com/video/ZPutfh1cwHA/w-d-xo.htmlsi=1ABa50xil3e2OKQE
ESP32 Soccer Bot / Soccer bot using ESP32 / How to Make Soccer Bot using ESP32:
th-cam.com/video/Juo_x-pgzqs/w-d-xo.htmlsi=4xVnyQETFyYteGAe
Make Professional PCB at Home:
th-cam.com/video/B6836aUVRT8/w-d-xo.htmlsi=rppKiU-8rMmlRUIQ
PCB Layout Design in Proteus:
th-cam.com/video/GIbp8wyZ9YY/w-d-xo.htmlsi=QXjpvJ8lVZiLlNSM
How To Use Sim800l GSM Module with Arduino:
th-cam.com/video/FTsBHb8g1wk/w-d-xo.htmlsi=xTjNPEJvENCJ7UHm
Music Rhythm LED Light Circuit:
th-cam.com/video/r1nODkyOey8/w-d-xo.html
Soccer Bot Competition 2023:
th-cam.com/video/E1z5GTvoCFU/w-d-xo.htmlsi=hHW5Do4kDNhnoGns
𝐂𝐨𝐦𝐩𝐨𝐧𝐞𝐧𝐭𝐬:
1) 37GB Gear Motor 500 RPM x4 (Contact to BUY at 900TK 01877543825)
2) BTS7960 Motor Driver x2
3) ESP32 x1
4) Buck Converter x1
5) Metal Chassis x1 (surl.li/tnush)
6) Wheels, L-Mount, Hex Coupler x 1set
𝐂𝐨𝐬𝐭 𝐀𝐧𝐚𝐥𝐲𝐬𝐢𝐬: (According to Bangladeshi Market)
1 ) Motor (900 TK x 4) ≈ 900 * 4 = 3600 TK ≈ $32.79
2) BTS7960 (500 TK x 2) ≈ 500 * 2 = 1000 TK ≈ $9.11
3) ESP32 ≈ 500 TK ≈ $4.55
4) Buck Converter (100 TK x 1) ≈ 100 TK ≈ $0.91
5) Chassis ≈ 1500 TK ≈ $13.66
6) Wheels, L-Mount, Hex Coupler ≈ 1500 TK ≈ $13.66
𝐂𝐢𝐫𝐜𝐮𝐢𝐭 𝐃𝐢𝐚𝐠𝐫𝐚𝐦 𝐚𝐧𝐝 𝐂𝐨𝐝𝐞: sub4unlock.io/iFp37
[𝐇𝐨𝐰 𝐭𝐨 𝐔𝐧𝐥𝐨𝐜𝐤 𝐭𝐡𝐞 𝐂𝐨𝐝𝐞: copy and paste the link in a new browser then it will ask you to subscribe to my channel and take you to my TH-cam channel page. hit the subscribe button then go to the browser again. I will be unlocked. if you already subscribed then go back to the browser without hitting the subscribe button]
#soccerrobot #soccerbot #bts7960 #esp32project #esp32 #arduino #esp32soccerbot
Like, Follow & Subscribe !!!
Instagram▶ _aslam._hossain_
Facebook Page▶ aslamhossain3852
TH-cam▶ th-cam.com/channels/daQfJEKvpoAPIzQNwFGlHw.html
If this video is helpful to you, Please Subscribe! (#Aslam_Hossain)
---------------------------------------------
👉For any inquiries: aslamhshakil20@gmail.com
---------------------------------------------
มุมมอง: 750

วีดีโอ

Automatic Car Parking System and Traffic Control | School Project Showcase | Science Project
มุมมอง 32914 วันที่ผ่านมา
Welcome to the 𝐀𝐬𝐥𝐚𝐦 𝐇𝐨𝐬𝐬𝐚𝐢𝐧 TH-cam channel! 𝐓𝐢𝐭𝐥𝐞: Automatic Car Parking System and Traffic Control | School Project Showcase In this video, we present our innovative school project focusing on an Automatic Car Parking System and Traffic Control. Watch as we demonstrate how our system efficiently manages parking spaces and regulates traffic flow using cutting-edge technology. From sensors to a...
Menu Navigation System For Line Follower Robot | Menu Navigation using OLED Display
มุมมอง 88821 วันที่ผ่านมา
Welcome to the 𝐀𝐬𝐥𝐚𝐦 𝐇𝐨𝐬𝐬𝐚𝐢𝐧 TH-cam channel! 𝐓𝐢𝐭𝐥𝐞: Menu Navigation System For Line Follower Robot | Menu Navigation using OLED Display | Fast PID Line Follower Robot using 5 Channel IR Sensor: Step by Step Tutorial | Fast Line Follower Robot using PID | Competitive Line Follower Robot | Fastest Line Follower Robot using PID | Fast Line Follower Robot using PID | PID Line Following Robot | Line...
Fast Line Follower Robot using 5 Channel IR Sensor and PID: Step-by-Step Tutorial
มุมมอง 2.8K28 วันที่ผ่านมา
Welcome to the 𝐀𝐬𝐥𝐚𝐦 𝐇𝐨𝐬𝐬𝐚𝐢𝐧 TH-cam channel! 𝐓𝐢𝐭𝐥𝐞: Fast PID Line Follower Robot using 5 Channel IR Sensor: Step by Step Tutorial | Fast Line Follower Robot using PID | Competitive Line Follower Robot | Fastest Line Follower Robot using PID | Fast Line Follower Robot using PID | PID Line Following Robot | Line Follower Robot | RC Roborace Robot using FlySky | High Speed Robo Racing Bot | Soccer...
Robo Race Robot using FlySky Transmitter | How to Make Robo Racing Bot without Arduino and ESC
มุมมอง 1.3Kหลายเดือนก่อน
Welcome to the 𝐀𝐬𝐥𝐚𝐦 𝐇𝐨𝐬𝐬𝐚𝐢𝐧 TH-cam channel! 𝐓𝐢𝐭𝐥𝐞: RC Robo Race Robot using FlySky Transmitter | How to Make Robo Racing Bot without Arduino and ESC | Robo Soccer Bot using FlySky FS i6 Transmitter and Brsuhed ESC | Brushed ESC | Soccer Bot Making using Arduino and FlySky | Soccer Bot using 555 37GB Gear Motor | How to Make Soccer Bot using FlySky | Servo Motor as ESC | ESP32 Soccer Bot | Robo...
DIY 12v Battery Pack 6Ah | High Capacity 12v Battery Pack Making
มุมมอง 553หลายเดือนก่อน
Welcome to the 𝐀𝐬𝐥𝐚𝐦 𝐇𝐨𝐬𝐬𝐚𝐢𝐧 TH-cam channel! 𝐓𝐢𝐭𝐥𝐞: DIY 12v Battery Pack 6Ah | High Capacity 12v Battery Pack Making In this tutorial, learn how to create a powerful 12V battery pack with a capacity of 6Ah for your DIY projects. We'll walk you through the process from start to finish, detailing each step and providing useful tips along the way. Whether you need a reliable power source for your ...
Line Follower Robot Competition 2024 | Fast LFR Competition in Bangladesh
มุมมอง 771หลายเดือนก่อน
Line Follower Robot Competition 2024 | Fast LFR Competition in Bangladesh
DIY 5 Channel IR Sensor Array For Line Follower Robot | Best IR Sensor For Line Follower Robot
มุมมอง 1.7Kหลายเดือนก่อน
DIY 5 Channel IR Sensor Array For Line Follower Robot | Best IR Sensor For Line Follower Robot
Line Follower Robot Race Competition 2024 | Fast LFR Competition in Bangladesh
มุมมอง 901หลายเดือนก่อน
Line Follower Robot Race Competition 2024 | Fast LFR Competition in Bangladesh
Robo Soccer Bot using Brushed ESC and FlySky Transmitter | How to Make Soccer Bot in Easiest Way
มุมมอง 1.9K2 หลายเดือนก่อน
Robo Soccer Bot using Brushed ESC and FlySky Transmitter | How to Make Soccer Bot in Easiest Way
Robo Soccer Bot Competition 2024 | Soccer Robot at Premier University Chittagong
มุมมอง 7352 หลายเดือนก่อน
Robo Soccer Bot Competition 2024 | Soccer Robot at Premier University Chittagong
Arduino Joystick Control Bluetooth Car Using HC-05 Master and Slave
มุมมอง 5K3 หลายเดือนก่อน
Arduino Joystick Control Bluetooth Car Using HC-05 Master and Slave
Robo Soccer Bot using FlySky FS-i6 Transmitter and BTS7960 Motor Driver
มุมมอง 9K3 หลายเดือนก่อน
Robo Soccer Bot using FlySky FS-i6 Transmitter and BTS7960 Motor Driver
Fast Line Follower Robot using PID: Step by Step Tutorial
มุมมอง 29K4 หลายเดือนก่อน
Fast Line Follower Robot using PID: Step by Step Tutorial
How To Test Battery Capacity Using HW-586 Battery Capacity Tester
มุมมอง 2704 หลายเดือนก่อน
How To Test Battery Capacity Using HW-586 Battery Capacity Tester
Hand Drawing PCB Layout Using Marker Pen and Etching
มุมมอง 6704 หลายเดือนก่อน
Hand Drawing PCB Layout Using Marker Pen and Etching
DIY Self Balancing Robot using Arduino and MPU6050 Accelerometer
มุมมอง 8K4 หลายเดือนก่อน
DIY Self Balancing Robot using Arduino and MPU6050 Accelerometer
6 Channel Line Sensor Array for LINE FOLLOWER ROBOT | Best IR Sensor For Line Follower Robot
มุมมอง 3.7K4 หลายเดือนก่อน
6 Channel Line Sensor Array for LINE FOLLOWER ROBOT | Best IR Sensor For Line Follower Robot
Soccer Bot Match | Robot Soccer Competition | IIUC Soccer Bot
มุมมอง 3745 หลายเดือนก่อน
Soccer Bot Match | Robot Soccer Competition | IIUC Soccer Bot
How to Make Soccer Bot using ESP32 | Soccer Bot Components | Mobile App Controlled Soccer Bot
มุมมอง 1.3K5 หลายเดือนก่อน
How to Make Soccer Bot using ESP32 | Soccer Bot Components | Mobile App Controlled Soccer Bot
How To Use Sim800l GSM Module with Arduino | SIM800l GSM Module Network Problem
มุมมอง 6485 หลายเดือนก่อน
How To Use Sim800l GSM Module with Arduino | SIM800l GSM Module Network Problem
Human Follower Smart Robot Car using ATmega328P
มุมมอง 3536 หลายเดือนก่อน
Human Follower Smart Robot Car using ATmega328P
How to Make Professional Printed Circuit Board (PCB) at Home
มุมมอง 1.5K6 หลายเดือนก่อน
How to Make Professional Printed Circuit Board (PCB) at Home
Human Following Robot using Arduino: Step-by-Step Tutorial
มุมมอง 2.3K6 หลายเดือนก่อน
Human Following Robot using Arduino: Step-by-Step Tutorial
How to Make ESP32 RC Robotic Car: Step by Step Tutorial
มุมมอง 18K6 หลายเดือนก่อน
How to Make ESP32 RC Robotic Car: Step by Step Tutorial
Line Follower Robot using Arduino and IR Sensor: Step-by-Step Tutorial
มุมมอง 1.1K7 หลายเดือนก่อน
Line Follower Robot using Arduino and IR Sensor: Step-by-Step Tutorial
Soccer Bot Competition 2023 in IIUC Tech Fest | Robot Soccer Game 2023
มุมมอง 6337 หลายเดือนก่อน
Soccer Bot Competition 2023 in IIUC Tech Fest | Robot Soccer Game 2023
High Capacity DIY 12 Volt Battery Pack using Lithium-ion Cell
มุมมอง 1.3K7 หลายเดือนก่อน
High Capacity DIY 12 Volt Battery Pack using Lithium-ion Cell
Grand Final Match | Soccer Bot Competition 2023 | IIUC Tech Fest
มุมมอง 6K7 หลายเดือนก่อน
Grand Final Match | Soccer Bot Competition 2023 | IIUC Tech Fest
IR Sensor and Obstacle Detector Circuit: Breadboard Project
มุมมอง 3.1K8 หลายเดือนก่อน
IR Sensor and Obstacle Detector Circuit: Breadboard Project

ความคิดเห็น

  • @FatmaTarek-cj8vi
    @FatmaTarek-cj8vi 8 ชั่วโมงที่ผ่านมา

    i have a project in the line following robot and i check all the connections but it still does not work.....do we press the push button after we open the switch?

  • @mtz-co3ec
    @mtz-co3ec 9 ชั่วโมงที่ผ่านมา

    Hi what is the minimum gap between the sensors can i just fit them to gather with no gap at all ??

    • @aslamhossain1
      @aslamhossain1 7 ชั่วโมงที่ผ่านมา

      2cm

  • @user-wo6qn3vf9n
    @user-wo6qn3vf9n 23 ชั่วโมงที่ผ่านมา

    I get the same effect by flicking the light switch on and off.

  • @ragibhasan8099
    @ragibhasan8099 วันที่ผ่านมา

    Bro can I upload another code for my BLE control car. Only change pinout

    • @aslamhossain1
      @aslamhossain1 21 ชั่วโมงที่ผ่านมา

      Yes

  • @jumbo999614
    @jumbo999614 2 วันที่ผ่านมา

    Just regular ink pen?

    • @aslamhossain1
      @aslamhossain1 วันที่ผ่านมา

      No. Permanent Marker

  • @fishsticks6611
    @fishsticks6611 2 วันที่ผ่านมา

    The l298n motor driver beeps

    • @aslamhossain1
      @aslamhossain1 2 วันที่ผ่านมา

      Increase the pwm value for speed.

  • @Unkn0wn_Reel
    @Unkn0wn_Reel 2 วันที่ผ่านมา

    Which one of 3V 6V or 12V N20 gear motor i should use??

    • @aslamhossain1
      @aslamhossain1 2 วันที่ผ่านมา

      12v

    • @Unkn0wn_Reel
      @Unkn0wn_Reel 2 วันที่ผ่านมา

      ​@@aslamhossain1I'm using L298N motor driver. Is it okay to use 12V motor

    • @Unkn0wn_Reel
      @Unkn0wn_Reel 2 วันที่ผ่านมา

      Also if i didn't found 12V by any chance. Can i use 6V

  • @cesarpascalvasquez7499
    @cesarpascalvasquez7499 3 วันที่ผ่านมา

    Code?

  • @gamexpro2.040
    @gamexpro2.040 3 วันที่ผ่านมา

    When I connect with computer it's correctly pairing with mobile and getting signal in serial monitor But when i give power source then blutooth not pairing

    • @aslamhossain1
      @aslamhossain1 2 วันที่ผ่านมา

      esp32 isn't getting enough power. Use buck converter and set voltage at 4.5v to power up the esp32

    • @gamexpro2.040
      @gamexpro2.040 2 วันที่ผ่านมา

      Can I give supply through esp 32 by charging cable???

  • @Thunder__Altaf
    @Thunder__Altaf 3 วันที่ผ่านมา

    I made all connections according to circuit diagram but, it's not working ,what might be the problem?

    • @aslamhossain1
      @aslamhossain1 2 วันที่ผ่านมา

      Make sure enable pins of driver short with vcc

  • @SrujanV
    @SrujanV 3 วันที่ผ่านมา

    Bro then how to connect 8 sensor line follower connections to this circuit

    • @aslamhossain1
      @aslamhossain1 2 วันที่ผ่านมา

      Connect sensor pin A0 to A7

  • @ShahFahadAhmed
    @ShahFahadAhmed 3 วันที่ผ่านมา

    you could replace l298n that takes alot of space and weight, and use l293d ic or DRV8833 driver

  • @islammabrouk848
    @islammabrouk848 3 วันที่ผ่านมา

    I need the code please

  • @cesarpascalvasquez7499
    @cesarpascalvasquez7499 3 วันที่ผ่านมา

    Do you have a code to use a qtr sensor and don't need buttons?

  • @benitocamelo8944
    @benitocamelo8944 4 วันที่ผ่านมา

    why in the video is a esp 32 of 30 pins and in the diagram is a esp32 of 38 pin? it work with the one of 30?

  • @himanshusingh4688
    @himanshusingh4688 4 วันที่ผ่านมา

    can you please make a video on how to tune the kp and kd of lfr pid bot if it occurs different type of problems

  • @aslamhossain1
    @aslamhossain1 4 วันที่ผ่านมา

    𝐏𝐫𝐞𝐯𝐢𝐮𝐨𝐮𝐬 𝐓𝐮𝐭𝐨𝐫𝐢𝐚𝐥𝐬 𝐨𝐧 𝐒𝐨𝐜𝐜𝐞𝐫 𝐁𝐨𝐭: Robo Soccer Bot using Brushed ESC and FlySky Transmitter | How to Make Soccer Bot in Easiest Way: th-cam.com/video/nd-Pnnmnu04/w-d-xo.htmlsi=gGmbe2CjW1lpm47K Robo Soccer Bot using FlySky FS-i6 Transmitter and BTS7960 Motor Driver: th-cam.com/video/gxoFwbduTOc/w-d-xo.htmlsi=8B-Z586qo14An_A3

  • @himanshusingh4688
    @himanshusingh4688 4 วันที่ผ่านมา

    sir what to do if my 5 array ir sensors give max value on white and min value on black

    • @aslamhossain1
      @aslamhossain1 4 วันที่ผ่านมา

      a little bit of change in digital conversion part: if (s[i] > threshold) s[i] = 0; else s[i] = 1;

    • @himanshusingh4688
      @himanshusingh4688 4 วันที่ผ่านมา

      @@aslamhossain1 sir but i have done if(s(i)<threshold) s(i)=1 else s(i)=0 is this wrong ? my bot goes forward and always try to move to left and if i take it up and put down it goes in reverse direction

  • @HardeepSingh-zt4cd
    @HardeepSingh-zt4cd 5 วันที่ผ่านมา

    Kindly make same video using arduino uno board

  • @fatmatarek854
    @fatmatarek854 5 วันที่ผ่านมา

    I connected the circuit and it lights on when I connect the arduino with the laptop put when I remove it and turn on the switch it does not light on or move

    • @aslamhossain1
      @aslamhossain1 5 วันที่ผ่านมา

      Check all the connection. The problem is here

  • @Sadekul991
    @Sadekul991 5 วันที่ผ่านมา

    Nahid broosss bot🤨

  • @rlrentertainmentsinventions
    @rlrentertainmentsinventions 5 วันที่ผ่านมา

    How many esc you have used

    • @aslamhossain1
      @aslamhossain1 5 วันที่ผ่านมา

      Details video: th-cam.com/video/XHLV4rTvCJk/w-d-xo.htmlsi=lRkaCqr9B9I3noPD

    • @rlrentertainmentsinventions
      @rlrentertainmentsinventions 5 วันที่ผ่านมา

      @@aslamhossain1 seen it and subscribed

  • @ahbabmurshed2062
    @ahbabmurshed2062 5 วันที่ผ่านมา

    From where did you buy those metal wheels?

    • @aslamhossain1
      @aslamhossain1 5 วันที่ผ่านมา

      www.daraz.com.bd/products/65mm-metal-wheel-rim-high-grip-rubber-tires-tyres-for-wltoys-144001-a959-a959-b-124019-124018-rc-car-partsred-i169884740.html

    • @ahbabmurshed2062
      @ahbabmurshed2062 5 วันที่ผ่านมา

      @@aslamhossain1 thanks a lot.

  • @noorjannat7018
    @noorjannat7018 5 วันที่ผ่านมา

    All connections are correct but wheels are not moving and remote also shows Err-4%. What can I do?

    • @aslamhossain1
      @aslamhossain1 5 วันที่ผ่านมา

      Maybe the circuit is damaged

  • @user-rs9xo9zh4q
    @user-rs9xo9zh4q 5 วันที่ผ่านมา

    Hey bro, can you share the code?

    • @aslamhossain1
      @aslamhossain1 5 วันที่ผ่านมา

      In the description

  • @noorjannat7018
    @noorjannat7018 6 วันที่ผ่านมา

    I have put an output volt of 5.01 in my XL4015 Buck Module. All setups were done. Then I connected the whole circuit to Lipo battery of 2200mah to check the movement. But nothing moved , also the VCC connected wire melted. Can u please say where is the problem? Is it the Output volt or wire?

    • @aslamhossain1
      @aslamhossain1 6 วันที่ผ่านมา

      Use thicker wire. 14-16 AWG

    • @noorjannat7018
      @noorjannat7018 5 วันที่ผ่านมา

      Thanks a lot, but now the problem is the two left wheels became auto. It Doesn't stop or move unless we disconnect the battery.

  • @noorjannat7018
    @noorjannat7018 6 วันที่ผ่านมา

    Can i use XL4015 as buck converter replacing LM2596? And if i do that, what and where will be the connections?

    • @aslamhossain1
      @aslamhossain1 6 วันที่ผ่านมา

      yes, you can use it. connect the battery terminal with the buck converter's input. set the output at 5v by adjusting potentiometer. then the output will go to BTS motor driver and Receiver.

  • @noorjannat7018
    @noorjannat7018 6 วันที่ผ่านมา

    After connecting the battery with buck converter LM2596 the blue light does not light up and also there is no voltage reading. What to do?

    • @aslamhossain1
      @aslamhossain1 6 วันที่ผ่านมา

      check the polarity.

  • @er.himanshu99
    @er.himanshu99 6 วันที่ผ่านมา

    Bro rotatory encoder is not required? So how are you using PID

    • @aslamhossain1
      @aslamhossain1 6 วันที่ผ่านมา

      Used push button.

    • @er.himanshu99
      @er.himanshu99 6 วันที่ผ่านมา

      @@aslamhossain1 my sensor analog readings are opposite max for white and min for black

  • @lgamer2324
    @lgamer2324 8 วันที่ผ่านมา

    Online app link

    • @aslamhossain1
      @aslamhossain1 8 วันที่ผ่านมา

      www.amazon.in/Electronic-Spices-Control-Transmitter-Receiver/dp/B0BMF8C9T7

  • @aaryanyadav3567
    @aaryanyadav3567 8 วันที่ผ่านมา

    Can i use 2200 mah 3s lipo battery

  • @arjiesudaria6407
    @arjiesudaria6407 9 วันที่ผ่านมา

    Hello aslam, can i have the code and schematic?

    • @aslamhossain1
      @aslamhossain1 9 วันที่ผ่านมา

      th-cam.com/video/ST8KdWPMzp4/w-d-xo.htmlsi=4AJ8rax8NIbbinRZ

    • @arjiesudaria6407
      @arjiesudaria6407 8 วันที่ผ่านมา

      @@aslamhossain1 if i use 25ga what motor driver can i use? It says 25ga has a 2.1amps

    • @aslamhossain1
      @aslamhossain1 8 วันที่ผ่านมา

      @@arjiesudaria6407 l298n

    • @arjiesudaria6407
      @arjiesudaria6407 8 วันที่ผ่านมา

      @@aslamhossain1 can it support with this specification 12V 1:20 500RPM ≤190MA 460RPM ≤145MA 150gf.cm ≤2.1A 7.5kgf.cm

    • @aslamhossain1
      @aslamhossain1 8 วันที่ผ่านมา

      @@arjiesudaria6407 yes

  • @mazibarrahman8097
    @mazibarrahman8097 11 วันที่ผ่านมา

    If I use lipo battery, what will be the ampere and volt for this robot?

    • @aslamhossain1
      @aslamhossain1 10 วันที่ผ่านมา

      3s 3000/4000mAh

  • @bahadirgulcu272
    @bahadirgulcu272 11 วันที่ผ่านมา

    Good works

  • @bahadirgulcu272
    @bahadirgulcu272 11 วันที่ผ่านมา

    Super

  • @Hassan_STUDY
    @Hassan_STUDY 11 วันที่ผ่านมา

    Can you please share where we can find it?

    • @aslamhossain1
      @aslamhossain1 10 วันที่ผ่านมา

      tr.aliexpress.com/item/33022320164.html?spm=a2g0n.productlist.0.0.729ffcf9nngTsn&browser_id=ca9042ceadfb4fa1879abbc86810f898&aff_trace_key=f38c88aea65d4924ab8a7d581c441043-1707461356675-05219-UneMJZVf&aff_platform=msite&m_page_id=szsgncgghecawdxb18f43c42bd8360e32a2463137f&gclid=&pdp_npi=4%40dis%21BDT%21196.26%21108.55%21%21%211.79%210.99%21%402103266e17148288805051618ec09c%2167220518199%21sea%21BD%210%21AB&algo_pvid=726e27bd-3d8f-4f69-9f82-820d79ac3259

  • @mosaddikahoque8624
    @mosaddikahoque8624 11 วันที่ผ่านมา

    I tried with 5 array IR but the button & motor are not working properly. Would you please tell me the reason?

    • @aslamhossain1
      @aslamhossain1 11 วันที่ผ่านมา

      Please follow this video for 5 array: th-cam.com/video/AVE1QM0Vac8/w-d-xo.htmlsi=pysijxYS8412Gbvi

  • @noorjannat7018
    @noorjannat7018 11 วันที่ผ่านมา

    Which battery did you use?

    • @aslamhossain1
      @aslamhossain1 11 วันที่ผ่านมา

      Lithium-ion. Please Use LiPo Battery, which is suitable for soccer bot.

  • @MarlonVillaruel
    @MarlonVillaruel 12 วันที่ผ่านมา

    What is the purpose of pushbutton? Can I not put the pushbutton and direct it to the resistor and LED?

    • @aslamhossain1
      @aslamhossain1 12 วันที่ผ่านมา

      Push button to activate the line following code. You can ignore it.

    • @FatmaTarek-cj8vi
      @FatmaTarek-cj8vi 8 ชั่วโมงที่ผ่านมา

      @@aslamhossain1 so i should delete the line of the push button?

  • @donzet4404
    @donzet4404 12 วันที่ผ่านมา

    How many rpm for the motor?

    • @aslamhossain1
      @aslamhossain1 12 วันที่ผ่านมา

      600

    • @fisimat
      @fisimat 12 วันที่ผ่านมา

      Is the same of tutorial in your Chanel?

  • @ninetalesgamer6859
    @ninetalesgamer6859 12 วันที่ผ่านมา

    Sir I am unable to unlock the code can anyone plz give me the code for this

    • @aslamhossain1
      @aslamhossain1 12 วันที่ผ่านมา

      Send a mail: aslamhshakil20@gmail.com

  • @Madhan1110
    @Madhan1110 13 วันที่ผ่านมา

    What to do if I have a maker-line IR array by cytron which gives digital readings, can we connect those to the arduino the same way

    • @aslamhossain1
      @aslamhossain1 13 วันที่ผ่านมา

      Yes. But need to change in code.

    • @Madhan1110
      @Madhan1110 10 วันที่ผ่านมา

      Thank you so much for replying....❤️

  • @tiktokerist6989
    @tiktokerist6989 14 วันที่ผ่านมา

    i love your works im from the Philippines and we are teaching robotics too can I use this as materials for teaching?

  • @arjiesudaria6407
    @arjiesudaria6407 15 วันที่ผ่านมา

    hello aslam, can you suggest motor that it's goods for line follower and sumobot the weight requirements is 1.5kg and 20x20cm

    • @aslamhossain1
      @aslamhossain1 15 วันที่ผ่านมา

      25ga gear motor

    • @arjiesudaria6407
      @arjiesudaria6407 15 วันที่ผ่านมา

      @@aslamhossain1 what speed?

  • @user-ni3es7xv1m
    @user-ni3es7xv1m 16 วันที่ผ่านมา

    Why this is a short video. You should give detail explanation with circuit.

  • @juansiahaan9737
    @juansiahaan9737 16 วันที่ผ่านมา

    Sorry, I'd like to ask why the 220 Ohm resistor is connected to the GND pin of the combined GND of LM2596, XL6009, 4 push buttons, and 2 LEDs? What is the purpose of this?

    • @aslamhossain1
      @aslamhossain1 13 วันที่ผ่านมา

      Ground for all the devices is common.