วีดีโอ

Hell ya!!

I’m new to trying to film all this shit. Next time. Thanks for the tip.

Looks just like it did from before. I can’t post a pic in a comment but I have the results on my IG @rmb.built

Thanks for watching!

Not really, you’re going to have to get behind the headlight from the engine bay or remove the headlight. Thanks for commenting. Let me know how it goes. However, if you want to tap into the fog lights on the bumper and then wire that to an up fitter switch. You would do that behind the bumper and that’s fairly easy to do.

@@RMBBuilt Thanks for the quick reply AND the additional information.! Great video - subscribed today

@ I’m here to help. New videos on the Limited/Platinum/King Ranch tailgate appliqué and rear Ford badge removal coming soon.

I do actually, with the correct rivets, and if you’re ok with it staying with the truck if you ever sell it. The plastic on the tray isn’t super thick so just make sure your rivet is good with the thickness of the mount plus maybe an 1/8”. Let me know how it goes.

Yes, pretty easy to do. just slightly loosen mounting bolts until you can nudge and adjust to where you want it, then re-tighten. Good to go. Let me know if you need anything else.

Correct, they used to give an option of color while you built your chair wi the color choices, free of charge.

Thanks. Ya it’s crazy you don’t have a paint option for the satin chrome or black at least. On the 2025 models, you can choose black trim on a Platinum but not on a Platinum Plus. Crazy.

Yes, so it is a soft emblem, you could remove it, paint, then replace or buy a new piece, and stick on. Or, if you were able to get the emblem off and not damage the adhesive on the back so it’s not visible on the front, you could reuse that. Check oemfordparts.com for just the soft decal. Let me know how it goes.

Thanks Chris, Will do! Keep that Azure Gray, it’s a color that’s so exclusive it was only available for 2023. Highly sought after.

What are you thinkin for your grille?

He’ll ya Devin, anytime!! Also remember to pinch off the washer fluid line or you’ll drain it if you drive it while the grille is off.

Contact me and we’ll make your ride however you want it.

Always happy to help.

I like both for different reasons. Both cushions you can sit in for hours no problem. The took tray I use all the time and noticed when sitting in the Max I wish it had the tray. I jumped on the sport first just to try Vyper out and spend less. The larger wheels on the Max are awesome on concrete cracks, chips, and hoses/cords. The thicker cushion on the Max is really nice. I would suggest snagging the sport first IMO.

The clips around the headlights are where they seem the weakest, almost every truck seems to break one when removing, I plastic weld them back on and it’s always worked out fine. Also, it helps to go back and forth working a little on each side. Thanks for watching.

@@RMBBuilt thanks for the tip

@ anytime.

Appreciate it 👊🏼

I do. Do you want the whole grill?

@@RMBBuilt yes please, thanks

@@J.Krug00 here PC3Z-8200-EA

@@J.Krug00 let me know if you need any other info.

@@RMBBuilt i appreciate it, thank you

My pleasure.

I can spend hours in these chairs and not even know it. Thanks for making high quality chairs. Hoping to be able to grab a cart one day, and please keep the limited drops comin! The red vein was 👌🏼

I hope I helped.

Absolutely. If you or he has any more questions please don’t hesitate to ask.

Appreciate cha Dr. Trigger 🎩

Let me check

I thought so too!

Yes, I did on this one, however my 2022 F350 I did forget to plug that speaker back in and noticed the audio sounded a bit different and thought that must’ve been it and it was. I use the @bulletpointmountingsolutions on all my trucks. Great advice for a first timer tho.

The rear bumper is very easy to remove disassemble then reassemble and install back onto the vehicle. And my truck was a lariat ultimate which has a lot more of the sensors and electronics going on with the rear bumper so if your rental truck was an XL trim, there would be no sensors and hardly any electrical. Hopefully this helps you out.

I always use JB Weld Plastic Bonder. It’s their high strength structural adhesive and dries in 15 minutes. Works awesome. Thanks for watching.

Hi. I always use JB Weld Plastic Bonder. Dries in 15 mins and works and holds great. Hope this helps.

Let’s do it!

Will do!

I didn’t know either until I got inside of it.

I will get better the more videos I make. Gotta work out the kinks.

You bet!

I love that show

Glad you think so!

Ya they are

Glad it was helpful!

They end up really nice

Always…

Thanks!

I will no doubt.

You're welcome

Appreciate it.

Glad you think so!

I love them

They’re the best.

Yes it is.

Glad it was helpful!