วีดีโอ

I like berserk too

Counterfeits, clones and copies are different things. No issues with clones and copies (less accurate copies than clones) but I want to call in an airstrike on factories and distributors that sell branded counterfeits.

I’m probably going to get a 940 clone. If I can figure out who’s got a good one (never bought anything from any of the direct from China online stores that are all over the internet ,so dk where to order from.w a knife or anything else. Couldn’t care less if it’s got a butterfly logo or not.just want to get the best knockoff and spend some time with it before possibly getting another expensive knife.from what I’ve seen after looking into it a little deeper, the Chinese stuff isn’t all bad stuff. Some even switch up the design a little bit and make a knife that is better in some ways,but keep the blade,balance,demotions & important parts about identical .. a good enough knife to actually use & enough like the one I think I want to help make that call. )I just very recently got a hankering for a axis lock or bar lock ect type of knife. 3 weeks ago or something. Never had one,never really noticed them . But since I have,the 940 keeps popping up as a favorite. So ,went to a local gun store that appears to be a authorized dealer. I didn’t ask,but they have a big nice looking BM glass display cases with the TM all over the place,back lit & all. The thing is, it is locked,there is a sales person kinda hanging over your shoulder when you’re trying to check out the knives. I get that. Some people don’t know how to handle knives and might drop them or mess them up in some way,put them back with finger prints or looking messy or something like that. Or maybe even try to steal one. With cameras everywhere ,especially in a gun store & a bunch of people with loaded guns on them,that would be about the last place I would expect a thief to try something like that..But who knows. People.?.?. I had stumbled on a clone video before looking at some of the knives in that BM case.1 single video & from what I saw they were selling some real ones and some fakes at around 1/2 price. I suppose they expect the customer to know what is too good to be true and what is not.& people should do their own research. I do. .I knew enough to spot a few real ones and some clones. There was customers who were waiting to check out ,so I told the guy thx and let him lock up. They also had a few display knives that were on a cable. They were not good examples & loose and all.+ cable was in the way of trying out the action. Any way. That’s what’s up. Usually prefer a drop point blade but the reason ppl like the 940 & the reason the guy made the 1st one has made me think i could use one. & there’s the current economy & inflation. I honestly need to go budget at the moment ..That’s the bottom line. Thx for the video though. . I like otfs too. have 1.a old ultratech with some cool features. .showed it to my boss years ago,he bought a infidel a cpl months later. I know that reverb feeling you were talking about. Felt a little cheap compared to my MT. Over & out. Like & subscribed

I don’t understand what you mean by “the blade has to be in neutral”???- Edit: NEVERMIND! I think I figured it out; or else it re-seated itself after the first trigger “fail” but it’s been cleaned, rust removed, oiled and put back together! Finally works right!! Thank you for this video-otherwise I wouldn’t have gotten this thing working right 😅 Only suggestions: make sure ALL your movements/what you’re doing to the knife can be seen or explain what/why you’re doing EVERYTHING. For instance, once you showed us how the knife worked without its cover, and you told us it had to be “in neutral” (what does that mean?) you then started fiddling with one of the tiny spring-locks just off camera, like you were trying to get it to engage or dis-engage but because it was off camera and you didn’t say WHY you did that…just a couple of confusing spots here or there. I actually lost (and found) one of those tiny little springs FOUR times 😮‍💨 but thankfully found it each time, and it’s SECURELY back in there now! Great video. Before I found this I didn’t even KNOW this thing was called an “OTF” knife. Learned a lot. Thanks 👍

Lol! Thanks man

OK you got my attention. But about $350? I guess I'll take 2.

Waiting for the "Why would you bring a knife to church oh my goddddd" comments

You are the best reviewer on clones. You always give an honest fair review. Would love to see you bring back more of the clone videos like you had in the past.

How old are you?

But your wife has some visual overweight…

It's abalone or mother of pearl. This man wound real at all

I love the Chinese this hate has to stop

If the small springs dont work or are damaged, you can take a really small section of a pen spring and put it in, for some reason my springs were both ruined after 1 day of use, but pen springs are alot sturdier, but its difficult to get the right tension for the knife to lock in place correctly.

ya f,$#@ the hater gader ader sum bitchs, and 1/2 the country if not more are not Americans. pimp

Real Talk, You earned My Subscription. Keep Up The Good Work ,Bro!

you didn't need to disengage at all, these knives are never under tension until your thumb is pushing the switch

Question, I just ordered one of those autofakes. Can’t seem to find any disassembly videos on it. Have you ever taken one apart? If so, any speed bumps to watch for? You should do a video on it, as you just might be the first!

Sub👍🏻

I’m kind of a clone guy simply because I always change edge profiles, (I usually treat EDC knives as “martial” blades as opposed to hard use tools) so my pocket knives always have serious “scalpel edge”. (I’ve even gone to a zero grind every now and again, just because I really love zero grind) I would hesitate to go after a high dollar blade with a belt grinder, even though I’m sure that I’ll end up pulling the trigger on a Microtech eventually, if for no other reason to see what 10-12 times the price actually gets me.😅 ( I have noticed the couple fakes I have don’t hold an edge for beans though) SIDE NOTE; As I make knives, (fixed blade only) I’m thinking of taking this new Ultrafake I just got and making a good blade for it, just to see if I can.😊

I don’t know about anyone else, I seem to always reprofile the edge on every knife I own. (I’m the guy who sharpens xacto blades, as they aren’t sharp, and just might be why I don’t own a real microtech )

what I don't get is how expensive the real thing is compared to a counterfeit or clone that's nearly identical. sure, the level of quality and materials might not be the same but the way it functions pretty much is. I bought an ultratech clone (not a counterfeit) from amazon for $60, took it apart to look at the insides and compared it to videos of someone taking apart the real thing and they're like 99% identical. the finish is not the same, but the shape of the internal parts and exterior are pretty much spot on. of course not all clones or counterfeits are made equally, I got an infidel counterfeit that had different internals and was crap, but in the case of my ultratech clone it was pretty much a well made super cheap version of the real deal. the fact that there are well made knock offs out there makes me think that paying $300 or more for the real thing is kind of a scam. it's like you're paying more for the name brand than the actual functionality.

So i put everything back the way u did ( i thought) but it still doesnt fire..what am i doing wrong? Can i send u pics or even better a short vid?

The bags that come with the Benchmade the pull string bags on the Clones 6:54

I bet both cut open Amazon boxes and your mail. I have clones and real brands and I could care less. I'm not a steel snob

There’s always a bunch of clowning about those ever present pouches, But I find they make great pistol magazine pouches, light, multi tool, ect.

This is March, 2024 and I just ordered 5 knives from Wish. Haven’t gotten the order yet, I’m waiting but everything about them seems great. We’ll see how they look when I get them.

I have yet to buy a high dollar OTF, but in my book the DA OTF is just about the most handy pocket knife to have and carry, and I’ll tell you why. The ability to get it out your pocket, opened, used, closed and back in your pocket one handed, SAFELY (without gymnastics) is awesome. (Just picture yourself on top of a ladder with one hand free) So far, I like the clones as I don’t feel bad beating them up, but it IS tiresome having to constantly sharpen them up, so I just might get out there and try an Ultratech just for the steel.

Where is the Love Live Laugh canvas?

That appears to be a very well-made knife!

Hey buddy thanks for that I really appreciate it cuz I had a couple of them and they were apart and I had no idea how to put them back together that video helped me a lot and the springs are hell wouldn't back in that one smaller one but thanks I got it in there I wanted to ask you, I have another blade that I can't well I want to take it apart and put it back together but I don't even know how to take it apart it's one of those old Italian stiletto switchblades you know with the push button and it opens up can you do a video on that if you can beat regards jimmy

Can you tell me the dimensions of the spring in the knife? Thanks PS Great vids - just found you and I'm a new subscriber.

Love your content bro. Keep up the good work🎉

Demarcus chopper leather sheet for protection

Iv got a few fixed blade clones. They are defnitly getting better eith there clones. Compared to 5 years ago.

Can we get some updates

❤️

👍

I own a phaeton a shoot out (og) and a troodon. My kershaw livewire (20cv) and vipertec hendrix are both far better than the rest. Just my contribution

I thank you for these videos bro, you keep it 💯

It has nothing to do with the price making it a good knife. It's about using a knife that is Benchmades intellectual property and is a USA product, so if you use that fake, you are saying in a way screw you to the manufacturers of our country. I'm not even going to mention the mechanical make up of that fake is all garbage, especially the blade steel which is some type of 440. Buy once, cry once.

Lol "one of the little chinese kids" lol "sell it as a blem." USA!

Please do more videos that made your channel famous. The knife clone videos. Thanks

thanks sr yiu saved my new one , just arrived , pull apart and have no idea where the small springs come from lol 😅 now works like new 👌 thanks to you

Can anyone tell me what American made otf that Chinese knife copies ? I know it says Benchmade on it but I couldn't find it. Great vid by the way, Coud come in handy 🙂

sharpening one side only of daggers make them sharper. It's a matter of geometry; you can sharp at a lower angle by sharpening one side only.

Looks like I’m buying the clone 🤣🤣🤣🤣. Great video tho

Omg thank u so much I didn't know how to fix my I took it apart and didn't know how to put it back together 😂

Good stuff!!! Love the 940's!

Took mine apart thinking it was easy to put back 😂 thanks to this video I got it going

Awesome video Levi!!! The dummy red button/dial is used to adjust the blade length if it was a real lightsaber.