วีดีโอ

April 2023 - are there any known issues with the first Integras?

Thank you so much 🙏🏼✌🏼

Thank you! Totally agree with you! Confidence of the V2 is unbeatable 💪🏼

Yes, I have heard about the problems with the Goggles 3. In my case it was a hardware failure. I never had a problem with my Goggles V2 for years...

@@flipsfpv I just sold my v2 and I'm looking for goggles for myself, I'll probably buy dji integra goggles. I think V2 are the best goggles I ever had.

Hi, yes you can power up the GPS module by an external power supply with 5V. Be careful with the polarity! Why do you want to power up the GPS module by powerbank or phone? For testing?

@@flipsfpvmy o3 air unit is always get very hot before the GPS locks to enought sats , most of the times it locks zero , some times it works but most of the times it does not , i tried to move it on all ports ( on betaflight )but it seems like gps only works when i plug in the battery , but then all the electric noise makes GPS ‘s work very hard to lock sats .. so thats it :/:(

It is a nazgul ECO HD with a m10 GPS and a blitz atf435 fc ( bnf quad)

Okay, I understand... that is annoying, if the GPS lock takes so much time or doesn't work... Which gps module do you use? Some people have had good experiences with shielding the cables from the GPS module to reduce the electric noise.

@@flipsfpvits a iflight m10

Thank you! For this flight I used the FullSend 6S 3300mAh battery from iFlight. The Bob is quiet heavy with the GoPro and this battery, but okay. I also use a Tattu R-Line 6S 2200mAh battery for my flights with the Bob. Less flight time, but more agile...

@@flipsfpv Got it. In your opinion how does the 3300mAh and 2200mAh feel to fly. Sorry for asking too many questions. I basically have the same quad and have been using it for some time. I have been flying 1850mAh GNB batteries, which are fun to fly without GoPro, but gives only 3-4 mins with GoPro. So was thinking whether to buy a 2200mAh or 3500mAh DOGCOM (those are the only 2 options I have). Also I don't have a lot of mountains where I live, but I would like to surf and dive my quads on mountains whenever I get a chance. So which one of these batteries would you suggest I buy?

No problem! I was facing the same decision. If I have to choose, I will recommend the 2200mAh battery. You can get 7-8minutes flight time with some climbing. If you want to go higher and longer, go for a bigger battery like the 3300mAh.

Your comment makes no sense, bro 🙃 The gyro data is manipulated by vibration, so the gyroflow output is shaking. There are several videos and reports about this problem with the O3 AirUnit out here on TH-cam and i.e. reddit. Just search for "O3 shaking video" or similar... I'm glad you haven't had any problems with gyroflow so far!

Oh! Vertauscht angelötet? Normal sollte das GPS davon keinen Schaden nehmen, sondern einfach nur nicht funktionieren 👍🏻

@@flipsfpv alles top 👍

With Crossfire 😉

@@flipsfpv perfection

Hi, I have frame version 1.2 - I think the frame version 1.4 is already prepared for the O3 cam and Air-Unit according to the iflight website. So you can follow this guide, but don't have to print the custom mount 👍

Thank you! Yes, according to the data you should go with 4S for long range. However, I prefer 6S because I don't like the flight behavior with 4S 🙃

Thank you! Yes it's the video feed from the Vista recorded by the Goggles V2 :)

Thanks 👍

@pottyputter05 I fly with betaflight

Hey @SalmaDrone, for this flight I used my GoPro12 without HyperSmooth. I stabilize the footage with Gyroflow. With the GoPro12 I have problems with the footage taken on the BOB57. With other GoPros I don't have the problem. Also I don't have problems with the GoPro12 on other drones... I think it is a bad combination of the GoPro, the mounting and the motor frequency.

@@flipsfpv wow. Interesting. Earing that now I really have a problem to decide between bob57 and chimera 7. Thank you my friend

Hi @MaxLoew-ds5ez, die BOB57 ist auf jeden Fall eine gute Drohne für LongRange und cinematische Aufnahmen. Das Versprechen von iFlight ein Mix aus LongRange und Freestlye zu sein, kann ich nicht bestätigen. Die BOB57 ist im Vergleich zur Nazgul viel weniger agil. Ich fliege beide Drohnen (Nazgul & BOB) seit ca. 2 Jahren und fliege viel lieber die Nazgul, da sie sich präziser und berechenbarer steuern lässt. Hoffe das hilft dir weiter.

@@flipsfpv ohh ok verstehe. Die Nazgul dann auch besser geeignet für Videos oder kriegt das die BOB auch hin - wenn es mal kein log Range video sein sollte. Krassen Freestyle werde ich wohl eh nie machen oder wenn, dann mir dazu eine eigene drohne bauen. Vielen Dank für die Antwort :)

Welche für Videos besser ist kommt auf den Anwendungsfall drauf an. Für langsame, cinematische Aufnahmen (Landschaft, Berge, ...) würde ich die BOB57 nehmen, für schnelle Aufnahmen durch Hindernisse hindurch eher die Nazgul :)

Hello, thank you! Note that there is a "minimum distance to home" for the GPS to work. You can configure this distance in Betaflight. If your drone is within the minimum distance, the drone will stop its motors. If the drone is further away than the minimum distance, the drone will start gps rescue (if configured correctly).

@@flipsfpv thank you my friend. Minimum is 50 mts. May be is that. I will check.

@@flipsfpv great 🙌🏻💪🏻

So it works now? Great to hear that 😃

@@flipsfpv let you know. I Will try it bro

Thanks ✌️

Thank you! I use the "Fullsend 6S 3300mAh" from iFlight and can go up to 10-12 minutes when flying mountains in cold conditions. I also use the "Tattu R-Line 2200mAh 6S V1" reaching 6-8 minutes when moutain surfing. I fly with a GoPro Bones mounted to the BOB.

It can be used "plug and play" without connecting SDA & SCL 👍

@@flipsfpv so why you solder? I have nazgul evouge vista kinda confused thought only quick connection

@Cinoo90 becaus I want to use compass and so I have to use SDA & SCL connection. Also I solder the other pins directly to the board to have all wires going the same way to the FC. And the connection-wire from the GPS comes with a plug only on one side. So I used the plug side to connect to the GPS module and the "open ends" to connect to the FC. Do you see any disadavantages from soldering the connection?

​@@flipsfpvok so i can go without sda scl... RTH will work fine then?

@Cinoo90 yes, RTH works without SDA & SCL 👍

Thanks ️👍

Thank you! ✌

Hi! Yes, unfortunately you will need to purchase another TPU/plastic part or print one yourself... You can find many 3d files for mounting the GPS on your drone online. I use thingiverse or cults3d most of the time. I had mine printed by a friend. In Germany there are also several shops that offer printing services. Or you can find someone in your country on a discord server or online forum.

Hi, glad you like it! Yes I had to cut the connector cable and solder it to another connector. I used the original connector cable from the O3 and the old cable from the vista. You can see the wiring in the video at 1:11

Hi, you ask about the frequency of the video transmission? As far as I know, the DJI AirUnit and goggles manage the frequency automatically. I have no way to change it.

@@flipsfpv I meant also an upgrade antenna for The Goggles for O3 .. most Of The aftermarket ones are only 5,4 GhZ .. Are u flying the stock goggles antennas ?

@@VikSim_VS ah ok now I understand the question. I'm flying most of the time with the DJI Integra goggles with stock antenna. Range is about 2km without obstacles. For longer ranges I use the Goggles V2 with the TrueRC X²-AIR 5.8 MK II antennas: 5,8 Ghz. Better range, but the image quality is better with the Integra. The TrueRC X²-AIR 5.8 antennas are available for the Goggles 2, too. I think this is the best combo for cinematic long range flights 😀

@@flipsfpv i have The V2 goggles, but does the O3 also use the 2,4 ? I just don’t want to lose my drone while flying to a mountain or so, sometimes I see people not losing their signal while me on my FPV Dji drone it’s not possible. But the O3 has a stronger signal. Will Look after the antennas you mentioned

@@VikSim_VS the 2.4 GHz and 5.8 GHz frequency bands are used for reception (O3 AirUnit). However, only the 5.8 GHz frequency band is used for transmission. So you are good with the 5.8 antennas. If there is a probleme with the freqeuency, you will noticed this before flying far away 🙃