- 377
- 4 862 336
DIY with Cam
United States
เข้าร่วมเมื่อ 7 ก.ย. 2020
DIY cam is here to help you take on your next DIY project. Whether it is a large how to video or a review of the tools that we use to complete our projects. With short, easy to follow videos that give you exactly what you clicked on the video for, your time is important and DIY tasks don't do themselves.
Product and tools I use from amazon - www.amazon.com/shop/diywithcam
Instagram - diywithcam?hl=en
Email - cameron@diywithcam.com
Product and tools I use from amazon - www.amazon.com/shop/diywithcam
Instagram - diywithcam?hl=en
Email - cameron@diywithcam.com
Will My Childhood Thunder Tiger EB4 Nitro RC Car Still Run after 20 Years?
Starting my thunder tiger eb4 for the first time in 10 years. I totally forgot about my Thunder Tiger Eb4 RC Car and it had been left in the garage for 10 years. Luckily my brother found my 20 year old RC car and shipped it to me. Can I get this 20 year old Gas RC car started and relive some childhood memories?
Join this channel to get access to perks:
th-cam.com/channels/cuESzdfVB4g814uAp4kV0w.htmljoin
Check out the tools and products that I like to use from amazon; www.amazon.com/shop/diywithcam
Links above are affiliate link, and I may earn a small commission if you purchase through one of these links.
If you have any questions or would like to contact me, please use this email: Cameron@diywithcam.com
Join this channel to get access to perks:
th-cam.com/channels/cuESzdfVB4g814uAp4kV0w.htmljoin
Check out the tools and products that I like to use from amazon; www.amazon.com/shop/diywithcam
Links above are affiliate link, and I may earn a small commission if you purchase through one of these links.
If you have any questions or would like to contact me, please use this email: Cameron@diywithcam.com
มุมมอง: 653
วีดีโอ
How to Install Ecobee Smart Thermostat Without C Wire
มุมมอง 309 ชั่วโมงที่ผ่านมา
It is possible to wire an Ecobee thermostat with only 2 wires but you do need to by an adaptor to make this work. Don't worry, it isn't complicated, an isn't going to cost you a lot of money. Follow this video as I show you how to connect an Ecobee when you only have 2 wires. Join this channel to get access to perks: th-cam.com/channels/cuESzdfVB4g814uAp4kV0w.htmljoin Ecobee Thermostat - amzn.t...
How to Sand Hardwood Floors for BEGINNERS
มุมมอง 18319 ชั่วโมงที่ผ่านมา
Sanding hardwood floors is much easier of a project than people thin it is. You can sand your hardwood floors as a DIY project as long as you plan, take your time, and understand the machines and processes. Sanding hard wood floors as a DIY project can save you thousands of Dollars. In todays video I'm going to show you how I sanded the hard wood floors in my house to get them ready for finish....
Very Few People Know About This Dishwasher Cleaning Secret
มุมมอง 933วันที่ผ่านมา
The real reason why dishwashers are not cleaning your dishes after 2 months can be solved with an easy fix, that costs no money, can be completed in minutes, and many people don't even know that this has to be done regularly. The detergent you use or a cleaner is not going to fix how your dishwasher cleans, if you don't do this task. If you are tired of dirty or smelly dishes, watch this video ...
How to Remove and Clean GE Dishwasher Filter
มุมมอง 16514 วันที่ผ่านมา
How to remove and clean GE dishwasher filter to stop your dishes from smelling bad. GE dishwasher filter cleaning should be done every month depending on how often it is used to make sure your dishes are always cleaned well. PRODUCTS AND TOOL I USE: Amazon Storefront - www.amazon.com/shop/diywithcam If you have any questions or would like to contact me, please use this email: contactdiywithcam@...
How Layers of Wax are Removed from Hardwood Floors
มุมมอง 130หลายเดือนก่อน
How to remove wax polish or shellac from hardwood floors before refinishing. It is common for old hardwood floors to have a wax applied. This was intended to rejuvenate the floor and make the floors look less tired. This is great until the time comes to refinish the floors, as a sander won't work as the wax melts and clogs the sand paper. In this video, I will show you one method of removing th...
How to Install Lumary Permanent Outdoor Lights Max
มุมมอง 291หลายเดือนก่อน
Lumary Permanent Outdoor Lights are a GAME CHANGER for Christmas Decorating. This will be the last time that I hang Christmas lights as the permanent outdoor lights from Lumary can be left up all year and can be set to different colors or scenes, depending on the holiday. Get you Lumary Permanent Outdoor Lights Max here - amzn.to/4fYGnCM If you have any questions, please let me know - Cameron@d...
Easy Gardenreet Pathway Lighting Upgrade
มุมมอง 196หลายเดือนก่อน
Are you fed up of a dark pathway? Stop using poor quality solar or battery pathway lights and upgrade to Gardenreet Pathway Lighting. Get your own Gardenreet pathway lights here - amzn.to/4eIqm2K You can find the landscape wire and transformer box on the Gardenreet website. They currently have a sale on for Black Friday. www.gardenreet.com/collections/path-lights/products/12v-die-cast-brass-pat...
Ryobi Couldn't Fix this Broken 40V Mower
มุมมอง 1062 หลายเดือนก่อน
Are the Warranties that Ryobi offer on their tools worth the hastle of registering the products and filing a claim? My Ryobi warranty experience for the Ryobi 40V Lawn Mower. Receive videos and product recommendations from DIY with Cam directly to your inbox: diy-with-cam.ck.page/f7d04a4f56 Check out the tools and products that I like to use from amazon; www.amazon.com/shop/diywithcam The links...
How to Prime Wagner Paint Sprayer - Control Pro 170
มุมมอง 4912 หลายเดือนก่อน
How to prime the wagner control pro 170 hea sprayer. Not priming your HEA sprayer is going to cause inconsistent spraying, or you will spray with any liquid left in the sprayer while stored. Follow these simple steps to make sure that you prime you wagner 170 pro sprayer correctly. Wagner Control Pro 170 - amzn.to/3Y3FzW2 Check out the tools and products that I like to use from amazon; www.amaz...
Are Home Depot Unfinished Cabinets Worth Buying?
มุมมอง 3.7K4 หลายเดือนก่อน
Are Home Depot Unfinished Cabinets Worth Buying?
The Fastest Way to Removing Carpet Grippers
มุมมอง 3574 หลายเดือนก่อน
The Fastest Way to Removing Carpet Grippers
Why Were These Hardwood Floors Covered?
มุมมอง 464 หลายเดือนก่อน
Why Were These Hardwood Floors Covered?
How to Remove Trim Without Damaging Walls
มุมมอง 994 หลายเดือนก่อน
How to Remove Trim Without Damaging Walls
We Bought a Fixer Upper! | New House Tour
มุมมอง 1K4 หลายเดือนก่อน
We Bought a Fixer Upper! | New House Tour
How to Remove and Clean Whirlpool Dishwasher Filter
มุมมอง 9815 หลายเดือนก่อน
How to Remove and Clean Whirlpool Dishwasher Filter
Testing the CHEAPEST String Trimmer on Amazon
มุมมอง 1695 หลายเดือนก่อน
Testing the CHEAPEST String Trimmer on Amazon
How to Rewind String on Homelite String Trimmer
มุมมอง 9405 หลายเดือนก่อน
How to Rewind String on Homelite String Trimmer
I Bought the Cheapest String Trimmer from Amazon
มุมมอง 3445 หลายเดือนก่อน
I Bought the Cheapest String Trimmer from Amazon
Bad Boy Weed Eater String Replacement
มุมมอง 8006 หลายเดือนก่อน
Bad Boy Weed Eater String Replacement
How to Assemble Bad Boy String Trimmer
มุมมอง 2166 หลายเดือนก่อน
How to Assemble Bad Boy String Trimmer
Automate your Sprinklers with Lumary Smart Water Timer
มุมมอง 2126 หลายเดือนก่อน
Automate your Sprinklers with Lumary Smart Water Timer
Easiest Way to Remove Bugs from Your Car
มุมมอง 8826 หลายเดือนก่อน
Easiest Way to Remove Bugs from Your Car
How to Build a Basic Miter Saw Workbench
มุมมอง 6626 หลายเดือนก่อน
How to Build a Basic Miter Saw Workbench
How to Remove and Install Cub Cadet LTX1045 Deck
มุมมอง 2.1K7 หลายเดือนก่อน
How to Remove and Install Cub Cadet LTX1045 Deck
How to Fix Vinyl Windows that Won't Stay Up
มุมมอง 2707 หลายเดือนก่อน
How to Fix Vinyl Windows that Won't Stay Up
Finally it is alive 🤩
Bro just start it with you’re had on the glow plug starter!😂 watch it pop off it driving me crazy rn lmao
I got there eventually. 🫠 I've never had to do that before. This cheap starter sucks. I think when I upgrade, it will start much easier.
Thank you
Watching that glow plug igniter flop around was painful.
That's because I was cheap and got the least expensive one on amazon because I kamet sure if the car would even start. Now I know that it runs, I'm getting a better one.
@@DIYwithCam Gotta work with what you've got! I meant it looked painfully frustrating lol.
Thank you for this information! Can you please tell where we should add salt in this model?
I've never added salt to mine, only a drying agent. I don't have this model anymore so can't check.
starting this thing is nightmare
couldn't agree more
@loonywalker6729 1000% but so worth it after it's started. I ran out of gas yesterday, and it took me 5 minutes to get it started again 🙃
Normally, if the engine is well adjusted and used regularly, nitro engines start super quickly. I would also always use an engine heater@@FFSChosen
Used to have one of these my self, did a rebuild on my channel. They are so much fun!
That's so cool. I haven't had to do a full rebuild, but it's something I am looking forward to. It's so cool, and I'm so glad I shipped it. What kind of rc car do you have now?
@@DIYwithCam i love rebuilding RC cars, and instead of buying new ones, i rather save one! got fair few, HB lighting GT, Maverick Quantum+ Flux, Hosim venum and a few others :D all have been bought second hand and rebuild. What have you got?
@FFSChosen I only have the thunder tiger, but I'm definitely looking for another one. I raced a battery-powered rc car yesterday that was pretty fast and absolutely smoked it.
❤❤❤❤ thank you. I don't know if there's more to be fixed, but I do know I was able to retrieve a broken piece of dish from God knows when and hair. A lot of hair. Cats, rocker musician husband who helps out bc he's a good dude, just like you! Thank you
Thanks for the the simple and quick explanation. Dont let the guys with the tisim going on and on about the foam sleeve bug ya. They dont understand its not required for the demo.
This vid proves it. Do no use the tepee method
I love your Scottish accent?
Quit! Just scrape! Don't rinse!
I prefer rinsing but scraping does a good job too. Rinsing gets more off the plate than scraping in my opinion.
@@DIYwithCam Why? I want the detergent to work hard. Because, there are enzymes in the detergent. If you pre-rinse your dishes, you're not giving the detergent the chance to do its job. I do not baby my dishwashers. NEVER!
@jeromedavis8575 correct, I don't clean the dishes. I just get the big bits off, so the dishwasher still does its job, just like I said in the video.
@@DIYwithCam Actually, the dishwasher already does a pre-rinse, so I find it unnecessary to run them through the faucet.
Get the 24V adaptor I am using on amazon - amzn.to/3W5MrCc
Interested in getting some Blink cameras of your own, then check them out on amazon - amzn.to/3YD7dsR
Finally a straight forward video without 30 mins of talking. 🙏🏽
I'm glad I could help you out in a timely manner. I have plenty more helpful videos on the channel that are short and straight to the point, Go and check them out.
If you want to see what the house looked like on closing day, watch this video next - th-cam.com/video/FKMkqg3uLz8/w-d-xo.html
Your very first action, turning that black piece to free up the long grey arms... Mine won't turn. The black piece won't budge, at all. I am definitely turning it in the correct direction. Does anyone have a solution?
My frigidaire doesn't have that tab you used to take the sprayer arm off. My filter has crud underneath but I can't remove it! Frigidaire calls this filter "self cleaning" but it is most definitely not. I scrape and rinse my dishes, because even though many say you don't have to, I have experienced a moldy dishwasher, and it's not failing to dry it out between washes that causes it, it's all the crud inside it's workings. It needs to be cleaned, but how do I remove one that doesn't have the tab?
Thank you, you saved me so much effort, money and time. Thumbs up the video if this helped you too!
I'm glad I could help!
Thank you my friend! I’m about to look like the hero for smores tonight.
Enjoy your s'mores and your fire pit!
@ We kept it going for hours and treated quite a few our neighbors to a s’mores. Man, it’s the simple things! Thank you again for this video.
@@Ant2fit I'm glad you enjoyed the fire, smores and the company. Thanks for coming back and letting me know how the fire went, it's great to hear when I have helped people.
Thank you
Glad I could help!
I just got a fire pit and struggle to keep the fire going. The wood burns really good for a bit and then turns black and the flame is gone. What am I doing wrong? I also live near the beach so I’m assuming my wood may have some moisture on it as well
that sounds like moisture. Don't overload the fire and try cutting the pieces that you do have into smaller pieces. They catch better and should help to keep the fire going. It's best to use dry wood for fires, so the above may still not work.
I just got a fire pit and struggle to keep the fire going. The wood burns really good for a bit and then turns black and the flame is gone. What am I doing wrong?
Never knew about the filter. Thank you for the tip!
Glad I could help! It's crazy that the manufacturers don't make it more clear in the directions that this is needed.
Great coverage 😂
It covers every square inch, a little slower operation than a standard sprinkler, but this way, you know that the entire area has been watered. It's only good for small yards, 2,000sf and under.
Thanks.
You are missing a cloth cover eith retainer clip over that filter its meant to go over it and option of using it as is or with a dust bag
I sure am. It never came with my vacuum, so I just run it as is.
Great tips for starting a fire pit the easy way! 🔥 If you're looking for expert fire pit services, I highly recommend Bakersfield Fireplace Inserts in Bakersfield. They helped me set up a perfect fire pit, and it’s been amazing ever since!
0:10 Just put some masking tape on there and it will get a better grip on the masking tape.
I will give it a try. I barely use this model now as I have a Bad Boy trimmer now that is much better.
I’ve lived in my first ever apartment alone for just over 2 years, and nobody ever told me about this. Awhile ago, I complained that the dishwasher was having a sewage-like smell after running. Now, it all makes sense. I’m curious if the gunk I just scraped off of that was entirely mine or if it’s from even longer than 2 years ago….
It depends on what you run through your dishwasher and how often it is run. I just cleaned the filter on our new 1 month it dishwasher and it was gross. We run our dishwasher at least once a day.
It didn't work out 😞
Make sure the wood is dry and you have some good thin and dry kindling.
Would wax work? Like melting wax into the lint?
I dont see why not, candle wax worked
I don't know if this will stop the issue I'm having, water leaking from under the dishwasher, but I figured I would start here! These instructions are so easy to follow, this dishwasher is similar to mine. I've had it two years and this was the first cleaning. Fortunately, it wasn't as gross as the one in the video. I only use it once a week, and I scrape my dishes before they go in. I'm a senior with mobility issues but it was still easy to take apart, clean and put it back together. I managed to complete it in less than 15 minutes. I am running an empty short cycle right now, I placed a bowl of white vinegar on the top rack and bottom rack. I sprinkled some baking soda in the bottom, about 3 Tblsp. and it's running. I am hoping this unplugs whatever was making it leak onto the floor. If not, the next step is calling the plumber!
I would call a plumber or a hany man, it could be the supply line leaking, or the drain.
You have to make sure the wide part is in first or else you have to beat it with the little black tool
exactly as I did in this video. I just put some more of this flooring down and was experimenting without using the little black tool and it is possible to connect the long length first, then tap the short edge with the hammer. I was still finding some gaps with this method so I ended up using the tapping block to secure the long edge first, and then tap the short edge in. At the end of the day, both floors look great and the slightly different way of installing hasn't caused any issue with either floor.
So any other suggestion would be wonderful before I go out and buy another one
OK great on the example you just did because I was making a a lot harder right my question is that nobody can answer is it was filling up so I thought it was a clogged filter and all that other stuff I just got done taking off the filter like you just did cleaned all that out, wet dry back out sucked out all the water took apart at the garbage disposal but now my problem is and has been I thought it was a latch not connecting because the machine will turn on a normal hit start all the lights come on in the 10 seconds later it’ll turn all off. So I don’t know nobody even at Frigidaire can explain it other than send out a repair person but by the time you go with that cost might as well just buy a new dishwasher cause they certainly don’t make dishwashers or any appliances like they used to I used to live in the house for 24 years and never had to replace any appliances I’ve lived in this house for seven years already had to replace my LG microwave After I replace the magnetron once and it worked for another year but that was it and then I just got done replacing the latch thinking that was the connection because you could tell that the latch had some oxidation it the pins
you took the drain hose off at the garbage disposal, but is the drain hose clogged? I replaced mine before I moved and it was disgusting.
It's been 1.5 years and I still haven't gotten my fast charger either.
Send Ryobi an email. That's what I did to get the charger. The fast charger is so much better than the standard slow charger that they sell with the auger.
why all these video does not have just one product , is very expensive you must as well buying other from the market, Bleach and Detergent, why both?? and not just one ?? the others are the same, Vinegar, Detergent,etc there should be one product
Buy the pre-made vinegar weed killer from the store. It's a lot more expensive and way too strong in my opinion.
Thank you.
Just what I needed. I'm lucky I didn't break it. Without this video I would have... I wash jars and the labels come off so I need to clean it often.
yes, the labels do get caught in the filter. I'm glad you found the video and now your dishes will be clean.
Wrap some silicone tape around the shaft under the handle and it’ll stick like shit to a blanket but it’s non adhesive so the handle can easily be removed or repositioned
Thanks for the suggestion. I will give this a try when it warms back up and I need to get the weed eater out again.
even easier method- all things as in the video plus add little sprays of diesel ( remember no gasoline as that is too volatile and definitely avoidable) via a nozzle bottle... your fire shall be lit with great ease... try it first.. thank me later😊😊😊
If I had a reason to keep diesel in a a can, I would try this but it really isn't needed for this method. Maybe if you need the fire started super fast then yes, but I am never in that much of a hurry, fire pit time is all about relaxing outside with a nice whisky or cold one.
Looks good but you could have put four together.
4 didn't quite fit in the space with the design we wanted, plus we don't have that many shoes. Lol. We do, but they are winter boots and don't fit.
Kindling on top is useless. Fire is already caught by the time the kindling catches
Lies, kindling still catches first and burns from the top down. Don't knock it until you have tried it. It's a much easier way to build and get your fire started.
@DIYwithCam do you think I can't see? The fire is burning from the bottom. I don't know why you think I'm the liar. It's a stupid method that makes no sense, so you are the liar
@barrybeattie6070 Barry, I would get a new optician or visit one. There is no way the bottom logs catch first. Even if they do, it's still a top-down fire. Have a Merry Christmas. Hopefully, you don't open someone else's gift.
Absolute legend saved our fire night
Glad to help. I hope you enjoyed the fire night.
I was 41 years old when I found this video. I've lived in this apartment for 10 years. You don't even wanna know what it looked like. Thank you!
Glad to be of service! It's never too late to learn something new.
Thank you
Glad I could help.
Good clean and plenty
Glad you enjoyed the video!
Julle prt poes