วีดีโอ

😮😮😮

you guys have some banger music

good products , it changing our live every day

I either stick weld or TIG... Never had any reason to buy a good MIG machine until now. Apparently, the nozzle vs TIG cup isn't as critical, just don't obstruct the shielding gas with your tip and nozzle combination. That's what I got from the video. MIG is an easy process, not quite as involved as TIG and your hand isn't getting smoked! 😆

Appreciated information, did not collect all but will repeat until known, Thank You for providing valuable information!

I think she is a robot

I wonder if the tips work longer on water-cooled burners? And how much longer - 2-3 times?

<3

is there a ceramic coated nozzle? i have problems with spatter sticking while welding upside down.

Anyone know how to get the service software into service mode

Könnt ihr damit auch auf unterschiedliche Spalt breiten reagieren?

If I have a welding machine that does not exceed 230A, which shunt do you recommend? The 150A 300A 500A. or can I just use the 500A.

66,000 waste of money

What brand is your Robot?

Seid dem Erscheinen der E 3, bin ich das was ich sagen muss . Ich Bleibe dabei was den AL Bereich Betrift. (Danke für die Probe Sendung an Privat Adresse) Leider muss ich Mitlerweile sagen das es zuviel Nach Ahmer der Elektrode gibt. Betrieblich, kann ich nur über den Einkauf gehen. Und dieser muss sich nun mal drauf Verlassen was der Anbieter Verkauft. Bin dabei Gewerbe Anzu Melden. Für mich nur Orginal Binzel E 3 , aber auch Litty bleibt was se sind. Und Bleiben im Bestand. Gruß Ralf Söhler

Was kann mir das sagen und wie funktioniert das?

A big problem with all torch extraction systems is they are very heavy and rigid. On torch extraction torches are much heavier and the large rubber pipe that is often wrapped in leather makes the torch many times heavier than a regular torch. The big pipe also adds a lot of resistance and so you have to stop to reposition the pipe as it will snag on your bench/work. They are also very difficult to bend and push back against you wrist. The amount of fatigue and repetitive strain is unbelievable, this is one of the main reasons i'm leaving my workplace to weld somewhere else. I'm sick of waking up in the morning not being able to move my fingers.

Your west coast sales rep. ( Craig) , sucks. He doesn't respond to calls. You have great products but your customer service in the U.S. is lousy.

😮

Ещеееее

These guys gave us some welding guns. We are going to try them out, they seem durable. Just waiting on them to deliver some fittings they forgot. 😂

Какие классные вещи делают в городе САРАТОВ 😂😂👍👍

the 2% looks like it was deliberately sharpened wrong to increase arc wonder.

Розказали і показали!!!! Дякую! Але потрібно в назві ще прописати російською та українською мовами "ремонт пальників". Тоді переглядів буде більше, так як люди будуть швидше знаходити даний контент. Дякую.

Hallo, die 50,6 kontrollieren, wichtig.

Good video. I just have never gotten used to "up talk" though.

Bonjour, je m'appelle Jimmy ! J'aimerais vous demander si vous pouvez nous faire aussi une vidéo qui montre comment connecter le refroidisseur, comment ça marche avec la machine tig,...

The push-pull gun is the best idea I have seen in ages. I am not a welder, just a certified auto repair tech since 1978. But, a modern auto body & paint shop has to have at least one trained aluminum weld tech as front drive vehicles have used thick aluminum welded and bolted sub-frame parts that hold the engine, transmission and in some cases the entire front clip. That is genius compare to spool gun welders others sell. They should recommend a new liner and one size larger than the aluminum wire ran thru it so it has less of a chance to bind up or birds nest. Plus, I bought a new stainless steel brush but I keep it inside two plastic gallon zip bags. I but few ever do that. That for sharing... Just great.

Once a test piece has been ran, tested, x-rayed even, it can produce part after part repeatability 24 / 7 / 365 until it needs gas or wire! Absolutely great technology. I wish I was able to work, build, test or sell this kind of outstanding equipment. Congrats folks.

I can't read the text but it looks like the stator of an electric motor laser welded. Very good! DK, auto ASE Master Tech Since 1978, retired. Thanks for sharing.

I really like a company the goes out of it's way to be better. I diagnosed them and repaired the root cause. That I could take pride in. Those days are behind me. Your team must proud. I would work on customers cars on my Saturday off to get time on flag sheets for the week. I was the Isuzu tech at the only dealer in Omaha. Buick guys wouldn't work on the Troopers, Rodeo, etc. I would tell them that if I hurried and got it done, parts, labor and keys would be in front of new car show floor locked. Do what you do on Sunday, swing buy and Monday is normal. That shocked people. That made me happy. I found this sweet video while looking for the spring and new gas nozzle. I can draw and measure metric or std. but this was my MIG welder from 1984, called Deca MiG 616-S but have the paperwork. Wow! Close but not sure. They call the torch MB 25 AK that is 150 amps. The nozzle and retainer spring is simply taped on. The handle says W. Germany. The oldest of 4, family farm, I cut wheat on a real old John Deere combine. Anything with a motor a grocery store tools in a town 5 blocks long. You were 4 miles from town. Best to you guys! ASE Master Tech since 78.

لكم الشكر والتقدير على هذا الإيجاز العلمى ونرجو المزيد مع وافر الشكر والتقدير

Thank you for your time

*promo sm*

I am surprised that anyone today offers an air cooled robot torch, even low power applications with a high uptime robot quickly degrades an air cooled torch consumables and gives rise to wire feed and gas coverage problems etc, the torch difference in cost is minor compared to the overall robot system investment.

How much for the extraction system which obviously needs to go with it? Or the package together in Australia? Cheers

Esse produto é o ewr 2 ?

Do the different necks effect duty cycle?

Do I have to replace the mig liner if I go up in wire size? I bought my first mig welder. The MIG welder is currently set up for solid wire 0.6. I want to do flux core .9. I have a 0.9 tip and the .9 feeder wheel. Do I need to increase the size of the MIG wire liner, or does the migliner just come in one size? What liner should I use for a flux/core .9 (.035) wire?

Almost brought a tear to my eye...maybe its just slag... nicely done.🥲 Can't wait to put mine to good use!

Ещё ещё

Coole Schweißer! 🙂

Thank you for sharing this with your audience. 😊🌎✨

Yawn 🥱

Eine richtig gute Werbung

Cooles video

This is very good content. This man know his stuff. Thank you Sir.

How much cost for this package

she's reading all this information