This guy sounds like a sales rep ,Solo Pro gear adds lift ?? REALLY give me a break , I know cause there's alot of air getting around all those parts !!! F☆☆kin donkey !!!
Was wondering if you have had trouble with the tail rotor motor shaft gear wearing out.? So far that has been a trouble spot for me. The motor doesnt burn out. Only the gears wear to the point where it will not turn the tail rotor fast enough to hold the copter steady. Im looking for an upgraded motor for the tail hoping it has better quality gears.
I just broke my Propel Speed Star, and ordered a new V911 Pro. I got the fish eye swash plate, and carbon main shaft. Also ordered the paddle flybar. I'm excited to try it out.
Is Hero H911 pretty much a best flying heli out there, of this size? I have a Syma F3. It has extremely quite gear mesh. It's pinion gear is plastic. I noticed these have brass pinions. Thanks for sharing.
excellent video mate, will definitely get those upgrades but will they fit mjx f47? and the plastic is spelt wrong on those packs, its Derlin plastic AKA acetal.
From MY experience with the V-911 and V-911 PRO not so great in wind above 3 mph does that make them bad not at all the V-912 and V-913 are better suited for wind then again 3 mph or less anything greater I would not fly outside. They are Great R/C Copters for what they are and cost.
I found a shop that has the swashplates, but weight stated for it is 10 grams. Sounds kinda a lot. I haven't weighed the original, but doubt it's nowhere near that much.
The metal swash plate is a little less than 1 gram more than the plastic one and the metal rotor head actually weighs less than the plastic one making up a little of the difference, but a full alloy upgrade adds close to a gram, shit all !!! The full metal swash plate is fine.
hi my friend what should i spend all money for that the v911 bnf just $15 note also i fount when u charger the battery v911 it show you full when i tested to another charger it give me another 10 minute charging full lol means the cahrger of v911 dont charge full thanks
My wife bought me a "toy" heli this past Christmas. I had so much fun with the thing that I now officially have a new hobby. In less than one month I've purchased 5 more helicopters including the Hero H911. What a great flying little chopper! I plan on doing the mods from your video 'cause I like to tinker with stuff. My last hobby was building a Sonex (real airplane) in my garage.
Put some hot glue over the little board in front of top board, I did it on all 3 of my MJX 45 so IF you CRASH you don't need a new top board,it's is in a great spot to take a frontal impact from a nose dive. Just encase the whole thing. Don't let glue run into the led front plug... IT HELPS A TON!
www.buzzflyer.co.uk/Nine-Eagles-Upgrades/Solo-Pro-Bravo-SX-Metal-Swash-Plate-XNE002/p-158-1823/ but this option is available now, don't think it was when he posted this video. www.amazon.com/gp/product/B00D6BOYAM/ref=ox_sc_act_title_4?ie=UTF8&psc=1&smid=ARMKB9DGMAOM2 I have the one off amazon.
Just ordered my v911 and hope to upgrade like you did! Amazing video and loved the way you shared the part numbers. Please make a video if you can on how to install the upgrades. That would rock!
Wow! Fantastic video and thanks for all the details that most others don't take the time to document. I'll be trying most of your modifications and let you know how it goes for me.
Thanks for the info, but...... DAMN!!! i just ordered the basic v911 (with new type batt.) last night!! i was choosing between the 1 i bought and the pro aswell !! typical lol !! thanks again anyway :)
yeah there are loads of these around, and clones popping up everywhere IMHO the H911 is the best looking and I prefer it for the fun factor (hard to get outside the USA) The latest version is V911 PRO -- more robust frame, slightly longer tail, same mechanical parts as earlier V911
p.s in response to ben chya's comment................. i live in uk and the v911 will cost me around $42 which is around £30, then around another £30 for the upgrades........ once done my heli will be around the same specs as the upgraded solo pro........ the upgraded solo pro will cost me around £270, where as the v911 with this mod will cost around £60.......... BARGAIN!!!
hi Luckyman7382, good video ;) I too am gonna try this mod, i've found where to buy all the parts from no probs. but when i try to buy the heli (with controller) ....... there are soooooooo many different types of the v911????? which one should i get?? (i want the best one but that will fit all the parts in ur vid.) ??
Good info.. already subscribed sir,if u free please come to my channel to support my channel tq..
This video while very informative is six years out of date in that most of the parts mentioned are no longer available.
Im your 100th subscriber ...yay me... and congrats to you dude
focus
bought a h911. and it spins on take off and the yaw is slightly on on the time ....is there a clutch or adjustment on the copter for that.
This guy sounds like a sales rep ,Solo Pro gear adds lift ?? REALLY give me a break , I know cause there's alot of air getting around all those parts !!! F☆☆kin donkey !!!
Where do you order these parts please respond
How much did you spend on this
I'm thinking about buying a v911 is this a good idea?
I think you omitted the part number of the Carbon Fibre main Shaft. Could you give it please? Great video by the way!
Looks like the bear was a bit of a ham !!
Was wondering if you have had trouble with the tail rotor motor shaft gear wearing out.? So far that has been a trouble spot for me. The motor doesnt burn out. Only the gears wear to the point where it will not turn the tail rotor fast enough to hold the copter steady. Im looking for an upgraded motor for the tail hoping it has better quality gears.
Where is this zoo? Is louisville ky?
I just broke my Propel Speed Star, and ordered a new V911 Pro. I got the fish eye swash plate, and carbon main shaft. Also ordered the paddle flybar. I'm excited to try it out.
Where can I find the screw for the fly bar or balance bar, mine came out and I cannot find it
i flew my h911 today about 5 mile winds and it did great
ru.aliexpress.com/premium/v911.html?needQuery=n&SearchText=v911&enSearchText=v911&CatId=202004604&shipCountry=ru&initiative_id=SB_20140816234946&isrefine=y
cool stuff nice upgrades
Is Hero H911 pretty much a best flying heli out there, of this size? I have a Syma F3. It has extremely quite gear mesh. It's pinion gear is plastic. I noticed these have brass pinions. Thanks for sharing.
My V911 shakes a lot after going left/right/forward/backward help
Tighten the screws everywhere
Hi great video will the swash fit mjx f47
excellent video mate, will definitely get those upgrades but will they fit mjx f47? and the plastic is spelt wrong on those packs, its Derlin plastic AKA acetal.
Would the v911 do okay outdoors with a liitle wind? please reply...
It will do ok in a little wind < 5mph
From MY experience with the V-911 and V-911 PRO not so great in wind above 3 mph does that make them bad not at all the V-912 and V-913 are better suited for wind then again 3 mph or less anything greater I would not fly outside. They are Great R/C Copters for what they are and cost.
Am i missing the flight video? (Totally possible/probable)
have you flown the mjx 45? was wondering what you preferred the mjx or the v913?
Great video!, I have a Syma Extreme Stunt, do you think these upgrades will work on it?
Great video I have been looking to buy this 911 I think its a awesome looking little helicopter and thanks for all the update on the upgraded parts
I found a shop that has the swashplates, but weight stated for it is 10 grams. Sounds kinda a lot. I haven't weighed the original, but doubt it's nowhere near that much.
The metal swash plate is a little less than 1 gram more than the plastic one and the metal rotor head actually weighs less than the plastic one making up a little of the difference, but a full alloy upgrade adds close to a gram, shit all !!! The full metal swash plate is fine.
How much did you spend on the aftermarket parts in total?
what you prifare V911 H911
here the question before how much weight after how much weight thanks
hi my friend what should i spend all money for that the v911 bnf just $15 note also i fount when u charger the battery v911 it show you full when i tested to another charger it give me another 10 minute charging full lol means the cahrger of v911 dont charge full thanks
My wife bought me a "toy" heli this past Christmas. I had so much fun with the thing that I now officially have a new hobby. In less than one month I've purchased 5 more helicopters including the Hero H911. What a great flying little chopper! I plan on doing the mods from your video 'cause I like to tinker with stuff. My last hobby was building a Sonex (real airplane) in my garage.
From what i've read the canopy will definitely fit!! My question is will the v911 upgrade kit fit on my h911??
seen as you have both,can the h911 canopy fit the v911 would look sharp
Put some hot glue over the little board in front of top board, I did it on all 3 of my MJX 45 so IF you CRASH you don't need a new top board,it's is in a great spot to take a frontal impact from a nose dive. Just encase the whole thing. Don't let glue run into the led front plug... IT HELPS A TON!
no idea where u got that xne002 part from cause i cant find it any where all i can find is juat made out of metal? help me out ty
www.buzzflyer.co.uk/Nine-Eagles-Upgrades/Solo-Pro-Bravo-SX-Metal-Swash-Plate-XNE002/p-158-1823/ but this option is available now, don't think it was when he posted this video. www.amazon.com/gp/product/B00D6BOYAM/ref=ox_sc_act_title_4?ie=UTF8&psc=1&smid=ARMKB9DGMAOM2 I have the one off amazon.
Just ordered my v911 and hope to upgrade like you did! Amazing video and loved the way you shared the part numbers. Please make a video if you can on how to install the upgrades. That would rock!
Wow! Fantastic video and thanks for all the details that most others don't take the time to document. I'll be trying most of your modifications and let you know how it goes for me.
Which V911 is the fastest? What is the difference between the WL V911 version 2 & The helizone lightingbird? Please advise. Thank you in advance
Hi, is there really a big difference to that 9 $ Alu-Kit? because all that solo pro upgrades are about 35 dollars..
how do you change the tail fin?
O well, u can still get the V911 PRO BNF as a backup copter, about $20 from banggood :) (BNF means bind'n'fly, no transmitter)
Thanks for the info, but...... DAMN!!! i just ordered the basic v911 (with new type batt.) last night!! i was choosing between the 1 i bought and the pro aswell !! typical lol !! thanks again anyway :)
yeah there are loads of these around, and clones popping up everywhere IMHO the H911 is the best looking and I prefer it for the fun factor (hard to get outside the USA) The latest version is V911 PRO -- more robust frame, slightly longer tail, same mechanical parts as earlier V911
заснуть можно по твое гундениние
p.s in response to ben chya's comment................. i live in uk and the v911 will cost me around $42 which is around £30, then around another £30 for the upgrades........ once done my heli will be around the same specs as the upgraded solo pro........ the upgraded solo pro will cost me around £270, where as the v911 with this mod will cost around £60.......... BARGAIN!!!
hi Luckyman7382, good video ;) I too am gonna try this mod, i've found where to buy all the parts from no probs. but when i try to buy the heli (with controller) ....... there are soooooooo many different types of the v911????? which one should i get?? (i want the best one but that will fit all the parts in ur vid.) ??
Its gonna cost u 100$ for that upgrade its not recommended dude.