- 12
- 56 649
Reinier Hut
เข้าร่วมเมื่อ 8 ก.พ. 2013
Intex deluxe skimmer fix and howto with a low capacity pump.
This video is about the Intex deluxe skimmer, out of the box it's useless, it doesn't stay steady on the pool tubes, gets loose, loads of adjustments before it sucks water in, and with lower capacity pumps its not sucking in water at all...
Well thats over now... with an easy and cheap fix. You can create more suction with some ducktape and lead fix, maybe the lead isn't even necessary, it was already on there before. Try without lead first. By closing of gaps on the underside of the white bucket the suction from above becomes much higher, even with a low capacity pump as mine. Use a sponge to secure the skimmer better on the pool frame, it won't move anymore!, the pipes which come with the skimmer are too rigid, turn the pipe a bit on the pool connection to flatten out the skimmer on the surface, also adjust the white bucket to a lower point so that the blue bucket floats more on its own instead of leaning on the white one, this way the skimmer also stays more horizontal. Enjoy your skimmer people!
Step 1: close the gaps on the underside of the white bucket with Ducktape.
Step 2: put some ducktape on the blue bucket about 4cm down the edge, this way the pump sucks less water between the blue and white bucket, this way there is more suction from above. I made some kind of straps out of ducktape to get more thickness out of the tape otherwise you need a lot of tape.
Step 3: adjust the pipe on the outlet so, that the white bucket is horizontal.
Step 4: adjust the white bucket down so there is more room for the blue bucket to float and turn around, this way the blue bucket or skimmer also stays more horizontal.
Step 5: If it's not working, i used about 8 parts of sticky lead devided into 2 parts of 4 pieces on each side, 5 grams each. You can get these at your local tyre shop.
And youre done!!!! Id love to have some comments, thankyou!
Greetings from The Netherlands!
Well thats over now... with an easy and cheap fix. You can create more suction with some ducktape and lead fix, maybe the lead isn't even necessary, it was already on there before. Try without lead first. By closing of gaps on the underside of the white bucket the suction from above becomes much higher, even with a low capacity pump as mine. Use a sponge to secure the skimmer better on the pool frame, it won't move anymore!, the pipes which come with the skimmer are too rigid, turn the pipe a bit on the pool connection to flatten out the skimmer on the surface, also adjust the white bucket to a lower point so that the blue bucket floats more on its own instead of leaning on the white one, this way the skimmer also stays more horizontal. Enjoy your skimmer people!
Step 1: close the gaps on the underside of the white bucket with Ducktape.
Step 2: put some ducktape on the blue bucket about 4cm down the edge, this way the pump sucks less water between the blue and white bucket, this way there is more suction from above. I made some kind of straps out of ducktape to get more thickness out of the tape otherwise you need a lot of tape.
Step 3: adjust the pipe on the outlet so, that the white bucket is horizontal.
Step 4: adjust the white bucket down so there is more room for the blue bucket to float and turn around, this way the blue bucket or skimmer also stays more horizontal.
Step 5: If it's not working, i used about 8 parts of sticky lead devided into 2 parts of 4 pieces on each side, 5 grams each. You can get these at your local tyre shop.
And youre done!!!! Id love to have some comments, thankyou!
Greetings from The Netherlands!
มุมมอง: 55 881
วีดีโอ
Clubavond Veendammer Luchtvaartclub VLC / Knol
มุมมอง 2177 ปีที่แล้ว
14 juni 2017 Lodestar / Fokker E.1 / Knol / Evert Prins / Willie Scholte / Lockheed / RC
Battlefield 1 Funny
มุมมอง 387 ปีที่แล้ว
Toevalstreffer BATTLEFIELD 1 store.playstation.com/#!/nl-nl/tid=CUSA02387_00
Mijn bewerkte video
มุมมอง 238 ปีที่แล้ว
Ik heb deze video gemaakt met het videobewerkingsprogramma van TH-cam (th-cam.com/users/editor)
Mijn bewerkte video
มุมมอง 788 ปีที่แล้ว
Ik heb deze video gemaakt met het videobewerkingsprogramma van TH-cam (th-cam.com/users/editor)
20160504 144015
มุมมอง 688 ปีที่แล้ว
Diverse treinen op de Fat Farlake Railroad tijdens een rijdag 04-05-2016
20160504 143825
มุมมอง 168 ปีที่แล้ว
Diverse treinen op de Fat Farlake Railroad tijdens een rijdag 04-05-2016
20160504 143547
มุมมอง 418 ปีที่แล้ว
Diverse treinen op de Fat Farlake Railroad tijdens een rijdag 04-05-2016
20160504 141614
มุมมอง 288 ปีที่แล้ว
Diverse treinen op de Fat Farlake Railroad tijdens een rijdag 04-05-2016
20160504 141233
มุมมอง 418 ปีที่แล้ว
Diverse treinen op de Fat Farlake Railroad tijdens een rijdag 04-05-2016
I have improved the pump but i taped the bottom shut since those Valves where a pain and wouldnt stay closed since normally they should stay closed but they didnt want to do thanks for this video now it works much better
Even with a more powerful filter I still don't get enough suction so this is a great tip
Thank you so much for sharing!😊
Sweet! I’m gonna try that right now. Thanks
If you tape the bottom flaps, could you also drill out the center hole?
Probably
Just upgrade your pump and filter system with a sand filter, and you do not have to do any of this nonsense. The cartridge pump/filter you are using is complete junk.
lol bought a sand filter last week going back to today. Leaks under motor it was draining the pool and the pool is filled with sand, I am not a plumber or a mechanic when I buy something I want it to work. Put the little pump that came with the pool back and wow sparkling clean water again, now to get the skimmer to work,
6 jaar geleden :-/
I used your method. Works a lot better. I do need to add the tape around blue bucket. Thank you for sharing!
Thanks. The tape thing worked for me! I was driving myself crazy trying figure out why if my pump is 1000 gph and this requires min of 800, it would barely pull debris. But easy fix.
Lead poisoning for the fam. Nice 👍
We get more shit in our food then a bit of lead in a pool, its covered in tape so. Maybe different weights are better, its not mandatory.
Can you please explain the wrapping the bucket with lead part?
Because the standard pump delivered with the pool has very poor suction power. If you put some weight on the bucket, it will lay deeper in the water and get more and easier water pulled in.
Great Video. Good Idea.Thank You👍
I think you really need the sand filter
What do you mean by lead?
Thank you so much
Thank You very much! I have the same problem (same pump) Let me try this before I buy a stronger pump ;)
Not working, tried your method but nothing. I have an upgraded pump as well. Seems like my blue part flora to high above water.
It worked 😃 thanks
Apparently, this fix alone will not get your intex pool skimmer sucking water with lower capacity pump as I found out today. *On top of this fix, you also have to PLUG or stop the other OUTLETS if you have more than one. Only one outlet connected to the skimmer can be OPEN as was shown in this video.* I don't know why intex pool owners on TH-cam fail to MENTION this ONE CRITICAL FACT when it comes to intex skimmer.
This. After a year of frustration, I plugged the other outlet and that did the trick. Thanks!
The skimmer instructions do state to plug any other outlets
I have the 2 inlets and the skimmer came with a white nipple flow reduction for the second inlet. You just need two of the bases. That normally have the strainer caps. One gets removed for skimmer to screw onto the base the other gets the normal setup only the white plug is added inside the cap. Suction worked perfectly for me 1000gph krystal clear pump.
@@TheAsmrAddict888 Well, my comment is related to the stock pump that comes with the pool not bought separately. Stock pump usually has lower volume or pumping capacity somewhere between 250 to 500 Gallon... your 1000GPH is an exception and will have enough suction to do skimming and filtering your pool. The only way for me to solve this problem was to UPGRADE to a better pump like yours.
@@1USAUSA the skimmer says it has to be ran on a min of 1000gph. Or it won't work properly.
I finally realized the purpose of the bottom flaps. If the water level drops below the skimmer it will be sucking in all air. This is a safety for that. I did this trick too, I want all the suction I can get at skimmer
OH WOW... I always wondered why there was hardly ANY SUCTION with this skimmer... Now, I know... In fact, I threw it in my trash today while cleaning my basement, because I thought this was useless. lol.. Now, I need to take it back, wash it off and try what Reiner Hut did here. :)
I have the same problem. What moron throught it was a good idea to put those flaps on the bottom? They just make it worse. I'll try some duct tape tomorrow!
I didn't realize those flaps were on the bottom that let water in. I couldn't figure out why the bucket wouldn't empty when the top if it was above the water line. It took me 15min to finally figure out the flaps were there. Tape will definitely be put on the bottom to cover those up. Prob spent 2hrs trying to get the skimmer to work after it had been in the pool for a number of days. Initially worked well then stopped. Maybe because my filter was new?
I just put duct tape on the bottom without anything else and that alone improved the suction 10x. I can actually see the swirl at the top.
I think to stop large objects from getting in and clogging it?
Does this help with air bubbles? My skimmer has been making air bubbles and not having enough suction
Same thing for me. Any solution?
Did you leave the white ring out?
I'm gonna try that tomorrow, thanks for the video
Best solution : Sand pump filter with more pressure. Cheap solution, what you showed. Nice vid, thanks dude!
Apparently the power of Intex pumps varies, I have the same pump and never had any issues. As for the skimmer, I did other modifications. Video is on TH-cam. ps. I don't like the idea of lead in a swimming pool.