วีดีโอ

Thank you and thank you for watching!

Thanks for asking and for watching. You probably heard me say I made it, but I just used a wood puzzle piece box and then used wood glue to put cut-down paint sticks as dividers. Then I added the decals. Links to those in the video description :) Thanks again for watching!

@@NicholasKing-d9i I’m so glad! Thanks for the kind comment and happy holidays!

@@brodyharrison6029 thanks so much for watching! Links to what you need to buy to replace in the description. Good luck. You can do it!

Totally fair! Appreciate the comment!

Thanks so much for watching and for commenting with your memories!

Thanks for watching! I linked them in the description but you can find them here: Magnetic locks: amzn.to/47052C9

I thought I had seen them just lift out, I’m sorry. I’d also try pressing down first and then lifting if you haven’t tried that already. You may need to try a different video 😢

@@myfrugalmommylife thanks for the reply! I ended up figuring it out after some time. The snoo I have is an older model, so I had to go one more layer below and unscrew the casing around the bearings from the bottom in order to pull the bearing out.

@@Monicallme86 awesome! Glad you figured it out and thanks for sharing here!

Thanks for watching! Not sure if you made it to the end but at the time I did this they were sold out at IKEA.

Yes, Dreft and rubbing with a cloth and water got mine out

I’ve seen people use a Bissel spot bot for more serious stains

@@janelletaha7691 I’m so glad!!!

Hi! Thanks for watching. I’m sorry I don’t know the exact weight limit but a small adult can go down it…

Hi! Look at this new video of mine at minute 15 th-cam.com/video/JCZq2rRBPC0/w-d-xo.htmlsi=MCbh8dSzyNjplS8L let me know if it helps?

Thanks for watching. Sadly clearly any pacer sand we had or any barrier wasn’t preventing growth. Adding new sand sounds like a good option but this really needed a fresh start. We also now use a salt and water combo on weeds that spring up.

Either in your green waste or trash. Just use a broom and dustpan to pick it up. Best of luck!

Hi! You can try sliding a gift card under there. Basically you just want to loosen the glue. There are some dowels that attach the stove pieces to the top, but once you loosen the glue you should be good. You can also try a flatheads screwdriver if you need more leverage. Just try not to gauge the top. Good luck!

Hi! Sorry you’re having difficulty! I’ve done this several times now and never had an issue getting the screws back in. I know it’s a common issue however. Best advice I can give is to alternate sides tightening a little each side.

In case it’s helpful for others looking for a solution, my husband ended up flipping the SNOO upside down, and he was able to get the two middle screws in fairly quickly from the bottom of the SNOO. After that, we flipped it back up to screw in the rest four.

@@beiouyingchuanamazing advice. Thanks for sharing

Thanks for watching!

Just water :) good luck!

Hi! Thanks for watching. Mine came with three nozzles. This is the cone shaped one.

Thanks so much!

Thank you so much!

Hi! Thanks for watching and for your kind comment. As you probably suspect, how often you need to change the water depends on how your child uses the kitchen. If they run the water a long time when washing hands or wash several times a day you probably need to change daily. Otherwise you may have longer between changes. Remember though you can change the dirty water when the clean runs out. Your below sink containers should be roughly the same size. I hope that helps!

Sure! You need to actually loosen or take off one of the sides of the top to slip the rod out. Here’s the instructions for the kitchen so you can see what you need to loosen. Check out step 15/16 www.ikea.com/il/he/assembly_instructions/duktig-play-kitchen-birch__AA-1799826-13-2.pdf

Thank you so much! Good luck with your redo!

Thank you so much!!!

Awesome! I’m so glad. Best of luck and if you want any of the exact items I used you can find them in the description. Hope your daughter loves your hard work!

You can definitely get this done quickly, particularly if you dry the mesh with a hairdryer on cool. I would just gather everything you might need in advance - vacuum, cleaning solution, towels, plastic gift or credit card, sweater shaver, etc - and then get to work when your window starts. I’d also suggest watching the other cleaning videos I linked in the description so you’re prepared for difficult levels of yuck and have multiple strategies for handling any problems that arise :) Good luck!

Thanks so much for the kind comment! I’m not able to measure for you right now but you can probably find this information online. Also if you check out the contact paper I recommend then you know that width will work. Good luck!

I’m so glad! Enjoy your clean Snoo!

You can use a bunch of different things…velcro like the sink or even something like Quake Hold or command strips. Good luck!

I’d wait 24-48 hours just to be safe

Sure. Make sure you’re pressing down the side closest to the mesh first - sort of the reverse of when you pried them up. Pop them down back side first. Hope that helps! Thanks for watching

@@myfrugalmommylife putting back those stupid clips took me like an hour!

Thanks for watching. No, given how far I wanted to disassemble you can’t take the mesh off entirely at that stage

It take like 2 hours and it's very intricate if you want to wash the mesh, unfortunately. Poor design by snoo, I have pee on my mesh and cash get it cleaned

Thanks so much for the kind comment!

You can certainly do that easily! Good luck and thank you for the kind comment.

Thank you so much!

Still looks like the day I painted it. No issues with books sticking

Sorry, no, they were in the Bullseye section when I purchased them.

@@myfrugalmommylife thank you ❤️

It held up great. No rips or tears