วีดีโอ

Standard blipper 👍

Yep full race bike with a lot of work gone into it 👍

They’re for controlling stuff like traction control, wheelie control etc

What's ur name

This is a Aprilia RS 660.

he changed the handle bar cause the stock one is too high for using it on track

it's an aftermarket upper crown which allows to install clip-ons lower than the original integrated part.

he's accelerating and almost losing grip. maybe a combnation of bad tyres bad suspension ( too hard ) or just accelerating in the wrong gear or too early.

He's moving mid corner and not being smooth so the bike gets unsettled.

thisbike weight 190 kg os it generate at 6 k rpm 50-53 hp at the crank like you see on speedo at 6 k it show 40 km/h quick calculation for force at co tact path 45 hp at the whell lets assuming at 6 k rpm so around 33600 watt : around 11 m/s = 3050 newtons force arpund so around 310 kg force push this bike at this rpm at this velocity forward 👊🏻 for achieve 1G force of acceleration from this force level assuming bike weight itself 190 kg driver must weight 120 kg assuming he is under this weight tire can let say stand 1,25 G but let say weight distribution in this bike determined wheelly above 1 G when driver is in normal postion in seat than he use good rpm 😁👌🏻 if he is under 120 kg even with big suplly from force which determined acceleration at given weight the point is he do 5 sec + 0-100 tacho 105 = real 100 km/h what is waaaay to slow for this bike cos it have 100 hp 🫣 so or this dude is super heavy than we can say he really use to low rpm assuming weoght distribution dont allow to achieve more than 1 G assuming not super pro tehcnique of body position so more at drivewehll but i quees he just have some issue with engine or in some much weaker mode than max power cos 2,5-2,6 sec from real 50 to 100 km/h with me body weight 90 kg on this bike be enough 60 to 65 hp at the crank 🤭 . or very low pressure cos of hightabove sealevel or something …

no one cares.

@@TheHiszpanTVif no one cares then why do you care to go the extra mile to say no one cares at the comment

5 sec + to reall 100 tacho 105 on rs660 if you dont weight half a ton isint solid its rubbish 😂 beside 2,5 sec 53-105 is to slow for this bike or he is really heavo or this bike is in some of mode which decrease power to like 60-65 hp os 🤭🤷🏻‍♂️

Not trofeo, built to race spec by myself

slipper clutch should mean "dump" to me. since it will always mitigate the maximum torque the bike can handle. he doesn't look like he s doing much work.

yeah, he s rupting befor he starts moving so there is no reason a normal person with very little mechanics knowledge would ever simultaneously rupt the engine AND feather the clutch. that would make no sense unless you really want to replace that clutch during guarantee duration ( wich is certainly not a good idea for a track bike). Hopefully he answers you but i m pretty sure you guessed just as i did.

Still no response? damn to such a simple question

Erstmal aufm Track fahren wenn die n Service braucht 😂😂

AWC and ATC both fully off

3,6 - 3,9 sec in many tests

@@mario_ricco did u try 0-200¿ Btw it looks gorgeous

@@victoryart19 around 13,5 sec

normally it would go something like 240 kmh this looks like a different gearing ratio

No engine mods, just an air filter & exhaust system

@@davincasey1269 what exhaust do you have?

@@goncalopalma4465 same question

Sure ibb.co/541DFDP

@@davincasey1269 thanks! Any particular mount I need to look for?

This is the one I bought but I’m sure there’s loads of similar ones out there www.ebay.ie/itm/164439564862

SC Project full system!

Triple clamp from Robem Engineering, bars from SES Race Products 👍

@@davincasey1269 link product? Semimanillar

Hey, no just used the GPS built into the GoPro.

Thanks, she was going well!