Thank you my good man. We touch tool #2 as is our master tool and the rest of the tools follow. We touch the other tools if we change the fixtures or different type of jobs. We touch, z face measure, -.0315, enter.
Once you've successfully set up both tools and work off set. Loaded the program into the machine. Where do you go from there to start running? Go back to MEM mode, hit progam and cycle start?
Great video..I saw you dont publique new videos long time ago,I dont understand why. my english is realy poor but I really thank your way to explain every single move of this process. thank you for your time. hope you piblique one to know how to make a program on this kind of lathes.
Where did you get the bright screen ? I have a OSP700M (CadetMate) and the screen is hard to read, especially if there's alot of lights around in the shop. Is it easy to swap and costly ? Best regards
What if the part you are machining is bigger and you dont have big enough micrometer to measure diameter? Is there any other way to measure offsets on bigger parts? Thanks
To set your offset on X axis you can use any diameter you want, just find something close to the mic you're using to measure.Once you've done you X you don't have to do it for every part your turning.
i worked on this machine with live tooling for almost a year, it was a terrible experience - this whole "g-coding" in 21st century is obsolete, eligable just for large series where one person writes the code and another runs the machine, any small changes to complex contours or tool movements may take dozens of minutes, also you can't properly see what the machine is going to do, just hit the green button and pray everything's been written correctly :) work overtimes, do small changes to program "half an hour before the shift ends", forget to add "G0 G28 U0" before tool change and you end up with turret turning into your rotating workpiece - most of CNC crashes are caused by low experienced and inattentive staff fiddling with the code now i work with old mazak QTN with mazatrol system and that's completly different stuff - you just write operations what the machine will do and system generates G-codes for itself, also you can open "simulation" and see what exactly the tool is going to do - while G-coding takes hours, in mazatrol you can write whole program in few minutes and changes in the program takes dozens of seconds, it's really idiot-proof, eligable for few-piece production i often change work on my lathe 2-3 times per shift, two pieces of stainless flanges, then some aluminum wheels, i use different ID roughing tools, so I don't have to stop the program to change cutting conditions - i just press buttons to change spinle speed to 80%, feed to 110% and instantly save it in the program for the next part... and then change program for new revision of steel shafts where i change roughing contour within few seconds, delete whole finishing process, copy roughing process instead of finishing and delete roughing tool and add finishing tool for the proces - less than minute change, no fucking around with some stupid G-codes, I can view simulation of the program and machine is ready to run first part within few minutes - if i had to do it in this crappy fanuc system, only thing i'd be changing is my job
So after the first tool has been touched off from the 123 block and part , do the rest of the tools needed also get touched off from the part? Or just the 123 block?
More videos please..
Hi. Do you know how to convert Japanese to English?
You should of called up the tool when you probed
Nope, once u go dmg there is no going back..
I can not retract the tail stock quill, I’ve tried all m codes no response.
Hi
Hello sir.Can you please help me on how setup on SL603
Sir zoom nothing is seen which key are u using to operate
👍
good explanation
This could be done in 30 seconds with a touch setter
What year is this Doosan Lynx 220?
May i ask cost of machine like that, want have some idea. Thanks.
Hallo bro . Please review GSK
That was a nicely done demo.
432 is a roughing insert 431 is a finishing insert
Excellent video! I just purchased a used Fanuc controlled lathe and this video has been very helpful in getting up to speed with setup and operation.
All you have to do is explain that all tools are timed off the main tool. Timed meaning coming from that tool. But great work as well.
Thank you my good man. We touch tool #2 as is our master tool and the rest of the tools follow. We touch the other tools if we change the fixtures or different type of jobs. We touch, z face measure, -.0315, enter.
What about the workshift settings?
How can I bind the "C" axis?
Как можно привязать ось "С" ?
Thats realy great thanks alot
Helpful video!
Parsan 12552
Parsan 12552
"orientate"...
no voice please increase the volume thanks
Once you've successfully set up both tools and work off set. Loaded the program into the machine. Where do you go from there to start running? Go back to MEM mode, hit progam and cycle start?
I hate fanuc😢
Как подключить покажи
buenas tardes cual es el codigo para descativar la alarma de la puerta gracias
en la caja que trae tiene los codigos pegados,donde estoy trabajando aurita es solo haas que tenemos y ganesh
Check coolan and air levels before!
Great video..I saw you dont publique new videos long time ago,I dont understand why. my english is realy poor but I really thank your way to explain every single move of this process. thank you for your time. hope you piblique one to know how to make a program on this kind of lathes.
I añmps forgot all about cnC lathes,, besides ,I'm making more money on construction.
Thank you for sharing your experience. Please tell me if Okuma has a graphical simulation mode? And if so, how to use it.
Спасибо что делишься опытом. Скажи пожалуйста есть ли на Okuma режим графическая симуляция? И если да то как им пользоваться.
Привет как подключить знайте это станок
Hocam merhaba ben Türkiye den yazıyorum 🎉
thanks a lot!
Where did you get the bright screen ? I have a OSP700M (CadetMate) and the screen is hard to read, especially if there's alot of lights around in the shop. Is it easy to swap and costly ? Best regards
Ran one of these and a mill back in 2015 for a oil tool company. The Okuma mill was a lot of fun.
Hai Sir, pls any video available how to take Okuma tool offset & programming examble pls.
Where is your country sir??
What if the part you are machining is bigger and you dont have big enough micrometer to measure diameter? Is there any other way to measure offsets on bigger parts? Thanks
To set your offset on X axis you can use any diameter you want, just find something close to the mic you're using to measure.Once you've done you X you don't have to do it for every part your turning.
if you had an entire series like this about this controller id buy it
Thank you ...
great videos! Thanks for making and posting them.
i worked on this machine with live tooling for almost a year, it was a terrible experience - this whole "g-coding" in 21st century is obsolete, eligable just for large series where one person writes the code and another runs the machine, any small changes to complex contours or tool movements may take dozens of minutes, also you can't properly see what the machine is going to do, just hit the green button and pray everything's been written correctly :) work overtimes, do small changes to program "half an hour before the shift ends", forget to add "G0 G28 U0" before tool change and you end up with turret turning into your rotating workpiece - most of CNC crashes are caused by low experienced and inattentive staff fiddling with the code now i work with old mazak QTN with mazatrol system and that's completly different stuff - you just write operations what the machine will do and system generates G-codes for itself, also you can open "simulation" and see what exactly the tool is going to do - while G-coding takes hours, in mazatrol you can write whole program in few minutes and changes in the program takes dozens of seconds, it's really idiot-proof, eligable for few-piece production i often change work on my lathe 2-3 times per shift, two pieces of stainless flanges, then some aluminum wheels, i use different ID roughing tools, so I don't have to stop the program to change cutting conditions - i just press buttons to change spinle speed to 80%, feed to 110% and instantly save it in the program for the next part... and then change program for new revision of steel shafts where i change roughing contour within few seconds, delete whole finishing process, copy roughing process instead of finishing and delete roughing tool and add finishing tool for the proces - less than minute change, no fucking around with some stupid G-codes, I can view simulation of the program and machine is ready to run first part within few minutes - if i had to do it in this crappy fanuc system, only thing i'd be changing is my job
May i know how to use graphic simulator?
So after the first tool has been touched off from the 123 block and part , do the rest of the tools needed also get touched off from the part? Or just the 123 block?