วีดีโอ

i have similar board but it rarely posts and mostly it doesn't post

You made me realize 90 degree USB-C adapters are a solution to my problems

God bless you and merry Christmas.

H, i know this question comes really late. May i know what is the output colorspace? The reason I ask this is because Atem Mini HDMI Output uses the YUV colorspace. While some projectors/monitors only accepts RGB colorspace. So wondering if this little device converts the YUV to RGB. Thanks in advance.

I flipped my screws so I could mount it with the hdmi facing down. Works great on my ZVE10 and a6300

I there I got the same setup build X79 8x4gb 32gb ram CPU e52650v2 GPU mllse rx580 2458 sp 8gb (from aliexpress) In your opinion do you think that I can play decently games like resident evil 5 remake and the last of us remake? Please answer

play some games with that build t see the results

Lauretta Centers

hey, what is the thing below your patchbay, where there are 4 2.5" disk slots? trying to find a nice solutions to hook up disks to the pis, preferable from the back somehow without using the "front" usb slots.

how to updated to the latest pi companion with olderversion already installed

Apple Studio or nothing.

Hello I want to know if that board can run windows 11

Love it

@ 6:30 just know that inserting the thin cable from the sd adapter board into the POE hat is really easy. It's not explained anywhere, but before you try to insert it into the POE hat slot, there is a gray clip in the front of the slot that has to be pulled out. Push the cable in and then pop the gray clip back in to secure to thin cable. I had to learn this the hard way.

It would be better if they were fully enclosed for dusty environments that's including covers for the front for when you don't use the HDMI board or you don't fill the entire rack up with PIs

It’s compatible for the Sony a6600?

Pc partpicker don't have this motherboard listed. Can someone tell me how to calculate the wattage of the smps that will be necessary to run this motherboard?

Most Chinese X79, X99 motherboards are not m-ATX (24x24 cm), they are more close to mini-DTX (23x17 cm), e.G. Huananzhi x79 6M is (23,5x18,5 cm).

hello, first, great work here, thnaks 4 that; question, i have same motherboard and CPu, but never goes more than 2.6 ghz, so tb donty works for me, can u tell me whye; again thanks a lot

Thank you!

its possible to fit a ATX psu in this config?

please x79-vg3 motherbard bios dump?

Do you still run this setup? If so, how does it perform these days?

wow some people are dumb the x79 chips are brand news meaning NEVER USED now as for the cpiu its used and repurposed man you must have some dumb subs if they believe a word you say lol so dumb

Hi Ben i like to see your Watch, whats the model and the link to where you by it....?????? thanks

Thank you good sir

I am getting error 79. What could be possiblity.

Thank you.

Hi after flashing and put the sd card in the raspberry it will say after a while: which user would you like to rename? can you help me with this?

Could a e5-2695 v2(115W) or e5-2697(130W) work with this pico power supply? Since the video is 3 year old has anyone else watching this video lately bought it and is it the same?

I can feel the exhaustion in his after seeing the white blue bios interface!😅😅

I love Smallrig as a company and generally have much love for their products, but these adapters are garbage. I have replaced these before and cannot trust them. Every single one that I have purchased has deteriorated within 6 months of use. I only use my cameras in a temperature controlled studio. Without fail, the PVC jacketing comes apart, exposing the shield and conductors. I had one camera lose video output and I'm convinced it was because of the severe deterioration of the cable. Smallrig has good support and has sent me replacements, but at this point I'm looking for another cable clamp solution for cameras that have micro HDMI.

Beautiful product and great production quality. Keep it coming

Does the Yubikey 5Ci have to be plugged directly into the computer or will it work with a USB hub/splitter ?

Here I am in 2023 December and just picked up an x79 pro with e5 2650 and am about to build my first budget build in almost 20 years! No more console! Let's goooo

Love the father \ son connection! So sweet and special.

Great work. I now understand how to use the Stream Deck with a Pi but what about the Stream Deck software itself? I'd also like to use buttons that come directly from the Stream Deck software at the same time (using various Stream Deck plugins). The problem is we have a MacBook Air with just 2 USB C ports with a docking hub and Companion loses the connection to the Stream Deck. After working for a few minutes, we get the red flags on each button and no apparent way to reconnect it. Is there a way to set up Companion on the Pi and still use the Stream Deck software simultaneously?

Looks like it is RPi5 compatible and most likely with room for an M2 HAT - just needs power buttons.

What F keys are you using for bios and boot menus?

Thanks for this review . Planning on getting one of these

How do you get the display to work?

Will it fit if I use the MSI Pro B760M A WiFi motherboard with dimensions of 243.84mm x 243.84mm?

Is the power supply fan facing inward or toward the front panel?

i think the only thing i don't like about that item, is that they didn't design it to be modular. what i mean is, each time you want to add or remove a pi, the WHOLE shelf needs to be removed. uctronics does have another version, though with a few less features, where each pi is on its own insert, and thus each pi can be removed on its own. beyond that, that looks really cool. I love your desktop rack. though personally i have a 42u rack. To each his own there for each situation ;) i do wish these things were cheaper, as i REALLY want to get a Pi 4B, but i have other priorities that i need to spend money on :(

I wonder if using just one screw and mounting it on a small angle make this useful on my sony a6600..

Just the video I was looking for.

So I just saw your video and this is very helpful. Question though: Now that I have the Companion image on the Raspberry Pi, if I take that Pi to another network, basically the same setup, will all my setting still hold even though I am not on the same network?

Does anyone know what size motherboard I used? He said it was micro ATX but a smaller version.

is there any other option that not using chino brand..?

ive just builid this same setup thanks for the vrm thermal headups tip. Have you manage to make it run with quad channel memory configuration. I have installed 4 sticks of ddr3 1600 but it does not work as quad channel. Any input would be appreciated. thanks