- 17
- 359 358
Jon Hofstetter
เข้าร่วมเมื่อ 14 ธ.ค. 2012
Kuhn Axis 40.2 Precision Application
Trimble XCN-1050 with Kuhn Axis 40.2 ISO Bus Fertilizer Spreader. The 40.2 has rate control in pounds per acre and automatic section control with 16 sections. Our guidance with is 92 ft which is based on product being spread.
มุมมอง: 1 281
วีดีโอ
Basics of the Trimble FM 750 System Part II
มุมมอง 23K11 ปีที่แล้ว
Basics of the Trimble FM 750 System Part II
Basics of the Trimble FM 750 System Part I
มุมมอง 54K11 ปีที่แล้ว
Basics of the Trimble FM 750 System Part I
Trimble FM 750 Headland Field Pattern
มุมมอง 105K11 ปีที่แล้ว
Update: FM 750 can do headlands last with 5.0 firmware update. Must set headland setting to Manual. So then you manually switch between your infill or headland patterns.
Part II Boundary, water way, second AB line
มุมมอง 7K11 ปีที่แล้ว
Part II Boundary, water way, second AB line
Boundary, Waterway, and Second AB Line Part I
มุมมอง 13K11 ปีที่แล้ว
Boundary, Waterway, and Second AB Line Part I
How do I measure how many ha are in a traingle or random shape?
Is there a way to delete an AB within a field or rename an existing field?
In the display the easiest way is to delete the field and this will delete the guidance lines in that deleted field and then you can start a new field with new guidance lines. Another option would be to use software program like AFS Connect or PLM Connect which is free to upload all your data too and delete guidance lines and be able to edit your field names. Then export data out of program and reload back into display after deleting all the old Grower, Farm, Field data out.
Clear message, clear structure, easy to understand, thank you
Quando some os ícones de acesso da tela principal oque pode ser como colocar eles de volta na tela e também como tirar o tm 200 fica dando erro
Could you resend your question with a little more information. Not quite following what you are asking through translation.
Please continue the video making!! 🙏🙏🥺
Is there an option to go back down the same line in the opposite direction for when using a wick boom or weed wiper as rushers need wiping in both directions?
That is one disadvantage with freeform. Using a curve or straight lines you can reload line in field as use for other passes.
Can anyone help me make a line for a headland that is not straight. I have headlands the weave in and out around telephone poles and curved in different ways. How do make it follow does the headland swath allow me to record a not straight line? When I use free form it always loses my line whenever I stop… please help.
Try select curve line or use headland pattern. Naming your guidance lines can also help.
My 1000 doesn't have a nudge icon
May need to input a nudge amount in settings, I think is where located.
The Identical curve maintains guidance line parallel to your original curved line. Think of it like an AB line only your following a curve. An adaptive curve will adapt to where you drove previously. If you are following a curve and you drive to avoid an obstacle it will remem er that an adjust subsequent lines there after. Hope this helps.
Hey John. Thanks for the video. Just got This and using your videos to learn how to use the equipment. I like this option but I’m curious, if I wanted to plant soybeans in a diagonal direction using headland option, would that work to adjust the inside lines? Or say it’s a square field just to stay simple, could I select the A point in one corner of the field, continue around the headland, but once I got to say a diagonal corner approximately 45 degrees, could I then set my B point and have that diagonal line?
Yes you can set your A and B point wherever you need to which if done like you said would give you a line in a angle. You also have the option to select A+ for infill this allows you to input a degree heading and may be more exact in getting the angle you want.
Oh, thank you! I'm new to the system and I thought it would literally make the lines identical and at some point they wouldn't match the field curve. So I just assumed I had to use Adaptive curve or Freeform. Now I would for sure love to try it with the spreader. But then what exactly is the difference between Adaptive and Identical curve?
Did you plug the Usb directly in to the Display or into the Hub?
Into Display for video. If you have hub you can try it as long as display reads usb drive it should work.
i want more than one a-b line. how do i do that?
Go to field, select no to have you finished field. Select add ab line. Then go through rest of screens back to field.
Look at video for boundary waterway and 2nd ab line
Hi Jon, does it make any difference to the recorded area if you expand boundary half swath width or record on for example boom right ( assuming anticlockwise travel) I am guessing that either will mark the outer edge of working width and therefore the field boundary? , thanks, Rob .
If set on expand half swath width when recording a boundary it does put it at outer edge of implement no matter which direction you travel. That is were I set it to record a boundary. Now if you have a boundary recorded then expand half a swath width I would have to double check that to see if it increase field acres compared to what was originally recorded.
@@jonhofstetter4120 thank you for getting back to me Jon
One more technical question. First i set up field boundary. Then i set up AB line on boundary. Will inline be dependant on machine width? So does The navigaton create different lines for seeder 3m and different one for sprayer 24m?
Yes lines in field are based on implement width. If you come back to field and load your original line your spacing adjusts to you different implement widths.
@@jonhofstetter4120 so, I can go to create boundaries with 3m fertilizer and go direcly on border and in same drive set up AB line?
Yes, just keep in mind your gps repeatable accuracy. May have to adjust lines on lower level accuracy.
Hi @Jon is it possible to straighten the line in few tracks? other question is - how to go every third track?
In the headland pattern when you switch infill it is a straight line. Generally speaking you can start in a freeform pattern and transition to a straighter line this is a last pass pattern. I hope I understood your question if not let me know. To do every third pass you can count your lines on screen they are numbered. If you have a 20 ft wide implement and then go back over field with a 60 ft wide implement load the same field name and guidance lines you used with your 20 ft implement then your line degree heading matches right up. Your GPS accuracy plays a role and rtk signal with 1 inch accuracy works well. When doing this start a new event to have a clean screen to start with so you get a coverage map for that specific pass in field and most importly when controlling a rate and running automatic section control.
@@jonhofstetter4120 not exactly, my question was how to avoid reversing tractor. I have 10ft seeder and would like to go every 4th line of guidance. sorry my technical English is not as good as id like to be
Not sure may need more information on reversing tractor. Going every 4 guidance line you could count the lines or go by swath number accross bottom of screen. If you are centering on every fourth pass you could set up a 40 ft. wide guidance width. If you are matching up to original lines or a tram line you may have to shift your line to match up with previous passes in field. Sorry I misunderstood your original question. Hope this helps.
Very nice, thanks for sharing.
Password ?
2009
lol this is the most annoying part of the system
Once the headland has been made, will the auto steer drive the outer lap the next time the paddock is worked in?
Patrick Way yes it should. On some older firmware versions it may not.
Hey Jon. Thank you very much for the informative video. Makes it much easier to understand than reading the manual. Really appreciate it sir. Well done!
Thank you for watching and glad it helped you.
pro trick : you can watch movies on Flixzone. Been using them for watching all kinds of movies recently.
@Seth Braydon Yea, been watching on Flixzone} for since december myself :)
Will the A+ line follow the last pass you did? Got really odd shaped feild and would like to do a headland and then have the next pass always follow my last is that possible?
The A+ line is same as AB only you run your line before you start your first pass. Last pass is your freeform pattern.
How can i update my firmware?
Adrian Duta If you are on 3.0 firmware already no need to update. As long as everything is working good no need to update either. if you need it www.triangleag.com/250_page.shtml download from above website and put in root directory on a usb drive 4 GB is a large enough drive much larger and display may not read drive. power on display and insert drive should get yellow screen with firmware update. Stay on 3.0 dont go to 3.1.
you prolly dont care but if you are stoned like me atm you can watch all the latest movies on instaflixxer. Been watching with my brother lately =)
@Avery Pedro yup, I've been watching on instaflixxer for since december myself =)
Is there a way to automatically detect fields in the area, like FieldFinder on the EZ 500?
Up to this point in firmware not that I am aware of. I wish it had that feature it would really clean up a lot of data management issues that I deal with. I would like them to add it as well.
I am 100% HUSKER!!!!!
Nebraska, Good question not sure on this one.
Please show a 2 headland video, I don't get the switch to the second headland and i mess this up. one headland is as you showed but when does the next one show up?
mymy1926 If time allows this winter you are not the first one to ask this.
Ok sorry 138
Where are you? If you use WASP 130, WHAT do I use in Nebraska?
Have you covered yield monitor calibration on the FM1000?
***** Not yet. I have been going with the customers in the field to do this. Weighing four loads whether bin fills or truck loads and checking moisture and checking test weight seems to work really good. Taking full header widths with your average travel speed while harvesting is how we have been doing it. Using Side mount moisture sensor is key also at this point. If switching between crops make sure to save calibrations and it doesn't hurt to weight another load after switching.
Thanks for the tips. Just got one of these and the first times out weren't pretty but I see from this what might be the answer to some of the problems. My biggest unsolved issue is selecting what type of pattern to use on my very irregular sized fields. This tutorial takes me a few steps farther ahead and thanks for doing it.
Not sure if you guys gives a shit but if you guys are bored like me atm then you can watch pretty much all of the latest movies and series on instaflixxer. I've been binge watching with my brother for the last few weeks =)
@Dario Finley definitely, have been watching on instaflixxer for since november myself :)
Excellent series. Easily understandable by pro or novice. Well done!
I like too know in Michigan would I still lock the satellite signal to waas 138? Thanks
He never answered you?
andy p Yes in Michigan you would lock onto 138. We have choppers running up there and that is what they use. Sorry for taking so long trying to catch up on comments.
como calibrar para apricaçao de calcario e gesso
I would try running WAAS first and see if it is accurate enough for you. A good option right now is to do a Rangepoint RTX demo. It is a more broad accuracy and would be a good place to start. When it comes to row crops (corn) that is when I would recommend a higher accuracy of Centerpoint RTX or VRS/RTK. The basic thing to remember is the more accurate you are the more overlap you can eliminate. High accuracy pays for itself.
First save all of your client, farm, fields onto USB Stick if you want to reload some of them into display after deletion if not don't save any. Go to settings, data, manage data, internal, delete data, delete selected fields, cleint, choose all. Then hit green check, then green arrow. Then green check again. You should get hour class and fields should be deleted.
hello i farm over in the UK. i find your videos very imformative. i wondered if i could ask do you know how to delete fields. Ive tried everything ? do i need to go into clients or farms ? your help would be very appreciated ! Liam
I would be using it for seeding mainly. Maybe for swathing to.
Would be for seeding mainly....maybe for swathing to.
Good suggestion if I have time this winter I may be able to. It is something that you can do yourself. When you have a field opened go to guidance tab on right side of screen and then press either nudge right or nudge left. The more you nudge the line, meaning pressing the button multiple times, the more nudge you will get.
What exactly do you want to do? If you were to go with a more accurate GPS signal than WAAS, yes with some signals there is a annual subscription fee. It all depends on how accurate you need to be.
do you have to have a pay subscription with these?
great videos! Little more focus from the camera though would def help understanding what you're reading.