วีดีโอ

Sorry to hear that! If the thump on the ground fix doesn’t work, don’t lose hope. Ignik apparently called back old stock of gas growlers from some retailers. I’m betting a voluntary recall for customers is coming soon. Seems like the newer retail stock already has a fix implemented.

@@NewNewChris I just bought one at Bass Pro, any way to tell what model we have?

@Jaypher not sure unfortunately. We pulled all of ours off the sales floor yesterday. I bet if you reached out to Ignik they would have a way to tell you.

@@NewNewChris I bled mine last night via a griddle for 20 minutes and took it back to Tractor supply today. They tried filling it slowly, still wouldn’t take any gas. Then I banged it on the concrete to try to free the float with no luck trying to refill it again. Ignik also doesn’t want to respond to my email or Instagram tags 🤣.

@@NewNewChris Ignik finally emailed me back today and said it’s known issue they’re working to fix.

Heck yeah. Just snagged an unused kelty awning there for cheap because the bag ripped.

It’s become a non issue for me ever since I installed a 100 amp hour dual battery system in the truck. I can run whatever settings I want and never have to think about power.

It’s pretty friggin great man.

Thanks a lot I really appreciate it!

This was back when they weren’t totally sure what caused Covid to spread. We also had to wear gloves inside every property and weren’t allowed to touch light switches. Wild times.

Thanks for the feedback. I found some different settings which should make it work a lot better.

This is out near Crested Butte

Sorry to hear that. Did you try resetting with the thud method? Still haven’t had any issues with mine. I’d be surprised if there isn’t some kind of a recall soon.

Glad you enjoyed it!!!

Yeah they’re going to have to fix this asap since so many people have had issues. My guess is they put an opd safety device from a full size unit onto the smaller can without thinking of the issues it would cause. This is why I only buy from places with a satisfaction guarantee, no hoops to jump through with returns.

Sounds like the slow filling method and smacking it on the ground are hit or miss for effectiveness. I’ll make a follow up if I have any issues with mine but so far so good. My guess is ignik is going to hopefully do some kind of voluntary recall soon.

@NewNewChris I'm not mad at a free fix/ replacement lol. Is there going to be an announcement or do I need to register my tank?

@WheelsAndHelmets I’m not sure to be honest. Those of us on the retail side of the industry will get some kind of info at some point I’ve been told. No eta. I’ll for sure be doing an update whenever that happens though.

@NewNewChris no problem. I did a Google search and it looks like we can register products on the ignik website

@WheelsAndHelmets probably the best way to go then. I may do the same soon.

It’s for sure getting loved to death. Too many broken glass bottles and rusty nails from people burning pallet wood. Worth it for the views though.

They have a fix incoming soon. What will likely happen is they’ll do some kind of recall. That would be my guess based on how many issues they’re having with it.

It’s a great little spot!

It’s a real game changer!

Glad you enjoyed it!

Thanks dude!!! Get out there and camp. And if you ever find yourself in Colorado just hit Matt and myself up we’d be psyched to do an outing.

@@NewNewChris Hells yeah. And I’ll try to tell them to keep the smoke down here in WA btw, sorry it’s making its way over there. 😆

@geebes2112 🤣 it’s all good man we just had 4 wildfires in 1 week. At this point it’s unavoidable.

Definitely going to need a diesel heater this winter.

I’ll for sure bring the screen room this next time, but it has so many holes it almost doesn’t work anymore. I bet we can figure out some spam recipes!

Dooooooo itttttttttt. Even if you don’t have the sweet ass setup, dooooooo itttttttt.

I strive for high brow content around here.

Egg fart wine is a delicacy

Especially when paired with the right meats and cheeses.

Thank you!!!

Hahaha we can’t believe we got away with it.

I’m glad you liked it!!!

Sorry to hear about the evac! Sounds like some relaxing nature may help though.

Glad you enjoyed it!

These devices tend to draw different amounts of wattage as they run and it varies depending on settings so the easiest way is to plug the power chord into your ecoflow and run the device. As it runs, look at the battery display and pay attention to the watts being used. Take the highest wattage it shows and assume it will draw that many watts per hour. That’s a very rough estimate but it will get you by enough to do some power need calculations. The dc connector I use is proprietary to my brand and model, so you’ll have to do some research to find what dc plug will work with your Phillips cpap as I don’t own one so I don’t know specifics. For solar panel cables, that will also depend on what type of solar panel you have and what connectors it uses. Most use an mc4 connector. The instruction manual should list that. Once you find that out, get that type of connector on one side of the cable and on the other side make sure it has an xt60 or xt60i connector, as that’s what the Ecoflow brand uses. I’d recommend xt60i as it can push more power into your battery. Amazon has lots of cable options. Hope this helps!

I ran it at my full “at home” settings, so humidifier and heated tube on. I don’t remember exactly set at what but I believe my humidifier is currently set to 70 degrees.

So rusty but it’s good to be back at it. I hope you enjoyed the gas station cupcakes. 🤣

Thanks a third time!

Thank you

Thanks! 😎

Next video: how to use your cpap as a bear defense.

The best version of this was shot on manual focus and completely blurry. Forgot to put af back on after shooting astro the night before. 🤣

I hope you snagged the tripod and are enjoying it!

Hello i have question regarding CPAP I always worried about using CPAP if i want camping . I didn't find the good generator that i can sleep full night due to the battery. And today i searched on google and i got ecoflow pro but i don't know if it enough for two night or three my CPAP is Fhilips dream station and its watt 80. Please help 😢

@@N-305 If your CPAP draws 80W per hour, it'll use at least 560W in 7 hours of sleep. So for 3 days, it'll need at least 1.6kWh (560W x 3). The EcoFlow Delta Pro is rated at 3.6kWh, which should provide more than enough juice to run the CPAP for 6 days!

@@N-305if you turn off your heater and humidifier settings you will be able to run the CPAP for much much longer. Just a word of caution, it’ll make your mouth/throat really dry and your throat can literally stick to itself almost defeating the purpose of using the cpap machine, but it can get your through a couple of nights in a pinch.

To add to this, if you camp in a warm climate where it doesn’t get too cold at night, leaving the humidifier on but turning off the heated tube saves a ton of power as well. Caution though, if it gets very cold at night and the tube is off, water droplets will form in the tube and blast them in your face. Not particularly fun.

If there is a dc power supply for that device, that will help a lot with power draw, as inverting dc to ac loses some efficiency. You may be able to get away with a smaller battery. The rest of the comments on here also have very sound advice. Good luck!

Hey! It’s holding up great but honestly I never use the thing anymore since 95% of the time I’m on a tripod. I really prefer the peak design strap as my go to since it’s so adjustable and comfortable.

Hey thanks a lot!!

Oh it’s the worst haha.

Haha thanks man. And I thought I was slacking with this one. 🤣

Great times man! We gotta get out there soon. I want to upgrade to 35” soon.

Bro I could taste it. 🤣

It’s a fact. 😎