วีดีโอ

Hi Marco, you can use the original plastic one. I had to just a little file to sharpen it up a bit from all four sides and then, with the light pressure it will slide in. Give a try, it will work out

@@NorthSeaRC-ff9ynohh that’s good to hear! I’ll give it another shot tomorrow. Thanks a lot!

Hope all to work out. The maker of this service had a proper metal mount also, as I remember

As far as I remember - it is not

@@NorthSeaRC-ff9yn thx. brother

The name is BDXrc. They are initially designed for SCX24, so I had to drill the ball joints a bit. Size wise they fit well. Performance wise, I would probably choose Injora better

@@NorthSeaRC-ff9ynthanks for the info, I’ll have a look at the injoras. 👍

Appreciate and happy that you like it

Thank you, Carlos

Appreciate for your comment, Carlos. Yes, you are right. I was bit lazy here :)

Thank you

Please apology for the late reply. Works fine, no issues. I‘m quite happy with it, but I cannot compare it to Injora similar one since both builds I have are with 9imod

Appreciate for your comment!

Thank you for the comment. In regards of the mirrors, my one came already with one Brocken out of the box(the right one). And the left one Brocken soon too, during crawling. They are seems to weak for crawling, but nice scale element for people who use this models as stand or trail rigs

@@NorthSeaRC-ff9yn Indeed, I think they should have made them from hard rubber or something and then put some chrome on. Too bad! Especially when your son wants it glued every time. :))

Thank you, Alex. My one was already underway, when they released updated version. To be honest, I do not have problems with 50% reverse power. It even convenient. But I knew, many people demanded 100% reverse possibility. So the upgraded version with 80% is probably really great

@@NorthSeaRC-ff9yn have you ran it on 3s yet it like brushless and I probably will get the upgraded one thanks

@@Rc_Alex_76no, I do not have 3s battery. May be it worth more with 370 motor. For the standard 180, 2s seems to be fully sufficient.

@@Danylo.M yep 2s is fine for what I do I've only tried 3s 2 time's and it was different the slow crawl was better much more torque I'm using the injora purple motor thanks man happy RCing

Appreciate, Alex. Now I’m really interested also to try same. I do have purple motor with F150 high trail. Honestly, cannot feel any difference with this way cheaper 53 T motor from Ali…

Thank you for the hint. I was waiting for some parts at that stage, and then switched all to ball bearings a bit later. Yes, it really change a lot

Appreciate and I also finding your channel great!

Thank you for asking. Yes, it comes with bushings. I think Asiatees or FairRC are offering bearings for the Evo

Thank you!. Finally, the Spring arrived. So I decided not to overlay the birds singing ;)

Thank you @1500chessie Almost all of the parts you listed are ordered and I’m waiting for them now

It is Injora beadlock wheels and S5 compound 63mm Swamp Stomper tires from Injora too

Thank you 👍

Thank you

Thank you for the comment. To be honest I not got the question 😊 Do you mean, compare to Defender and Bronco body? If so, I did not experienced yet ordinary, non High Trail version. For sure, center of gravity is higher, so some mods definitely needed to make it really crawling capable. But still, surprisingly good even stock

@@NorthSeaRC-ff9yn thank you. Sorry im from Germany. This helps me.

@@Frumsl84 Danke für Ihre Antwort :)

Thank you very much for your comment : ) Glad to read

Thank you, for the comment. The video speed is normal(1:1) ratio. I decided not to slow it down in order to see to which extend body bounce reduced with new shocks. I also still use original motor/drivetrain. This is also stock V3 version of ESC/Controller(silent one), and it really performs close to K5 Blazer ESC

Hi, Petr. Yes, you are right. Those shocks are primary for SCX24 and I had to drill a bit the holes to make them more wide. Then, I used original ball bolt for the lower link and used it to connect upper part of the shock. In the same time, lower part of the shock was connected bystandard upper normal bolt. The reason to do so, is that supplied bolts are smaller in diameter as they are for SCX24 as you mentioned. In regards of the wheels, yes, there shall be offset adjustable. The full name of the wheel is: INJORA 1.0 RC Beadlock Rim Deep Disc Negative Offset 3.15mm Wheel for SCX24 Gladiator Bronco C10 JLU Deadbolt Axial 1/24 Track W1005 Hope this will be of help

Thank you very much!

Danke für deinen Kommentar. Ich würde mir immer noch wünschen, etwas mehr Gewicht in den vorderen unteren Teil zu bringen, aber das allgemeine Gewicht hält mich davon ab. Wenn das Auto herunterfällt, befürchte ich, dass die Karosserie durch all die zusätzlichen Gewichte, die jetzt angebracht werden, leicht brechen könnte. Und es ist immer noch ein serienmäßiges Lenkservo ...

Thank you. Shocks are "BDX RC 1/24" from Ali... The tires are Injora 56x22mm