วีดีโอ

What the mechanics have done to me is break the capping that goes over the lug nut. I hate that they make two piece lug nuts. When they break off the capping this now changes the size of the lug nut and the lug wrench that comes with the car will now be to big for the lug nut. So, if I were to get a flat my lug nut would not be able to remove the lugs with the broken capping. I just got tires at Pep Boys and they broke the capping off of 4 of my lug nuts. So, now I have ordered 20 new lugs nuts that are one piece, they have no capping. This is the second vehicle that I've had to replace the two piece lug nut with 20 new one piece lug nuts. Have you seen the two piece lug nuts I'm talking about?

Thanks for the video! I found those clips for the connection on the fuel injectors can be left on & just lay the bundle aside to avoid having to disconnect & possibly breaking the clips. Thanks again for a great tutorial!

You are the man. It stopped working a few days ago and now it works again thanks to your tip. It's a must have on a car, makes driving a lot more enjoyable. 👍👍

Anyone experience the differential grinding/vibrating after the oil change? It wasn’t before and now it is

Thank you so much for making sure I didn’t embarrass the hell out of myself at the dealership 😂

Thanks. Brief and direct to the point. Keep it up!

Good instructions.

Very informative!

4:52p Is there a bulb in the glove box of 2016 Accord EXL?

Great ❤

What size filter socket you running?

Great job. Appreciate you. Just subscribed too

Really smart idea bro

thanks

Where can I buy this same bumper? Anybody know? I need a new one

Why on earth would you make a video without the part numbers

I have a 2022 Pilot and this helped me get my EGR/VVT to set ready. Thank you so much. For anyone looking at comments with the same not ready/complete issue get on the freeway and get up to 45-55 shifting your own gears on 5-6K RPM. Hold it for 15-20 seconds.

Thanks buddy .. it worked like a charm ❤

this is the best tutorial thank you so much

Hi 👋 could you make video about front air bags sensor and how to install on this vehicle

Thank you for being brain dead simple and getting right to it.

Does that affect the airbag?

Thank you brother! 👩🏼‍🔧

And my dealership wanted to charge me $529.00 to replace the heat shield. It is the same issue as yours here! Will see about getting washers put in. I just dont know if I am mechanically inclined enough.

That's weird, I have a flex pipe in place of the flanges

thank you so much! very helpful when ours quit working on our long trip.

Remove the rear seat back first makes it just slightly easier

Any special torque wrench design specifically for wheel torque?

So how did you separate the engine from transmission if the engine is seized and can't turn flywheel to unbolt from converter?need transmission too right?

Fluid is really dark. How many miles on this oil since last change? Would you consider doing three oil changes to help replace most of the old trans oil?

Thanks so much. Why are these new cars so complicated

Your video was so helpful thank u

Spent 15 minutes trying to find the info you gave me in 30 sec...thank you👊

Amigo compré una honda accord 2013 no tengo resisto de cambio de aceite de transmisión me recomiendas hacer el cambio o dejarlo así ? Creo q esta teniendo problemas en transmisión porq de 1*a 2” avienta el cambio muy brusco gracias por la ayuda 🙏

Before going through the risk of cutting the nut off with a cutoff wheel try heating the nut with a torch or invest in an induction heater if you work on cars often. Another option is a Nut Splitter. Cutoff wheels can be very dangerous if your not familiar with how to properly use them. They spin at 1000s of RPM and if you get it in a bind the disk can explode and imbed itself in your arm, leg, forehead, face, eye etc. .. or it may jerk or kick back out of your hand and can do the same damage. Search on here for Grinding Wheel Explodes or Grinder Accidents. These are great tools but they are as dangerous as chainsaws, especially in untrained hands. I do a lot of sway bar links and I found the best way is to heat the nut until red (I prefer an induction heater) and then it usually comes right off with a cordless impact. Some times you may need to hold the back side with vise grips between the rubber and the sway bar itself. Good luck

Thanks

my headlight bulb connections are all gunky with a yellow paste like substance. should i be worried about that or is there an easy clean for it?

Thank you this helped a lot I just got a 2003 and this looks easier then expected

Omg never pry those apart they will leak from here on out

What I'd like is good instruction on how to get the rear seatback released. It's stuck. 2013 Civic. Tutorials I've viewed are not that clear, or helpful. Thanks.

Thank you

Is there any way to remove the bottom cushion of the passenger seat and replace it?

A very simplistic video, please continue what you are doing, thank you

Good instruction!! Thank you .😊

Need to make sure to torque the bolts or they could leak. 35 ft.-lbs. for the fluid drain plug and 12 for the check level bolt.

Very helpful, Yes.

You should do these tutorials naked!! That would be awesome cakes

Thank you bro. 😎 helped me out

NE cars undergo winters with salted roads that contribute to rust problems with heavy usage.

Thank you.