วีดีโอ

Merci bcp

Thank you my friend. You are amazing. Always be well

Thanks..

What a godsend!

Another method is, make alls operations like this video and check every time tensions on the thread on order to push, pull without any force, fill to finger.

Good video

very good advise all around, thanks for keeping it simple :)🎖

You helped.... straight to the point no *****hit

We have a similar mower, similar Briggs and Stratton engine. About 8 years old, we never drain it in the winter, just get all wet grass off it and grease it abit. Changed the oil once aswell. Anyway my dad put some of this American Marvel Mystery Oil in with the petrol, but he put to much in and it's been abit tricky to start, abit smokey, running abit poor. So today I added about 10 litres worth of dipetane from the 1 litre bottle which obviously was overkill, but I couldn't be arsed measuring it out and just used the measurements on the side of the bottle, it flows out the bottle very fast and its easy to pour a 10 litre measurement before you know it. Anyway, after quite a few attempts at getting her going I eventually just primed the primer like 12 times and she fired up. Ran smooth and strong, no smoke, it must of done something. Put some in the BMW 320d aswell today, seems like a good product.

New sub here ty

Excellent!

This is a bad video very bad video very bad video

Quick tip. Tighten the one really loose spoke hahaha…. Worked for me today!

Bike shops are too expensive and some crooked. I took my wheel to a shop to get a spoke so I could install and true it myself. The guy took it into the back room and and the next thing I know he is telling me I owe the shop 20 bucks or so because he had installed it into the rim. I said I had only wanted a spoke so I could do it myself and nothing more. Ticked me off because I had expected to pay no more than a couple of bucks for one spoke. A gal that works with my wife took her bike in for a tune-up and when she went back to get it they charged her over 500 dollars. I can't imagine that this 65 year old was riding a bike that even cost that much to begin with. Crooks.

What's up with those crappy thumbs down??? Great video!!! No talking and very clear instructions. Thank you, Thank you!

Thank you, this was very helpful; BMX wheel now true again

Dump the fuel and put fresh fuel in and 6% oil

thank you!

Great explanation

What a great straighten. I subscribe............

Good practice to Squeeze spokes before starting. Slightly deflate tyres first. Usually more twisting in center, and lesser on ends.

That’s awesome except the bike shop part. I’ve tried that before and when I received the rim back it was still bent. They said it was as good as it would get. It wasn’t nearly as bent as the ones in some of these videos of people fixing them.

Fantastic indications, thanks

Thanks! The wheel kept getting in contact with the brakes because it was bent.

I just destroyed my wheel by making wrong adjustment

How do I change the spokes?

Great video. One thing I did different, I took the tire off and flipped the bike over with the rim still on. I measured the width of the rim, and cut out a section on a 3x5 card. I then taped that to the frame so that the rim would be in that notched out area. As I rotated the rim, I could see if the rim was rubbing to the right, or to the left of that notched out area of the 3x5 card. I then used blue tape (it's what i had laying around) and put on pieces to mark the rim in the area that was rubbing (from the start and to the end). If it was rubbing on the 3x5 card to the right, I then slightly loosed the spokes on the right in that section, and slightly tightened the spokes on the left of that section. I did this for the entire rim and was surprised at how well I was able to get the rim back to true. Trust me the rim was really messed up after I stupidly just tightened all the spokes because a few of them had become loose.

good example of explanation no need more explain just straight to the point. loose the spokes nearest to you and tight the spokes at opposite side. half turn is enough to align you rim

I thought this was my rim problem? It seems mine is a problem instead of the small part of the rim has somehow, bulged out like a ridge. I don't know how this has happened as it just suddenly happened, I not hit or banged the rim at all. The back wheel has this odd small budge of the metal rim face in one place and only on the left side on the back wheel only! At first I could not understand why the back wheel was catching on the back brake pad? I saw this small 3 mm budge in the face of the rim... I had to undo the back brake such that it stayed open and undone since I could not get home with the back brake in the normal set distance from the rim as that then stopped the wheel turning. I never seen this sort of problem ever? Anyone know why this small bulge has just happened and how do I fix it.

THNX FOR THIS PHMIMMY, U ARE A GREAT SPOKESPERSON....

I would personally not loosen any spokes. If you think about it when the wheel was made it was true, after hitting a bump certain spokes lost tension and needed tightening to bring the wheel true again. Spokes can not get tighter when you hit a bump so don't need loosening.

That has to be one of the better wenches I have seen, where can i but one like that, oh and thanks for sharing.

Thanks for the video. Now i can fix my daughter’s bike. 🥃

@Jim White maybe I'm just going over thinking it, but I can't figure out how to get my wheel straight, does it matter what side I make closest to me? If it's upside down, the back wheel pulls away from the chain side. If that is confusing, imagine how I feel. Dyslexia is a b*tch. Your help would be greatly appreciated!!!!! Thanks, E.

Good... thanks.

thank you, so easy even I could do it and I don't even speak bike...respect

Will this rim full repair?

thumbs up man, helpful

excellent!

I have a bike without spokes. It's these racing wheels. How do you straighten the wheel then?

عالی بود

Short and to the point. Zero unneeded information. No talking.... no face time ....even better. Wish more did things this way!!!!! thanks.

Awesome. I'm not too handy, but this made it easy. Thanks for taking the time to do this video!

Thanks !!

Bike upside down right tightens left loosens correct ?

What if the wheel is way more bent?

Nice one buddy 5 mins and my wheel is sorted can't believe I biked around for so long with it out of true causing me stress, you've made my cycling enjoyable again, full marks and respect ;)

Just bought a new Trek and the rear wheel is rubbing brakes so will give it a go thanks to the instructions, thanks.

Very Good :)

I was following you till you did the spoke tightening and loosening. You turned the spokes clock-wise to loosen? And counter clockwise to tighten?