- 5
- 75 873
onlymarkallen
เข้าร่วมเมื่อ 26 ก.พ. 2011
วีดีโอ
Model 94 Holley Tips for Tuning/Ford Flathead Carburetion
มุมมอง 9K2 ปีที่แล้ว
A quick run down of common problems that may stand in the way of efficient tuning of the model 94
650 Vstrom Noise Explored
มุมมอง 8K5 ปีที่แล้ว
Looking into the lower case knock on my 2009 Vstrom. New clutch basket comparison.
Small Evap Leak Code Fix 2016 Ram 1500/Purge Valve
มุมมอง 58K6 ปีที่แล้ว
Small Evap Leak Code Fix 2016 Ram 1500/Purge Valve
Among my stash of flathead parts is a cardboard box I labeled “Holley Hell” containing 4 distressed 94 carbs. These are essentially carbs I rebuilt over years of failed attempts to produce viable results for my 8BA. I finally just bought a new 94 and achieved excellent confidence. That and a pressure gauge such as you recommend. One important thing I overlooked was that of an almost invisible difference between so-called primary and secondary versions of the 94. The two are jetted for applications for the dual carburetor setup. Now I know, but took a while to discover. Thank you.
I got this knocking on my 39K miles 650 I was pretty convinced it was the rear wheel baring that was shot but there is no side to side movement on the wheel whatsoever… I guess it’s this “thing” and the best fix is just no fix at all 😂
What jets an power valve did the 50 ford sedan bone stock top 2 bottom come with?
I got an original 8 BA carb at a garage sale and I don’t know how much it’s worth. Decent condition and could be cleaned up real well. Any ideas?
50 bucks tops
Nice, simple and thorough. Thank you. Taking on this challenge soon and this was very helpful.
Sorry i know this video is old but hoping for some help... Would this cause very rough idle and eventually it stalls? Spits and sputters and will stall eventually at idle unless giving it gas
Thanks for this vid man, I'm assuming the sound didn't go away? Tried to find the second video but couldn't find it. Thanks for the info !!
No change! I left a comment on at the top of the thread. It really is just the play in the gear mesh. Other manufacturers have solved this with various solutions but at the price point it is still a fine bike that performs well. And it's still quieter than a Ducati!
I might try this, I have an engine light and gas cap light on, maybe this would fix p0440 code? I have been through a couple of gas caps already with no luck. My eco light doesn't come on anymore when I drive, and remote start does not work.
Probably not, 0440 is a large leak, but I suppose it is possible. Also remote start is automatically disabled when a check engine light is on
Watched the other vids on this and You made it Quick and easy to understand! U Da Man onlymarkallen
So much good information. I will be adjusting the float level to 1- 1/4" and installing a fuel pressure gauge Thanks. 👍
I’m thinking I’m running into all those issues myself, having acquired my first Flathead. Carb looks new, hard to start, idles for awhile until car warms up-then dies. Try to rev it up and it just chokes it further…
Thank you! I’m trying to get to know a couple of these little guys myself. It drives me crazy how simple they seem, and yet they’ve been keeping me on my toes to say the least.
Finally someone that talks about the symptoms
Man I just bought a brand new 2022, it just rolled over 250 mile and started making this noise. I didn't see one video on this problem till after I decided to pull the trigger and bought one lol, I'm going to see what the dealership mechanic says and see if I'm still a happy camper lol.
The good news is that it doesn't do any harm internally. I noticed it only at idle. Much like a Ducati which they cloned. I bought a 1000 after and it did not exhibit the same problem. Both were great bikes over all that stood up to some serious use with ease.
@onlymarkallen it's still making the noise at 4000 miles, fixing to do my second oil change. I brought it to a dealership, and they were really concerned until they called suzuki, and suzuki told them it was a common issue with that bike. The mechanic said he owned a 1000 and it did not make that noise. I mean it was quite and then it wasn't, the mystery continues,lol
Great video thanks for making it. Very helpful that the bird was translating for the birds having this issue on their trucks 😆
I have a 2015 1/2 ton and it’s somewhat hard starting after sitting for a while I have a p0456 code and changed the fuel cap and the problem still there I’ll change the purge valve then
Thanks for doing this video ❤️
So the valve failed after 2 years? Nice workmanship.....but thanks for posting!
yep. I'm here with my 2005 wee apart with the exact same problem.
Those symptoms describe exactly what's happening with my 2016 ram. Thanks for doing this video!
Anyone get p0456 and p0441 does replacing the purge value get it fixed
very nice bike for a beginner like me thank for sharing
Just got a 2010 and I think I have thecsame issue. Did you ever find a fix???
You have to watch till the end, and read the follow up comment. There is no fix. A counter sprung gear such as you would find in a Honda would do it but they did not go that way. The slop in non lethal lol.
Thank you
Can’t believe I finally found the fix everything on this video matches my situation the hard start I just got the check engine light on and I’m also from El Paso where indeed the weather hasn’t change from 95 to 100 degrees thanks thanks thanks
Hope it does the trick for you! It is a common failure point. I have replaced mine a second time since I posted this video. I think you will be pleased with the result.
@@onlymarkallen first thing tomorrow thanks a lot honestly no one ever talks about the symptoms there’s a lot of people thinking fuel pump or fuel leak due to a hard first start of engine
Thanks for all the info on this bike. I’m about to purchase one tomorrow for my first road bike. I can’t wait!
Thanks for this video, I have a 2008 dl650 and I was planning on pulling the clutch out of my bike this weekend, due to the noise you are talking about, 20k on the clock, looked after v-strom, never ridden in anger, and I have been concerned about this noise for the past year or maybe longer. After watching this video, I’m not going to bother pulling it to pieces, as I can guess, I will find the same as you have, spend a great deal of money on something that doesn’t need fixing! Thank you for posting this and putting my mind at rest 👍
Awesome. You are exactly the target audience I was hoping to reach. Thanks for watching.
I’m in El Paso and have the same issue on my 2016 Ram 1500. Thank you!
what was the ecu code?
I'm so glad I found this. I'm also here in El Paso and I'm having the issue with the error codes 441 and 456. I got a hold of Dick Poe Dodge and Viva Dodge. I had dick Poe tell me it's going to take them three to four days to fix it because they're short on technicians and then you've got Viva Dodge that said I could take one to two days. I've got a 2015 with 52000 miles, never a problem with anything until now and I can't afford to be without my truck that long so I am thankful that I found this LOL and now tomorrow I'm going to find the part for it and I'm going to do this myself. So I greatly appreciate this video
Great! Let me know how it turns out. It is an inexpensive try at the very least. You can test the old one by blowing through it as I mentioned in the video. It is easy to change out for sure. Good luck!
@@onlymarkallen I definitely will. I don't feel like having my truck sitting at a dealership for 3 or 4 days or taking it in at the butt crack of dawn just to have someone drive me home and then come back and get me and take me back to pick up my truck. I don't have time for that lol I did call AutoZone and they do have it the part over on Lee Trevino but the guy I spoke to unfortunately was encouraging me to take it to the dealership since they "know what they're doing". I guess since I'm a female that automatically makes me incapable of figuring it out LOL so we will see and I'll let you know
Thanks, very informative video.
Glad it was helpful!
What was you’re truck doing
All there in the vid, the symptoms. And you get and evap system code with a reader.
Mr.Allen, Did you ever experience no start due to this issue? Maybe a misfire code? Thanks for taking the time to record and post...means a lot to us all !!
Yes. In below freezing temperatures. No code because the engine is not technically misfiring. It is a fueling problem with unmetered fuel vapor in the intake. In my case the engine stumbled badly at start and occasionally would fail to start in cold conditions. This was rare but did happen. Most misfire codes on these motors seem to come from failed roller lifters in certain years that eventually eat away the cam lobe and cause lifter tick and eventually a misfire code.
@@onlymarkallen thanks for the response!! Regarding the temperature, that's definitely not the case because the truck would not start at 90.degrees outside. Yes I'm aware of the cam issues with these Rams but I was told by a couple dodge techs that IF I had the cam issue, I would still be able to start the truck. Would run rough, but it would start. The truck ran perfect before this starting issue. No shake/rattle/misfiring.. Auto shops here are ridiculous, asking $200+ for a diagnostic fee per hr... insane.
My 2019 Ram 1500 has a p0441 code purge valve, I replaced the purge valve and I'm still having a check engine light come on after I drive it for a couple days, these trucks do not come with a gas cap
@@arizonacardinals6196 P0441 ... on your 2019 ram, is the purge valve at the engine compartment or by the gas tank/charcoal canister ?
@@GuciTheBulldog1 my purge valve is at the engine bay. I'm in the process of trying to find a solution currently and any help would be a blessing
I had the symptoms no check engine light on. Dealership put a new tippin in or something like that lol then 2 weeks later check engine light came on. Autozone said evap can. Replaced it and light is still on. How long before check engine comes off?
You have to clear the code with a reader. They can do it for you at AutoZone! If it comes back then you are still chasing the cause. Cheers
Or you can disconnect the battery for a couple mins to clear the codes
I am told 175-200 miles to complete diagnostic cycle
Unhooking the battery will only turn off check engine light temporarily, it WILL come back on.
Thank u
Was your check engine light on
video is so blurry
250 miles later and I can safely say that a new clutch basket has made no real difference at all. Only a slight improvement so don’t waste your bucks! Ride it hard until something really breaks! Cheers
Thanks for the advice mark, does it shudder around 3000-4000rpm? When I shift down to first I can hear a slight wine from the clutch, anything I should be concerned about? 06 dl650. Joshua. Cheers
Thank you very much for your Video! I was serching since a while for this information. Best regards from indoctrinated Germany
Thanks for the video man it really helped hopefully the code goes away now!
Did you have a high idle at times while driving and whatnot?
brian keiper No sir. Only at start up
hey man. great looking bikr. is that L size?
Sei não