วีดีโอ

Mine wont even connect, all i get is 'printer not attached '

What slicer profile do you use thanks

Pretty good, simple to follow

Looks like the screen is based on BTT TFT screens, the LED functions were designed for the rotary encoders which obviously this doesn't have, unless they patch some LED strips in and utilize that feature, this will be useless.

Yes now rotate it 50 more times thank you it makes it so much clearer

Please flip the pieces 30 more fucking times thank you

I dont know why everyone is so bad at this and keeps hating. I did it in 2 minutes with this very helpful video, just followed how he held the pieces with which fingers and how he rotated his hands

Terrible😢

How the heck do you just set the first group on the table without it falling apart... uuuuggghhhhhhh

Hello all

Thank you for putting this video together. This, along with the BambuLab one, really helped me install the P1P upgrade kit. I just got a P1P for Christmas and wanted to upgrade it. There are definitely issues with the BambuLab video and the current upgrade kit. I did not have any missing hardware. There were plenty of screws, My issue is that the screws are very difficult to properly identify. Ultimately it was a lot of trial and error. Also, many of the side and back panel screws were already installed in my P1P and had to be removed before installing the panels. In all, I did not have any missing parts and everything assembled properly. I do think BambuLab should create updated instructions as they revise the P1P.

this video pisses me off

blu tack FTW

Thank you for creating the hardest puzzle ever, and rotating the parts 734 degrees before joining them on the explanatory video. I hate puzzles. Especially this one. Why bambu lab featured it tho?

That's a full time job

What material?

Thanks for this tutorial, I was struggling with numbers on gear nob.

I want to ask if I use SB Pcb toolhead with klicky probe, does the bat 85 diode section have to be jumpered? And where do I connect the 2 microswich cables to the pcb toolhead, on the gnd and signal pins or 24v and signal?

I'd like to see a larger A-frame style vertical heat press that can extend over a wider space.

Well played getting views with this impossible to follow, 3 card monte from hell! 25k of the veiws are from me alone. I did finally get it. See you for another 25k views in a week when I accidentally knock this damn thing apart again. Cheers!

It did rhyme, sir, lol. Very cool, have fun!

Good job buddy

Small parts are easy, but how about a long part all across the bed?

Do you make / sell these enclosures?

I always miss the live stream, as I commented on video 5, those servos never come centred and it looks like that right arm does not lift because you glued the arm pointing out but with the servo to it's end rotating position, I'm not criticizing you I'm just letting you know for next time to check what position the servos are at before assembling anything especially if your gluing. They sell servo testers on amazon here in canada 2 for 10 bucks. you can position the servo to where you want with those. If you do end up taking it apart you don't need to glue the inner arm hinge to the servo when putting it back, If you glue the servo bracket on ( I drilled 2 holes and used 2 x 3mm screws to hold mine on) you can screw the servo on while holding the hinge in place and the servo will press the hinge up against the side panel holding it in place on it's own.

u didnt show taking the rubber gasket from old toolhead cable to the new one....my kit didnt have a new gasket

either ur hands are really big or the printer is just small🤣🤣

Just came across this build, I noticed in the last video you glued the arm servos and the arms together but you didn't check to see if the servos were centred first before gluing, if one servo or both were set to it's end your going to have to take everything apart

10 for the effort. - 5 for the actual result.. Next time, just show us something totally out of context, it will still be more clear than that video... Question: How can you edit a video and NOT realizing how messed up was that thing in first place ?

You are literally the perfect representation of chaotic evil

Love your channel

Hello

❤❤

Polymaker “Army brown” maybe this is the “Natural” ASA color? The photos on Polymaker Asa army brown looks a lot darker brown. Can you advise? I like the color you are printing! Maybe they changed the color? Thanks!

Where's all the comments? LOL

Bambu Studio has a lot of bugs where it doesn't sync I have it happen all the time. Telling support is like leading a horse to water you can't make it drink.

I'd have probably not used the black colour as it made it a little bit more difficult to see what was wear but It worked in the end so thanks

cool thanks you're such a help

I have thrown mine away it's too fiddly and not much fun. Thank you for posting.

I missed the live stream but gonna have to get caught up!

Now a Ken?

Congrats! ELO was a good choice!

congratulations

How do you slow the green layers?

Worst ever video...

I got so mad trying to solve it i crushed it with a sledgehammer

Sceoan ist Geschichte , die Firma gibt es nicht mehr , leider.

how did you manage to get this filament before other Canadians? lucky bugger :)

Awesome Video I recently visited your TH-cam channel and enjoyed your content. However, I noticed that your videos are not ranking well due to some issues. I believe that if these issues are addressed, your videos will rank better. Here are the issues I found with your channel: 1. Video SEO has not been properly done. 2. Videos are not being released on time. 3. The video titles are not optimized. 4. Keyword research has not been done effectively. 5. Video thumbnails are not appealing enough to attract viewers. Solving these issues will help your TH-cam channel perform better.

I like it! Keila said it has superman vibes!