วีดีโอ

Evga 3080 TI xc3... with the hybrid kit added.. flashed to xc3 ultra bios . Keep up with the 4070s ..will be getting the 5080 when its released ..first firestrike benchmark made the top 7 www.3dmark.com/fs/32615702

What is that graphic card? Rtx 3090?

there is no way to fix BSOD, its all only ever temporary fixes.. ignoring the issue will only make it worse.

Update for anyone interested. I visited on 10/9/23. There are a few sections I’d recommend every bit of 4-low on two uphill sections as they have been rutted quite a bit. Also one down hill section was pretty steep with rocks into a water crossing of a few inches. I did it in a stock manual Tacoma TRD Sport with stock Toyo A30 tires. I did all of parsons in 4-low 2nd gear.

How about drift in p c 1? Is it playable?

How do I get to that road from Gatlinburg?

I'll be in Gatlinburg September 23 - 30. I was undecided about this scenic drive, but after your video, I'll definitely find time for it!

Fyi just drove this today, 8/12/23. It has gotten ROUGH. Drove with my 2021 subaru crosstrek sport. There were storms here the last few days. Within the first mile or so in the beginning, there is a STEEP incline and it was very muddy with deep DEEP holes. Definitley needed my 9 inches of ground clearance. My Subie almost didn't make it up that hill. Back passenger tire completely off ground as front drivers tire dipped into deep hole toward the top of the incline. Very muddy and my subie slid to the left at the top. Only saving grace was XMode was turned on and put all the vehicle power into my back drivers side tire and got her out of the mess I put her in. Please please please be careful if you attempt in the next few days/weeks. Need ample ground clearance and definitely need AWD/4WD with current conditions from recent storms, very muddy. Plus if you have xmode or off road mode/assitance on your vehicle. Might be better if everything dries out in the future?? Good luck, have fun, get muddy!!!

Thank you for showing the entire length of the road. The last time I drove that road was June 2014 in a FJ Cruiser. It's hard to remember what the road was like then, but after the storm that closed the road, I've been wondering about how it was, especially with the sign that says high clearance vehicles. I have a Toyota Highlander and after seeing your car make it, I am game to do it again in a little over a week.

Thank you for sharing. I went there on 7/16 in my Nissan Rogue wanting to do the road but others said the road has gotten rough. Seeing your video tells me my Rogue will make it. It’s on my bucket list as I did Rich Mtn Rd while there the same day. Also, great music.

GG bro

can u tell me which battery does this drone use

Hi

I just got beat saber recently and wanted to try some custom songs, but found songs I like, like Ariana Grande, are too hard, sadly. Thanks for these suggestions! I needed them! 6:17 I like the little heart. Lol

sucha missleading title, people who look for an really easy song. My 5yo daughter loves to play Frozen - Let it go She plays it daily on Easy level. So im sure your relative can do the same.

Hola, que audiocard estabas usando?

Love the live digs enjoyed well done on the finds

how do i get this on oculus quest 2

omg one of my favorite songs by taylor swift was on there yay

im practicing with this for when i get one, thanks!

So no problem with physics or anything running at 144hz?

I have same problem now... 😕 .. with my rtx 2080 super.. please can you tell me how to fix?

I literally love this playlist. I am trying to get better by practicing o youtube without beat saber. THANKS SO MUCH FOR POSTING THIS!

Can you do more of this

I love this because I can do it with my Nintendo controllers

Okay, so I have one of those headsets where you just slide your phone in and use a VR option on TH-cam right? well sometimes I use that and watch these video and do the motions and stuff, just for like mild exercise or when I'm bored

Oooooo the love hearts like Jack 😍🤣

The first one is also on rayman legends

how do you connect you're controller to you're pc ? please i dont find any answer

i have the same problem :(

Great video my friend

Where’s galaxy collapse 😏

How to set higher resolution? I have a 3440x1440 screen but the game only maxes out at 2560x1440 ... ?

damn desperate for clicks

Try removing cmos battery on the motherboard, unplug power lead hold the start button for 20 seconds to drain power out of the computer, remove bios (cmos) battery for 15 seconds, put back in and power up, set bios to recomended or default and hopefully that will fix the black screen fan whirring probs.

i had this problem just a few days after plugging my 3rd monitor...first black screen after 2-3hrs of gaming thein it became faster and faster until just watching TH-cam 5min form boot. -replaced my thermal paste -reseated power supply -moved to another pcie-slot -used 1 monitor still the same same problem i'm gonna try adding voltage as instructed by someone on these similar videos.

Can’t wait to see those RTX 3080s you have, I’ve subbed so I can get the notification!

I have evga 2080 super graphic card system. I have built new gaming pc like month ago, only I use old is PSU. Last few days , my monitor turns off randomly and fan make noice. I have to restart pc. Please help is it bad gpu or psu?

Hi

False?

GUYS I FIXED IT!!!!!!!!!!!!!!!!!!!!!! ALL WHAT I HAD TO DO WAS INCREASE THE POWER LIMIT FOR THE GPU! IT NEEDED MORE POWER BUT THE LIMIT WAS NOT ALLOWING IT! After changing my PSU from 500W to 700W the issue kept on happening. I tried Increasing the fan speed, the issue kept on happening (Only when I had it at 100% it didnt) and it was really noisy. i was about to change my GPU but I just increased the power limit percentage in my AMD software and games ran smoothly! GPU needed about 20 to 30 watts more.

Hi, I own a 2080 Super RTX card and I have encountered this problem after a week , I think the reason for the problem is overclock processor I own a processor 9700K and motherboard Z390 overclock may cause the destruction of the internal pieces in the mother board and the problem may reach me gpu crashes the subject is somewhat complicated but I have experience in the installation of 3 years I encountered this problem after overclock Some people say I'm an energy provider is the reason or not enough I own a 1050w power provider and this is a very complicated problem I'm probably the problem because of a bad overclock or a problem from you not overclock the last solution is Clear CMOS so the computer works but you will return The problem after 15 problem will come back again my old computer works from 3 years i3 motherboard msi h110m pro-vd card 1050 no problems for me i did not do any speed break this all and this My thoughts, I hope I will be your help, Abdullah from the Emirates, I hope you forget this problem and buy a new screen card and learn from previous mistakes in the end this electronic cut in any moment may be disrupted please pay attention well when installation and not mess with the ready and experience will come after the years thank you haha sorry for the bad English use a Google translator for not having enough words .

your spending a lot of times on your knees in the sand when you could be swinging that ATPro. Get a scoop that you don't have to been over with. Put that hand held pointer away. Shouldn't need it at all on the beach.

Regards from Romania. The stand for Simplex is very nice! (seen it on thingiverse). Glenn, did you think to print a storage box for the Simplex+ (to fit in that empty space in the handle - armrest) ? There are 2 models on ebay (in fact, one model and two colors). Sincerely, i don't know how to design it and also don't have a 3d printer (but have a friend, new in this domain who can print it). Thanks

M320 fucking pussy noob playing server hardcore...

2:48 Ohh my god fucked bitch aimbot died 😅 😂

My 1060 6gb just did the same fucking thing. Black screen then tried to take off like a fucking helicopter then after a few reboots it just stopped working. I stuck my 1060 in another computer and it worked, then I stuck it back in my computer and it worked.

Guys i got that black screen and loud fans after the loading of r6s and the gpu temp is 50 in desktop u think should i change the thermal heat or its not the problem

Game looks like a cotton ball is over your eyes

my jam