วีดีโอ

I dont have the files readily available atm and the project got put on hold due to school and a house building project

using the Android build number

.... you can switch launchers!

thats epic i only got to almost 100 k then a drunk driver hit me and the wife putting us in the hospital over night and my fiesturd into a pick n pull :( it was much to far gone to repair sadly

​@@cec4 During its lifetime I've killed 2 deer, they hit on each side of the car. I've been rear ended, I hit a large raccoon and it tore the front bumper up pretty bad. Once I almost got into a head on collision and they ended up side-swiping the right side. It's still in great shape most of the damage has been repaired. The person who side swiped it their insurance paid us to salvage title the car almost $3000. I drive it daily to work still. It has no AC and the radio went out on it about 2000 miles ago. The reverse gear is a little wonky, it vibrates and sounds a bit off when I shift it into reverse.

@@HgRoller yea, I bought mine as a salvage title when it was 2 years old with the 5 speed and 21,000 miles for 1750$ then spent about 1500 getting it road legal and the doors to mostly close right, no front bumper cover or fenders and a bent hood of another car since the guy I got it from used the front end part(mine was T boned with frame damage, but still worked real well) , used it for lots of pizza deliver, in begining of 2020 a person failed to yield on a blinking yellow and I made an evasive menuver to avoid a direct hit and they messed up the doors on the good side of the car, used the money from insurance to fully fix up every pan El and door on the car, new trunk, hood, fenders, front bumper, hood latch, rear bumper, lights, seats, then 4 months later a drunk ran the light and it was super totaled. The passenger footwell was smashed in about 5 inches the engine was crushed into the front frame rails, and the passenger side was so smashed in the door boad outward. The shifter assempby was all shifted over and crunched it was bad.

​@@cec4savage title 👹👹👹

@@eviljesus6111 👀☠️☠️☠️

i cant remember, a lot of the stuff is tied to the serial numbers, but if you found the equivalant matco product version it would probley run. matco doesn't make scan tools they just re skin them

nope it was fine, however if you factory reset it in the android os settings it can cause issues, also it clearly says on the box its a 123x...

you can use the info in the video to get the app on your phone or a different tablet. there's nothing special about the tablet itself. i would say take the case off and see if there's any info but I'm sure some Lenovo tablet of whatever size this was would be findable for a couple hundred dollars at most and once you have that info if you wanna do just the screen im sure its a pretty easy find. just done get matco to do it they will rip you off XD

i believe you just have to buy a device that supports it, you can open the other device apk but they need a serial number for the licence, when it comes to these tools you mostly pay for the software license not the device, and the licence is tied to the serial number

​@@cec4that is smart! Both from Launch security architecture and you to recognize it. 👍

i would get one from launch

i did but i needed diffrent gears and i never ordered them

i dont have it anymore

i dont know i dont have it anymore

I do not know

i believe you just have to buy a device that supports it, you can open the other device apk but they need a serial number for the licence, when it comes to these tools you mostly pay for the software license not the device, and the licence is tied to the serial number

the matco is a rebranded launch product, i looked into trying something with autel but i dont think there's a recovery site to download the sdks, and if there is i thing there's info that ties the device to the software since the autels tend to be more incorporated. sadly i dont have one so i must point you to the googlies( one year later a reaply like this will be of use)

i cant remember, i thought i said in the video. its not really much use tho since the softwere for the higher end stuff requires the serial and all that

the123x has a mall function to but reset function

i dont belive it does, or if it does not a lot so best not to grind into it

theres reciews out on it now covering that, checkout th-cam.com/users/bigtb1717 i dont think he has this welder but he does some great contend on similar stuff

yee, it didnt take to long before i put a glass pack on it much to loud even with the cat intact. sadly a drunk crashed into us and the car was far beyond repair :(

as far as i know its doing well, i sold it and it started smoking due to the hot glue i pit in it not being high temp rated unlike the silastic they use in it. lesson learned there lol

there's a part two. lazy video thrown together no editing

@@cec4 I ended up buying this welder. Its pretty good. Great vid.

sorta, the connections weren't as good but the tech was better. ( 2.4 ghz instead of IR so can be used outside and much more range) idk if lepin is still around tho

damn we got us a baller over here! last i checked 1200$ isn't cheap, especially for a rebranded tablet that costs about 700$ from launch tech, and the launch tech isn't limited on what it can do.( the mistake was thinking anything off a tool truck is ever worth getting XD)as for "ford owner" i also have a GMT 400 suburban, and have owned Hondas, Toyotas, Mazdas( three miatas), a jeep, a dodge ( that was a peace of shit) a lexus, a subaru svx, maybe others i lost track. i don't trust a ford as far as i can throw one but the ford fiesturd i bought I picked up for 1750$ as a salvage title run and drive with a 5 speed manual, 2 years old and 21,000 miles. spent about 1500$ getting it road legal again and registering it and drove it to almost 100k but just short of that a drunk ran a light and ended its existence in 2020. the fiesta is also a shared platform with the scion ia/ toyota ia/ the mazda 2. run alway from the 1.6 eco boost tho, and the ones with the auto trans, and some of the castings on the 1.6, and the 1.6 in anything larger then a fiesta, and the three valve 5.4, and on and on and on. only good ford products that exists are Mazda's XD and sorry for the very late reply I don't have notifications on for this stuff and never check it

@@cec4 cuál recomiendas

Launch tech x431 V pro 4.0 is less then this the matco and can do more. But do research

@@cec4 thsnks cause i watch a lot reviews and not divide thankyou for reply

@@cec4 y el sutel que tal

i do not know sadly

How did you start with yours ive been needing ideas

@@TheMike5478 well i started with the exhaust and drop in performance filter, but once i actually started doing it, i noticed the body flex. So i ended up looking on kine for a company that made body braces and Pierce Motorsports popped up. I bought their front strut brace, rear shock brace and lower trunk brace that goes behind the rear seats and mounts the trunk floor. It did stiffen up the car. I would also get some aftermarket shocks.. Al Least the Bilstein B6 front and rear. And after a season my front wheel bearings were shot so have those on stand by ($60 so not bad). You can check out my TH-cam, i have videos of my car racing and its exhaust. Other then that have fun. I got 2nd place over all for the year in my class. It was my 1st year with the Fiesta and 2nd year period

U have an automatic