วีดีโอ

Super car!!! 🥇💯😎👍👍👍

Is the motor shaft 5mm ?

Yes a proper servo makes so much difference. Hugely underrated upgrade

Just being polite and wanted to let you know the volume is to low. Great video.

It appears to not want to lift the nose in flight, it also looks like it’s dumping the nose way to hard when braking in flight. I’ll bet turning the brake down and upping the punch would help this thing out a lot.

Is 62mm too large for the stock trx4m bodies? I’m looking and it seems like 56-57 is probably as large as I could go.

I’ve got one of these ez becs I’ve been meaning to mount up. Thanks for a very helpful video! 🔥🤘

Very in depth video, thnx, will now what to look for when i buy one!. PS think the silver sway bars do a good match with the shocks and a good contrast to the chassis!

Shock Retainer C-Rings a bit of a pain. Use the ProTek PTK-H-2104 2.5 X 12mm Hex head screws for the diffs (slightly smaller 2.5 vs 2.6 would fit better in new plastic hole). Add Kyosho VZ012B and 97001B if you want to remove the front spool, and make front diff work. You could also add extra spider gears to rear diff.

How does it feel relative to the sketer?

Cool video. Team Corally offer the best value for money in the 8th scale line and it's nice to see them tackle 10th scale. I would have liked to see s2 steel outdrives like their 6s line, though. But hey, they've still got CNC machined steel spur, so they're still one up on Traxxas. Sintered powder steel gears on a $1000 truck? Shame on them. And they offer rollers, so that's 2 for 2 After 3 upgrades my Kagama is bulletproof. 1) battery straps 2) titanium shock standoffs (ADU Racing) 3) i had to buy serrated wheel nuts but the Kagama 4 includes them, so there ya go. I've only broke two parts: a rear camber link and a CVA. But the battery straps will break, at least if you run a 2.2 pound 6s 8200 SMC they will 😂

What tires you recommend for this vehicle I was going to get a skeeter now leaning towards this kagama 4s . Most 1/10 tires seam a tad small like badlands these are 134 I’d like a tire just a tad larger for better jumping air control ???

Great bash. New Kagama seems really good 👍

Diffs are not the same. They are compatible, however, the 6s line comes with an aluminum center diff cup, s2 steel outdrive cups, and the internals are also slightly different. Jenny's RC has the 6s line diffs (and other upgrades) on the cheap. I picked up the 6s aluminum center-diff for $40 and sway bars for $20 for my Syncro4.

Good bash , unlucky at the end .. cant wait to get one 🔥

Black Friday around the corner. Might go with a team corally finally if any sales come up

I think they said same 6s dogbones cvd s and gearing . Looks like fun

What size pinion and did you have the part number ?

What size pinion did you use and is it a 5mm shaft motor

Nice man ... Looking forward to getting one 🔥

when i put the set screws in my skid...the tip of my allen driver snapped off in the set screw...luckily it was trogh far enough i could grab it wit some fluch cuts.... spin it out cut with a dremel..spint it out cut witha dremel , until i got it all the way out

How does it compare to the 4s kraton?

Humm, no spring steel outdrives besides some of the obvious changes. Love to see a 15t pinion run😃

Where to get parts for these?

The truck is based of the synchro 4 buggy platform and shares 95% of parts with current team corally models ! They will be hitting hobby shops now !

Soo' i never! 👀 On flat Packet like That's.

Hello i was wondering if the new motor you upgraded is better/faster than the stock one?

Looks great. What length shocks did you use? Are they in shock tabs or mounted down with the link tabs? Thanks!

Hey thanks for the video. Just wondering if I have to change the gear that contacts the ring gear with drive shaft as the spacing of new diff casing is tight 😬

Hello! Could steel spur gear from MT8 fit into MT10?

Mine very low as well. The manual says it's 100k fluid but feels like 30k because it's so low. Some yahoos here without reading the instruction manual, think they see no issue. They are not smart and whine about "stress on the drive train" We put a Max 6 in truck for a reason, drivetrain is not stressed even with 1 million weight fluid. My truck out of the box barely does wheelies on 6s. This is unacceptable and a direct result of insufficient fluid in center diff. I filled 75% with 200k fluid and much better. Ignore the babies. I am member of Corally forums and i talk to them. Many customers have actually NO fluid in the center diff, so this is a known problem.

I agree with you about having the car to fast not easy to drive 😮😁👍

Artfuldodgersdesign sells the brass portals for these.

Associated has always had great warranty service!

Nitro Gang lives! Im getting one soon.

Nice rig,built one of those acouple weeks ago put a brass 500 and a brass mount. Helped a little also made it rear steer.

I'm trying to debate between the Kraton 4s or a Mojave 4s. What are your thoughts?

Hey man thanks for the video. Just wondering if I can use the original diff housings or if I must change to do upgrade?

Appreciate the heads up. I’ll pass on this budget kit with quality issues better off spending more money for better bits. There’s a reason it’s under $300..including motor🙄

Wish they made a guard for the steering servo. I destroyed mine on a front impact in dirt and some gravel😢

Love building to

Nice. Fusion pro. What % of overdrive does it come with ?

Ive been hearing lots of bad things. But i have never been impressed with element like everyone else.

Mad little machine

😮😮😮😮 amazing❤

I'm thinking of doing a build with this using a bitty design p-gt3r body. I know the chassis says 200mm and the body says 190mm... Will that cause any issues do you think? I'm trying to plan out a custom build for my boss and unable to find a better 911 gt3rs body than bitty designs bodies but that are 10mm thinner than what the chassis is and it has me worried

Awesome upgrades! Rig is lookin’ great 👍

Looks bad ass man!!!! Too bad it won’t perform as good as it looks…. Not dogging you it’s just that kyoshos are mostly shelf queens. Actually I don’t know that just being an asshat!!!!😘

Holmes has the crawlmaster bl and 10 shooter half off right now. They are way better than the puller pros and work really good with the vfd. Crawlmaster hv or mamba x for esc.