Nice Job. I,m sure you are aware that you have over powered the boat with the 6 hp motor. They are only rated for no more than a 3.5 hp motor. I would check your local laws on HP ratings so you don't get into trouble.
You are absolutely correct other guy and their ideas about putting 150 lbs. Of B.S on a ten foot boat wow unbelievable it's all about the KISS keep it simple stupid I can certainly appreciate what you have done as far as maintaining room remarkable job yours is one of the top videos on TH-cam the only difference in mine is the rod holders are on the inside above the floor
I miss you baby...i won't be tired watching and listening to you...hearing your voice gives me comfort and all memories we had will never forgotten..i love you and i will always will
Very nice. How did you create the front tray for the rods with the half moon pieces of PVC, and did you Velcro all the PVC pieces down, or did you have to use screws any place. I'm just leary of how well screws will hold after some use. Thanks
Wow! I have to say I've looked at alot of videos on TH-cam with this boat. All because I'm thinking about getting one also. And your setup is definitely one of the best setups I've seen. Great job sir.🙂🎣
Wow! Love the organization/engineering! Love the rod storage/staggering and keeping one side open. Smart. How do you like the trolling motor mounting system? Hope you do more videos! Thanks.
THIS video is over 5 yrs old but i noticed that boat is only rated at 3.5 hp. wonder if he ever had problems with transom vibration..others have stated there is transom flexing on this boat..
Are the trailer bunks underneath the pontoons? Or in the center in between the pontoons? I set my trailer up and am trying to figure out which way would be best
Hello, sorry im not on here much now days. I positioned the bunks on pontoons (inboard of the center ridge. Then set the side bunk / guides as close as possible and she will load good every time. Good luck and tight lines!
Beautiful job ! I just picked up a Mercury 3.5 hp and should probably get a motor support or transom mount...It looks like the motor is fully vertical with transom mount. What brand did you go with?
Working on my new Raider 10e. I also like a stowed trolling motor that doesn't take up any deck space. Did you just shim up the area under the frontmost part of the mounting plate. Hard to zoom in, looks like something in the divot above the handle. What connectors to mount the plate? In hindsight would you do anything different? Thanks for any help you have to offer.
I see this was posted 2016. Are you still happy with boat? Thinking about getting one. Is it just as or more stable than 12' Alum Jon boat? Seats look comfortable. Where did you get them? Thanks for sharing.
im 17 and bought one for my first boat i have been in many small boats but this boat is one of the best me and my brother both have plenty of room and it is really stable for a small boat
Nice Job. I,m sure you are aware that you have over powered the boat with the 6 hp motor. They are only rated for no more than a 3.5 hp motor. I would check your local laws on HP ratings so you don't get into trouble.
If you think THIS is tricked out, go check out "Craftsman on the Lake".
What is your floor made of Indiana raider owner
garbage
Nice clean setup! I love these pelican bass boats 👍
Can't get them in Ireland ider
Great boat
Nice mods , very clean and organized
You are absolutely correct other guy and their ideas about putting 150 lbs. Of B.S on a ten foot boat wow unbelievable it's all about the KISS keep it simple stupid I can certainly appreciate what you have done as far as maintaining room remarkable job yours is one of the top videos on TH-cam the only difference in mine is the rod holders are on the inside above the floor
I miss you baby...i won't be tired watching and listening to you...hearing your voice gives me comfort and all memories we had will never forgotten..i love you and i will always will
I like your rod holder 😉
Nice Mods...Did you use well nuts for the cleats you installed or do you think screws w/ adhesive are adequate?
Very nice. How did you create the front tray for the rods with the half moon pieces of PVC, and did you Velcro all the PVC pieces down, or did you have to use screws any place. I'm just leary of how well screws will hold after some use. Thanks
Wow! I have to say I've looked at alot of videos on TH-cam with this boat. All because I'm thinking about getting one also. And your setup is definitely one of the best setups I've seen. Great job sir.🙂🎣
What type of seats?? I really like the set up love the rod holders very nice great job 👏
Can I ask how the seats dont blow out on the road? Very nicely done
Wow! Love the organization/engineering! Love the rod storage/staggering and keeping one side open. Smart. How do you like the trolling motor mounting system? Hope you do more videos! Thanks.
id love to see more detail on how you mounted the trolling motor!
your a loser
Awesome
THIS video is over 5 yrs old but i noticed that boat is only rated at 3.5 hp. wonder if he ever had problems with transom vibration..others have stated there is transom flexing on this boat..
You could add head and deck lights for night fishing
40 people are jealous
Are the trailer bunks underneath the pontoons? Or in the center in between the pontoons? I set my trailer up and am trying to figure out which way would be best
Hello, sorry im not on here much now days. I positioned the bunks on pontoons (inboard of the center ridge. Then set the side bunk / guides as close as possible and she will load good every time. Good luck and tight lines!
Beautiful job ! I just picked up a Mercury 3.5 hp and should probably get a motor support or transom mount...It looks like the motor is fully vertical with transom mount. What brand did you go with?
What did you use to mount the plastic half pvc rod tip holders? It’s a block and is it plastic or wood?
use coarse wood screws and dont drill. Firm hand pressure on screwdrive and screws will go right in. Do not over tighten scresw. wooden trim
What did you use to mount the foot control motor on the side? Did you have to shim it?
Very nice man
Way to much HP on the motor
This is a nice set-up I have the same identical boat. Please share with us how you have your Trolling Motor mounted and secured to the boat
really good setup i run the same motor on mines and i love it next is a trailer
Very nice sir! How did you mount the trolling motor? Toggles? Rivnuts?
Working on my new Raider 10e. I also like a stowed trolling motor that doesn't take up any deck space. Did you just shim up the area under the frontmost part of the mounting plate. Hard to zoom in, looks like something in the divot above the handle. What connectors to mount the plate? In hindsight would you do anything different? Thanks for any help you have to offer.
Looks good I would bet your over weight
I see this was posted 2016. Are you still happy with boat? Thinking about getting one. Is it just as or more stable than 12' Alum Jon boat? Seats look comfortable. Where did you get them? Thanks for sharing.
im 17 and bought one for my first boat i have been in many small boats but this boat is one of the best me and my brother both have plenty of room and it is really stable for a small boat
Best organized boat I did the same by two hours boat was a mess again lol
had to stop watching - the jello made me dizzy sorry
The boat is only rated for 3hp. Why are you running a 6 ????
Why not.
What size trailer are you using, been trying find one for mine
How did u mount that trolling motor?
I'm on my 4th Pelican. Great boats th-cam.com/video/L1N9VqEteWg/w-d-xo.html
Is this for sale yet?
Awesome job on the boat!! Working on my boat right now. Thanks for the great ideas
Great video, but the Bass Raider is rated for a outboard motor (maximum 3.5 horsepower)! I love your mods, I have one being shipped to me.
I would really like to know how he did a couple key things on this boat. one of if not the best bass raiders i have seen.
Isn’t it only rated for a 3.5 horsepower?
I’m having a acid flash back the walls were moving like a wave
Does the trolling motor being mounted on the side affect the "steering" of the boat? I would think it would try to turn the boat when being used.
... If I may, many boats (bigger ones) have the TM off the side. No, it does not affect it to the point that it is a problem. .
With 78k views you need to make some more videos
Love how clean this boat is and organized a must when fishing!
Thinking about getting this boat soon,thanks for the vid and it looks great,tight lines brother! 👍