วีดีโอ

You’ll want to use a grounding lug on each section of bonded sub-array or array. Our PVKIT will bond each column of modules, and by using a bonding jumper (or similar) to bond column to column, the entire sub-array will be bonded. Then, a grounding lug can be used to run a copper wire to ground. The grounding lug can attach to a module frame or a PVKIT disk. Grounding lugs, bonding jumpers, and other useful solar hardware can be found on the hardware section of our website (www.s-5.com/hardware), and can be purchased through our distributors.

While some projects certainly still have more success with a tilt mount system, the roof top solar industry has largely shifted towards flush mount systems. This is mostly since module efficiency has improved to the point that the ROI from the project is often better with flush mount systems compared to tilt. Flush mount systems can have more modules/roof space, compared to tilted modules which can get better efficiency per module due to the ideal tilt, but module/area is lower since space is lost due to shadows from the raised modules. Tilt mount systems also face much greater wind forces compared to a flush mount system.

Which hooks are you referrring to? If you mean the GripperFix struts, they're available through all our distributors. Here's a link to one place they can be purchased through. buys-5.com/gripperfix-utility-mounting-system-for-metal-roofing

You can find them on the Hardware section of our website at www.S-5.com/hardware

Yes, you heard that correctly, corrugated flooring. www.homedepot.com/p/Rubber-Cal-Corrugated-Composite-Rib-4-ft-x-8-ft-Black-Rubber-Flooring-32-sq-ft-03-168-W-CO-08/302635091 Corrugation is truly used in all sorts of applications.

Thanks, Aaron! Check out our other video: "Maximize Your Solar Potential: A Guide to MLPEs on Metal Roofs!" - th-cam.com/video/y00bKmKbNK4/w-d-xo.html Please email us at support@s-5.com where we can help discuss your project more specifically.

Thanks, Aaron! Check out our other video on Wire Management -- "How To Optimize Solar Panel Wire Management!" - th-cam.com/video/ZSWc3jTPeoE/w-d-xo.html

We're glad to hear you found the video helpful!

Thanks for reaching out! This question is a tough one, and the answer will likely vary based on the exact kind of metal roof you have. Please reach out to us at support@s-5.com and we'll be happy to discuss this with you further on a project level. Roof flashings are not something S-5! manufactures, but we certainly have industry partners who are experts in this subject matter.

We are glad you found a solution you like. Just please note that this project is on an exposed-fastener roof, which has hundreds of penetrations already - as is the way these roofs are supposed to be installed. We have a non-penetrative solution for standing seam roofs which is what you might have.

We entirely agree. This video is for visual demonstration purposes only. We don't want you to place your modules upside down.

What I believe you are describing is a common misconception. What you are referring to is when buildings are designed with a "slippery roof load reduction". This is quite rare, and in nearly every high snow load area, using a slippery roof load reduction is against building code since buildings must be able to safely withstand the absolute most snow load the project location could experience. Adding snow retention on those roofs does not pose a risk, since the buildings are designed to handle the entire snow load that building code dictates.

Thanks, Michael! Happy to hear it was useful to you.

We are sorry to hear this. Please reach out to us at support@s-5.com and we will connect you directly with a distributor who makes sense for your project.

We're very glad you liked it!

You can find all the materials that were used here on one of our distributor's websites - buys-5.com/product/satellite-dish-mounting-kit

Hola Rafael. Si, vendemos en España. La compra es a través de nuestros distribuidores. Puedes encontrar a nuestros partners oficiales en nuestro localizador de distribuidores: es.s-5.com/how-to-buy/ ¡Gracias por tu preferencia!

Our PVKIT allows for gaps and spacing to meet ASCE 7 allowance for load reduction. Please reach out to us at support@s-5.com if you'd like to discuss further.

Grounding is most commonly achieved with a third-party, UL-listed, grounding lug which can attach to our PVKIT disk or the module frame.

You heard correctly, you've got a $50 Visa gift card coming your way! We'll be sending an e-mail to get you your prize soon.

Please send us information about your roof to support@s-5.com and we'll be happy to assist further.

Here at S-5!, we only manufacture attachments for metal roofs as we believe that metal roofs are the best, most durable, most versatile, and longest-lasting roofs available among other advantages. Metal roofs also make an excellent platform for mounting solar. Standing seam roofs in particular are extremely durable and allow for penetration-free attachment of solar arrays using our clamps and these roofs with solar attached can and often are engineered to withstand wind speeds of 185 mph +. Arrays are most often installed on south-facing slopes when possible for the best exposure to the sun and with the greatly increased module efficiency in recent years modules being at the optimal angle to the sun is not nearly as critical as it once was. Rooftop arrays often include wire screens around the perimeter to keep critters out that would build nests and chew on cables. As common as rooftop arrays are nowadays, module manufacturers have taken into consideration the extreme temperatures that roofs can reach, and the electronics are designed and protected accordingly. If you would like to discuss any other concerns or questions you may have please reach out to us a support@s-5.com

If your roof is the weakest part of your home, you need to fire your architect!