วีดีโอ

Thanks and easy to make

Yes. I usually work directly with trappers own fur.

@@ashleyanderson2859 thanks !

Sure these were from Carlson Furs in Minnesoat he has variety of fur types also. On facebook and at carlsonmink@gmail.com

Part 2 is on it had a different photo. I made a change, so both titles are same now.

@greenmax89 deannamccormick80@gmail.com Sure i could do it

@Sam-gf1eb yes , you can always shorten them a bit but this is pretty normal size

@@chrispusey8873 make yourself one :)

@ I’m trying lol. But it’s about impossible to find a working Boris machine. I have a heavy duty Singer machine but it’s nothing like your machines. Is it possible to sew fur with a regular sewing machine. I have found many Boris machines but they’re primarily for show/not working. But I’ve watched a lot of your videos and I’m just floored lol. You do absolutely beautiful work.

@chrispusey8873 a fur machine gives best results

@@StephanieApolinar-t6i they come split that way

@@ashleyanderson2859 thank you

@@stuntmachine3633 Samuel Bauer Unlimited, furrier supplier you can fin online, but you need to call order in , they are nice

@@sydneysoucy4807 watch part 2

@DebbiePike-q4v hair diection is usually always down

@NickPellegrene super, a great FB group is Fur, Skins, Sewinf the craft of furriers. Check that also

@@RosemaryBinder-n9c my email is deannamccormick80@gmail.com, im booked into feb. That size is 750.00

@@lylegalloway8203 what are you planning on sewing, i have a B 27 that works well on heavy stuff

@@joshuabogart1 i buy that from Samuel Bauer Unlimited, best priced, it is called Cold Tape , a roll is about 7.00, works great

@@tyreekwashere3238 you could try it, not sure

Glad it was helpful!

@jacoblandreneau5068 Yes, email me at deannamccormick80@gmail.com, i will mail it out. the cost is 25.00 , you send payment after you receive the pattern

I might I'll look for that.. but usually I take 4 oe 5 threaded needles. place face on front of hat where I want it and then push the threaded needles down thur the face into the body of the hat , prior to putting the lining on, draw the thread tight , knot and then with a different needle start sewing by hand along the edge down, stitches kind of longer . it will hold and at the back I do the same. hope this helps,, if you place on a stryofoam head you can hold the face well with the needles pushed into the fur / face

@@AlecKelsey-g3u should work great

@leroyskinner4206 I'd do the rabbit first, dont over stretch on second nailing. Cold tape edge after its blocked, and will help in sewing the fox on the fox should be blocked first time , probably wont need a second nailing on that if you cold tape edges so it sews to rabbit evenly

@@McCormickLeatherandFurs great, thanks!

@leroyskinner4206 i feel not many can successfully do that without scorching and burning the leather of the fur. Also, i feel that when it's fused, it dries out the leather . I've spot fused to hold but prefer to tack it down .

@@McCormickLeatherandFurs that makes sense, thanks!

@hollyhealy6197 thanks so much, I'm glad you find it helpful !

@tyreekwashere3238 email me your address i charge 25.00 for the pattern and will mail it out to you

@@seewaage good luck you can do it

@@McCormickLeatherandFurs Thanks! I really like the pretty liner you chose. I will probably do something like that too b/c it adds so much to the beauty of the work.

@@d.mccann9823 your welcome

@@Orangelionfur agreed :)

Thanks for all the videos Deanna.Could you share what cleaning liquid you’re using.I read where someone used acetone in the mix and then put fur and mixture in a garbage bag tied it off and put it in a dryer on air dry for 20 minutes.I tried that and it didn’t seem to do much good. Thanks again.

Call samuel Bauer Unlimited and get their fur cleaning solution . I used PERK a drycleaner solvent its not on market anymore, you could try denatured alchol. But not Acetone. ​@user-kd2mv1uw3g

O K sorry it was actually mineral spirits if that makes a difference

@@JOHNBRURING denatered alchol or stuff from bauers

@EmptyBox68 amazon, i think i put info for it in the description

Alright. I probably didn’t see it. Thank you!

a.co/d/cfQQjTY

@ryanmosley8250 i have a Bonis brand Fur machine, its a model A 16.

@McCormickLeatherandFurs ok thank you. Might be a dumb question but how would you recommend washing these if you needed?

@ryanmosley8250 you cant wash in water. Fur will shrink. You take to a furrier that cleans fur coats, its cleaned furrier method. Which is a fine dust of corncob fractions mixed with a solvent. The mixture is either hand rubbed into the fur or the item is put in a large drum ( dryer type machine) its tumbled so the dust works thru the hair the solvent mixture cleans, the grease, body oils , adhere to the dust. The dust is blown or shaken out, and fur is nice n clean. Basic description.

You are welcome!

Fur fun make a bunch

Ya fun beaver pelt, great way to do any fur pillow

Thank you

When it's big large blanket it is a big amount of work, when your setting up 18 pelts for a project it's almost like setting up pelts to make 18 pairs of mitts or 18 hats, the only difference is how it's cut and constructed after the pelts are wet stretched. They are a lot to manage when they get over 14 skins for me. My favorite size is the throw 6 or 8 pelts it's a very versatile size to use, and to clean if it needs cleaning.

good luck

Have fun!

Thank you

@@McCormickLeatherandFurs beaver prices were good this past year.

Coming soon

It should be fine, even with thicker seams, good kuck

Carve one out of styrofoam , you can buy a Styrofoam head form , or get a similar type head , wig head might work, good luck

@@McCormickLeatherandFurs thanks so much

Yes buy at Samuel Bauer Unlimited a furrier supplier for supplies you have to call order in.

Thank you!!