วีดีโอ

Thankfully these videos are going to follow the book and it should not use fancy electronics, the whole point is the ribber, the ribbing, the racking, and then the fun of the Lili buttons are a bonus.

The kh 910 is a hard beast to learn, but the Ribber is very user friendly.

Sounds like you either need to tear it all the way down to clean it, or you might need a new motor. I have only changed a few motors in my time, I have not torn apart a garter carriage to the frame yet.

@CJMactaggartknits been at it all day whatever it was it's working now thankyou message about with the speed control and away it went

You can find the Cable on the Img2track website. Daviworks makes them in house - so it is ready to go when it arrives. If you make your own there is some work you got to do to make it work. I also suggest finding a extension cord for the 8 pin port if you can find one - it will prevent accidental snapping of the pins.

Sorry, I forgot to reply. I will get you the number I used.

Ok the thumbside - I custom made a pattern - it is 3 x 3 squares (you can use 2x2 easily if you take a 1x1 and stretch it both ways) and the fancy side is stitchword #38.

Well... this is 2 years ago. I know the tension was 6. The yarn should have been a 2. I was using Loops and threads "wool like" from Michaels craft store for a lot of my projects back then. But... I will go check. I love that stocking and have it not far away.

Yes, the White yarn and red yarn are both Loops and Threads wool like - and it is a "1" which is "super fine" yarn. The thicker yarn used for the weaving was a Medium yarn.

Absolutely. That is the only reason I have it. One does have to be careful and align it perfectly. and go slow. I do not use it in my videos because it would not be fair to folks who do not have one.

I am having to relearn the passap after not using it for more then 3 months. Lots to remember. ArtofClay is a really good mentor and we are looking forward to knitting a few projects together soon.

@@CJMactaggartknits Great that will be awesome for both of you. Are you in the USA or Canada?

@@galaxythree4653 I am in canada, Art of clay is in Europe.

I am planning on making a few more videos on the passap - with the help from ArtofClay. I am sure I can figure out a way to do this hat on the passap, mittens too.

Which needle? do you mean the machine itself - it's spacing is 4.5mm.

My needle stock on my lace carriage I found a way to fix it. Now every time it knit it drop stitches

@@EnjuAhmed you should order some new ones. You can buy them on Ali Express you just need to make sure you order the right ones for your machine.

I will see if I can edit it in some way. Thank you for your suggestion.

I made some changes - let me know if they work.

Absolutely. I just need you to do a tension swatch and then share your tensions with me. Then I will post a Quick video on the Bulky for you. Please tell me your yarns name and I will put it in the video too.

I made this mitten and I must be doing something wrong because the side seams are really loose you can see through them. What could I have done differently to make the connections tighter?

@@nancyjones6784 You did NOTHING wrong. Your yarn might be too thin though. Mittens are so hard to get perfect. The best way to get perfect mittens is a tension swatch, and a good knit leader pattern. It is luck if you can pick a yarn that works with another persons pattern. Another thing you can try is using a different seaming technique. Sew as you go is tricky. Knitting it in 2 pieces and then sewing both halves together is way easier and I think it looks neater.

@ Thank you I was not sure as this was my second project since getting a knitting machine. Thank you for the great videos they were extremely helpful.

Its stitchworld # 20

I noticed that when I was editing. It's one of the many things I do not know until I edit.

AWESOME to hear !!! I am working on Mittens inspired by flat bed socks for Octobers knit a long.

no. not all. There is a chart in the manual which states which punch card work for which of the settings on the carriage. And if you bought a secondary set, they also have a index normally which tells you what they do. For example Weaving punch cards do not work for slip or tuck. And you would not use Lace punch cards for Fair isle etc.

@@CJMactaggartknits Thank you so much for this information. Sadly the charts you speak of did not come with my machine, in fact I don’t think the few punch cards I got are even the cards for my 360K. I’ve been doing trial and error and I have managed to do a Fair Aisle swatch (with much difficulty). I have had a lot of problems with this machine as some of the parts were missing and the white bar under the carriage was cracked and it would not knit. The person I bought it from did send me another piece of carriage that she had listed for parts only and I was able to use some of the parts from it to fix the carriage. I have had to replace bent needles, clean, and oil the machine. This is my first punch card/knit radar machine so I’m not really sure what I am doing. I do have the LK150 and even a Bond ISM, so I’m somewhat familiar with how these machines should work. I do enjoy your videos and learn from them. Thank you!

absolutely. But not everybody has one.

YES ! You are correct, BUT one has to remember it's backwards on the ribber So you would remove it on waste yarn - reverse it, hang it on the ribber, Then start section 2. One can also do the Sew as you knit when knitting the 2nd section to avoid having to seam it.

I have used needles of steel, and machine knitting etc. But I have also used Design a knit. Tell me more about what you are looking for in a pattern. Do you want V neck or crew? Pockets or no? cardigan or just a Really simple sweater?

@CJMactaggartknits I am only starting out I got 230 knitting machine from my sister and need some patterns that I can follow 😊

@@maryvanbree4482 Well then. A another great resource with LOTS of easy to follow patterns are on the "blog spot" for the Ultimate sweater machine. The USM has a similar tension to the KH 230, uses similar yarns, and the patterns are easy to follow. I will post the link for you. Because you are just learning to like your machine - for the USM patterns just used Tension 4 on the KH 230 to start. As you get used to your machine then go up or down on the tension dial. Also... make sure you change the sponge bar on your knitting machine.

@@maryvanbree4482 bond-america.blogspot.com/2018/01/free-projects-patterns-for-ultimate.html

@CJMactaggartknits thanks so much I was to a point of giving up till I saw your videos thanks again

The scallops are only on the base. I just finished the full sized scarf. It's pretty cool. I will post the photos on the facebook and then make it the thumb nails for the videos. I am going to see if I can get it on a maniquin for more photos today.

The full size project is coming up this week.