วีดีโอ

Unfortunately, not unless you buy additional equipment… but they do make some universal mount that might work.

Yeah I think that’s the same spot many people on this thread have found themselves… there have been a few good ideas shared by folks down in the comments.

That sucks, sorry unfortunately I don't have any good suggestion but I have a few tech friends that I might be able to ask and I'll drop it here but.... hopefully you are able to figure it out before then.

​@@DetroneDoesItThanks. I wonder if I could remove the screws, pull it out and be careful spraying the sensor?

That is really good advice, I experienced the same thing with each of mine.

I hope you found it useful... and if not I hope it was at least entertaining lol. I'm sure you got this!

??? Thanks... I think

Thank you very much... I'm glad you find the videos helpful

Unfortunately I don't have much experience with HD backup cameras but after using this one for a while... The video quality is not bad at all.

This should be the Amazon link to that Mattress... a.co/d/hXq7Nuo Thanks for watching and I hope they are excited too!

Whoa... That's quite a comment. While I'm no expert, I would be willing to debate the merits of your claim... except you forgot to include your supporting evidence. So I'll just say thanks for watching and leaving your opinion.

@@DetroneDoesIt no need to get defensive just educate yourself..

You commented I don't "understand how surround sound works" without identifying how I was misinformed... and instead of taking the opportunity with the follow up comment to clarify... you tell me to "educate" myself... without pin pointing which part of the 8 minutes video I should be more educated on. I'm wasn't trying to be defensive, I was hoping you would have provided context for your statement. Sorry if I offended you with my response.

Glad you found it helpful, but it is unfortunate that your AC dashboard is not longer working. I don't have first hand experience with this, but if it was working prior to removing the radio, I would start with making sure you didn't accidentally disconnect to damage the connect to the dashboard first. Then I would troubleshoot from there... Fuses would probably be next on my list.

Thanks for watching until the end...

It really depends on how much of it you spray on there. The cleaner dries pretty quickly... So anywhere from 30 seconds, up to 5 minutes in my experience.

Thanks… Gotta stay busy

Sorry I’m probably no help with Roblox 😬 Are you getting an error message or is it crashing when you try?

There are a list of items that could potentially cause what you are experiencing… Is the MAF sensor installed correctly, since issues with the MAF can cause rough idles and stalling, but so can a bad fuel pump or bad fuel injectors. Do you still have a check engine light and if so, what are the codes? If it’s MAF related but you installed the MAF correctly, could have a vacuum leak of some sort especially if you addressed the coil pack issue.

I have an actual screen

Thank you for your feedback… unfortunately I can’t post the AM install yet because I incorrectly wired the replacement and blew the radio 😬… but a proper install is coming. Thanks for watching!

Sorry I’m not sure how much power it uses while running.

I would love to put together that video for you but unfortunately I have long since gotten rid of my Titan, sorry. Thanks for watching though

Thanks for watching and sharing! This might be super useful so I’ll pin it to the top incase others are still trying to resolve their issue. Thanks again 🤜🏽💥🤛🏽

Thanks for the helpful information. Luckily I test my detectors regularly when I install new air filters monthly, Kiddos know the escape plan and meeting points and my home is only 5 years only so hopefully they are not expiring anytime soon. I was unaware of the dead air space concept (here’s a quick definition from the internet for others who might also be curious👇🏽 “A dead air space is an area in which trapped hot air will prevent smoke from reaching the alarm. This space generally occurs at the apex of cathedral ceilings, the corner junction of walls and ceilings and between exposed joists etc.”) Thanks for watching and sharing tips!

No problem, glad you found it useful!

I used a very unsophisticated method… I placed a small piece of wood toward the middle of the net at the bottom and generally the magnets sit on one side of the wood and it helps it stay in place… but that only worked about 50% of the time. Otherwise I have to manually hold it out as the garage door begins to lower. I always considered placing some weighted clips on the bottom but did not want to put too much pressure on the net. If you come up with a good idea, definitely come back and let me know.

@@DetroneDoesIt man this is stressin me out haha

@@legend53beast63 hahaha yeah I know your pain

That’s a good idea… The manufacturer who sent it to me told me that the ideal place for the monitor is to be suctioned to the front windshield.

Hahaha Glad I could help… Yeah TH-cam is usually my first stop, that manual generally doesn’t even make it out of the box 🤣

Glad you found it helpful! 😊

You're welcome!

All the material for the bus 70%to 80% off at Lowe’s, and Home Depot, any small defect and this was cedar-wood discounted.

The engine was damaged I sold it for $700.😢 it worked good for 2 1/2 years but that was a big loss after putting a new tires to left and right arm control a steering box max fans so I understand the pain of losing cash.

After losing that a purchase a 2011 Ford Econoline for $1200 bucks with 200,000 miles on it total issues so I had to render it back to the guy who sold it to me, but that was a good deal!!!😅

So presently I have a 2011 Chevy express 4500 Duramax diesel with 230,000 miles on it purchase $4900. It was a Utah bus a little rust but the transmission engine is perfect. Third time charm.😊

Wow! You have had some interesting ones so far... I really do hope that 3rd time is the charm for you. I was bummed out by the money lost but I got a lot of valuable experiences from this process and if I had more land or a mobile career, I'd but another one in a heart beat. Thanks for watching and sharing your experiences.

You can do it! Good Luck

This sounds like a discussion you should have with your parent or guardian. Sorry I can't help here.

I'll try but they over react so I'll be careful 😅

Did you change the mass air flow sensor or cleaned it? If you replace it, I do believe that Nissan suggest that you have it reprogrammed/Relearn process... That part I am less helpful with.

I hope so too!

I appreciate the tip, although I don't think that placement would break the air purifier (it's worked well for the last 2 years) , but I can agree it might not lend itself to optimal performance. As an update we did move the purifier to a different location now that my kiddos are familiar with not knocking it over. Thanks for sharing 👍🏾

Thank you, I appreciate the support! I dropped a link in the description if you decide to pick this up... I could make a commission on it (or not 🤣). Also they release an updated version of the PJ40 also, which looks pretty nice also.

Glad you found it helpful! Thanks for watching 👏🏽

Yes, the HDMI supports the arc function

@@DetroneDoesIt thank you very much for your response. That’s very good to know

Thinking bout buy this, does it work with Chromecast?

I completely agree with you, in the full video I mention that this light is not ideally intended to be used the way I was displaying it, and that it's intended for a much larger space. My ceilings are 10 1/2 ft and I was only testing it at about 7 ft, so yes this light would be way to intense to use it at my displayed height for any extended length of time. Thanks for suggesting an alternate option for individuals who might be interested in something for their personal workshop area.

Yes you can plug a fire stick into this projector.

They have given me plenty of them over the last few years 😂

You should be able to turn on notifications in the settings and add your email address so that it will send you alerts.

Go to the Parent Dashboard online-> Hit the “Gear Icon ⚙️” on the main page then -> Under “Additional Content” Select “Store” then -> “Manage Notifications Settings” -> There you can select to be notified via Email, Phone, Both or “I Don’t Want To Be Notified” I hope that helps…

I am not sure that there is a cap on the number of lights that you can control within the app. The most I’ve had in the app at any one time was 4 but that’s because I only had 1 pack installed.

While I won’t argue your opinion regarding the ease of this install, I can definitively say it didn’t take 30 minutes to install. But the flush mounted aspect of this light certainly does present the most challenging part of the install. Thanks for watching and sharing.

If you go to 2:41 in this video I explain how to do rear facing using just the seat belt (no anchors)

Those are two awesome suggestions, Thank You. I was told a similar thing by someone else regarding that swing joint… and I should definitely go to a specialty store next time.

Yes but they won’t fit nearly as comfortably as the 1’s do (imo) they are a bit more snug and the arch plate in the 13’s might have a negative impact on you if you have flat feet.

Yeah my opinion has certainly changed since I recorded this… We find great value in it now. Thanks for watching!

I don’t think it was a dumb suggestion at all, I do think I would be doing myself a disservice by applying it in the opposite direction of how the sprinkler will be installed. Yeah I put on 3 full layer of wrap but it turned out that wasn’t the problem… my riser was cracked and I needed to replace it.

Also, thanks for watching and leaving a comment