วีดีโอ

Jess briley makes thin wall choke tubes that are made for all shot. Just did my 1301 berreta. Works very good

Awesome Video

I am new to reloading shot shells. I want to load duck loads 1 1/4 oz 2 3/4 and 1 3/8 oz 3" steel. I can not find any data with that speed you recommend. Can you please direct me to where I can find that kind of load data? Thank you for educating us all. Hope to hear back from you.

Can you fit external chokes to a gun that has flush mounted chokes?

Do you guys use course or fine lapping compound? I ask because I have gallons of the stuff in my workshop.

Do a video on ammo recommendations for each gauge and waterfowl type. Steel bismuth ect just like you did on the MVM podcast. Speed shot size payload ect….

You are the man Jimmy please update the compatibility charts for win choke/standard In vector/mossberg 940 weatherby element just got an auto 5 from 1987 old school want to run your choke on it I have all the other ones from crio plus Mobil invector plus you got my money as soon as I shot my Mobil choke affinity 3 decoy choke with 1300fps #4 steel and crushed a cripple at 55 yards with a rangefinder absolutely incredible

My instructions from my Clymer screw in choke tubes gives a minimum of .010 wall thickness over the .814 diameter of the 12 gauge choke tap. I never did one that thin as I felt they were dangerous. I've not done one of those in over 20 years due to the introduction of steel shot. The end of the barrel would leave with the wad. Steel shot was a game changer. I made my own choke tubes for my Browning BPS 10 ga that I got when they first came out. Faster and bigger was the only answer for steel shot and water fowl. I also made a scope mount for the BPS 10 ga and mounted a pistol scope on it for turkeys. It works well.

Mr. Muller, will you ever make a 10 gauge choke for a Browning?

Just wanted to say thank you for the great products you make..

Quick question again, retay or Benelli. In the market for a new semi automatic. Love inertia gun. Looking at the new M2, retay masai Mara, or just go with the SBE3?

I'd like to see a 2-3/4", 1-1/4oz steel load (fold crimped).

Hi Jim, been really enjoying the recent spree of short, informational shotgun videos. Concise and very helpful. I have a question for the next one: It's fairly common for different shotgun manufacturers to produce shotguns that are overbored for their nominal gauge. What are the practical differences, if any, and if so, what kind of considerations would the hunter/sportsman need to take into account when selecting loads and chokes for them?

How does it work with a Beretta 1301 tactical.

Appreciate this👍

Not sure if you put any credit into what Jack Oconner wrote in his 1964 book on shotguns, he talked with all of the major shell manufactures and game hunters. "At that time" they noticed a big difference in patterns between high and low brass. The high brass was made mostly for hunting loads with 6 pedal crimps. They didn't pattern as well. Now I know there has been advancements in plastic and wads, but the originals are still around. The powders could have changed, screw in chokes, changes in velocity etc. I personally spend a lot of time at the pattern board. Swapping chokes from lower to upper barrel changes the pattern. Same load can blow out or severely open up with just .001 difference in bore diameter. I have yet to buy your chokes, because I had already upgraded before learning of them. But every one that I shoot with that has yours love them. Some have tried a lot of chokes over the years in one gun and say yours pattern the best.

What over under for 12 ga would you prefer for sporting clays?

Great presentation. Well explained.

Thank you Jimmy for explaining.

What is your view on a benelli? I have both the A400 and the Benelli SBE3. I do pretty great with both but seems like everytime I shoot better with my benelli. Pattern both the same over and over again. The only difference I can tell is the weight of both guns. Everyone I ask says the A400 is better. Just seems like I always shoot better with the benelli. What is your thoughts?

Competition chokes for the parcours x ???

Thank you for that information helps a lot. I’m brand new to the bird game. Haven’t even patterned my shotgun yet, but I did order one of your chokes.

You nailed it Jimmy. Pattern density all day long. I patterned test my 28 bore recently with 3/4 & full chokes 21 gram lead. Well impressed with the pattern destiny considering the light payload.

I use TSS with some steel on top. Usually #9 TSS and #5 steel. 50/50 mix. it will make the TSS start to spread out at 35 yards. By 60 it's bigger than a basketball.

I know your chokes work great. I might have missed it but, what choke were you using?

I wish this covered pellet momentum (lb-ft/sec), energy (lb-ft), and energy density (lb-ft/in2) at distance (yds) for various shot sizes. Obviously there is a reason why we don't use #7 steel shot size on giant Canada geese at 40 yds, even though steel #7 shot size has more pellets than steel BB shot size pellets.

No 20 gauge Mossberg?

I ran the passing this last season and also have the ufo. Both works for me. If you can shoot on target or have your lead down they turn the lights off like a switch. No cripples. I even use the passing for dove hunting. I don’t own a decoy. I also take shots from inside the decoys and outside which I’ve hammers ducks 55yards out with the passing. I run boss ammo 3in and I’m shooting sbe2 and 3 all with his chokes! Fucking love them. And I’ve bought other chokes from Jebs,kickers, Carlson,pattern master, but my next one in the line up is my Jebs high voltage .685

Thanks, i will be buying one as soon as they are back in stock!

Thanks for the video, I was contemplating buying the ufo. I use the passing choke exclusively in my sx3 all waterfowl season shooting boss. I have the decoy choke as well, but I dont ever switch to it...

Just ordered a choke this morning before I saw this. Glad I went with the Passing and not the UFO.

I have been shooting the Muller UFO for several years now, and have found no other choke tube to even come close! The places i have to hunt, only allow for pass shooting opportunities, which means all shots are right at the 60 yard mark! I shoot nothing but high velocity steel shot loads, and with my Muller UFO choke tube, I get very uniform patterns at both 50 & 60 yards, as well as 100% patterns at each distance respectively. High velocity steel loads and Muller UFO chokes equals a LOT of ducks and geese in the freezer...

Thanks Jimmy. I can honestly say that your chokes as far as waterfowl is concerned are the best patterning I’ve used for all of my shotguns. I’ve been guiding for 20+yrs and it was amazing to smack cripples on water and in fields well beyond 50yds. I run the UFO’s in my 20ga Benelli M2 and Winchester SX3 and the patterns are unbelievable with a wide variety of shells. I run the PASSING in my SBE2 and again it is unbelievable. People are always asking “what the hell are you shooting”?! I just laugh and tell them Muller Chokes! 💪🏻

This stuff works like magic

Helpful. My U1 chokes are both tight. I'm guessing IOSSO might also work too

Hi man, I wanna buy a chokes for my sx4, when will you have them in stock. for waterfowl

I'm curious as to when you may have tubes for the Maverick 91 , Mossberg 835,935.

when are these going to be on your website?