วีดีโอ

Hi, I have the same code C1956, C1955 I have replaced the same sensor used, but the error comes when driving the car, can I get help Thanks

which model?

Ilang liters bossing ang need para diyan

Kuya, is it just as simple as remove the filter and put it back in? and just start the car? There is another video and they are saying you need to prime?

Thanks mate, this helped eliminate the same issue on my 2007 ML Triton V6 petrol. I had to replace the vacuum line you trim in the video as it was too brittle to trim and relocate.

Thank you..

Thanks so much .

Same as 80 series LandCruiser

Part number please

wet belt.. class action time...

Rim et?

You didn’t show the springs and valves being put back in before valve body

Yesterday my 2011 Outback got a blinking ATF Oil Temp, Skid warning ON, cruise control get disabled and check engine ON directly after start. (thats a vital clue) Lots of DTC:s for ABS and Transmission. Found the problem! Loose battery terminal. System voltage fell when cranking! That was the cause of it all.Cleared the codes and connected the battery properly. Now everything is fine! No parts required :)

Nissan Navara is the base for the X class Mercedes 😆🤣 suckers just driving Navara with Mercedes badge 😂😂

Ayos meg ahh! Saan ka pa aba pwede na Buksan ang new shop DAN CAR PANEL AND PAINT hehehe

Meg ako na gagawa niyan hehehe

Aba kailan lang meg prang tatangihan na ng wrecker yan ah Ngayon pwede na bilhin ng Mitsubishi yan same as new one saan ka pa sa DANCAR ka na Servicing trouble shooting all kinds of Car plus Panel and Paint pa

Yowwwwwnnn oh meg the best ka talaga mechanoc na panel and paint pa ay siya tunay

Ayos meg noted ko yan hahaha pag may maingay sa makina alam ko na agad empre ituturo ko Ang DANCAR hahahaha

Meg ganda ng place ahhh

The Best Talaga ang DANCAR everything went well

i need it

May video poba kayu Sa pag assemble ng mga gears

Kayang kaya mo yan meg

Man, this chain has oil tensioner so without oil pressure it is loose - isn't it? You should rather check how far is moved out tensioner's rod (cylinder)

( ´∀｀ )b🙀

Nice video. Can you still drill the plate if you are keeping the rest of the transmission stock? Also can you post that sheet of paper you are working off of? Thanks!

Im having the same problem on a 2011 fj cruiser north america version. I got the same 1.2 to 1.3 volts on my plug. Did changing the module fix it or was it a bad connection?

Hello i have the same car but no drive i replaced the atf and filter

Thanks for your video it fixed my problem

That's a 200 series...

What type gearbox is this and what type of fluid use for it

Kasi meron ako dto zd30 patrol d magstart dtc ckp circuit at injection pump com

Sir meron ga po ba dtc yan?

Hi Dan, I had the same problem but all Hoses connected and inspected. I replaced the solenoid and lamp switch on the front diff. 4wd seems to physically works but light constantly flashing still. Do you think it’s one of the switches ontop of the gear box? Thank you!

You're the best🎉

What the hell. Where is the how to paint. I mean it looks nice but you definitely are not showing how to do it!!! LOL

Sadly i dont understand the language, please do in English

How about showing the actual noise?

Hi I just had the same problem with my Honda CR-V 2007. Display went dark and the car would not start. Unfortunately, I was on the road so it had to be towed to the nearest service. The fuse box in my car looks a bit different from your car in the video. My question is; do I need to replace the whole board or just the fuse? We checked the fuses with the ADAC guy and they gave all positive signal.

I scan my subaru impreza error code P0420,P2764,C0045,C1160,C0071 and At oil temp light on how can i solve this?

How much to do this job mate?

Good video mate 👍

Fantastic! That light has been annoying me for months! You are a legend... Thank you! 👍😎

🤣 stupid idiots

My question is,Why you have half of the transmission out?? All you had to do is replace that one solenoid.i did it from underneath the car,drop the transmission pan after drain fluid the solenoid are number which make it easier to replace. And since I had the pan off I changed the transmission filter and add new Fluid. Took me couple hours

Avoir pressure washing / cleaning the engine bay.

Hi sir Dan Delao yung sakin naman po hindi gumagana ang 4WD indicator light, kahit naka engage ang 4WD ano po kaya ang cause nito? thank you

If the theromostat is bad would u lose cabin heat and burn up fluid?

Thanks for video