วีดีโอ

Not sure why there's so much difference between your 2009 and mine, but the positive battery terminal is a lot different. Mine has the plastic molded portion for connection of additional fuzed wires on the outside of the battery, not the top. If you have a similar set-up as mine, the 51R is not a good choice. I could not make the Interstate 51R fit, it was just too tight as the 51R is too long. I saved about $70 by using a 26R instead, but I did have to cut the battery box and I also cut some of the plastic off of the positive side battery terminal. The plastic portion where the alternator cable goes through and where the the additional wires attach on the side of the battery. if you do not cut this plastic out (for an 09 anyway), the 26R won't fit because the cable cannot be installed. I got a battery tray (plastic) from Menards for $5, and also an adjustable hold-down and new j bolts. I had to cut the battery tray, but it was easy to slim it down.

Worked for me too with an HP 8710. Just needed to ask the help of a friend PC because I can't do the process with my mac.

THE INFO YOU SUPPLY IS WORTH IT!!!

This is very helpful! My Jenn-air touch pad is too sensitive and constantly turning on by itself. I found there is an updated model for the touch pad, so going to replace it myself.

Thank you It ran coffee out now. I will be descaling on a timely basis. Thanks again.

My keeps failing when I try to do it via wifi, Will it work if the printer doesn’t have cartridges in it? I only have the 3rd party ones and I took them out to try and do the downgrade but it won’t work

Did you need a harness with a canbus decoder to do this ?

This didn't work for me. Then I smacked it 3 times with a scrub brush. Now it works.

Worked like a charm. Thanks.

There are many fc219 oil caps cheaps and expensive.. which one i have to buy.

That website doesn't give the firmware downloads anymore... I found a different site but it doesn't automatically search for printer after I unzip & open the downloaded file. How do I install the firmware downgrade now?

U have a p2025. And I'm getting higher than 12 its even reaching 18 and going higher

2017 Equinox, ~83k miles, zero oil usage until a puddle noticed this morning. Rear main seal. Shop gime charges are skyrocketing now, so estimate is $2400. I'll replace the cap next week when we get it back.

Good stuff mine wouldn't go away even when i didn't have windows highlights selected, thanks

I modified my tray but it has excess space of 3/4 of a inch but I tightened that metal bracket to the max and confident that's enough to hold the battery in place

This was a very clear video and helped immensely. Thanks alot for making this.

Wish I had heard this 1700 $ ago. Lucky we caught it before it ran out of oil.

A really helpful video. The sensor on my dishwasher was slightly different than the one shown in the video, but the instructions still worked.

What is that super cute speaker driver in the background? It looks like one of those enclosed speakers in those old ihome clocks!

Fixed my keurig ! Thanks !

Really like your energy and I hope to see you making more videos respect

RightOn, it worked! I was ready to throw this sucker out, thanks!

bad video

Thanks alot! I will never buy an HP printer again.

thank you Handy Doctor! It's never too late to teach an old dawg new tricks. I tried it out by saying supercalifragilisticexpialidocious, a word I could not spell. I can see all kinds of uses for this technology. thanks again

I am so bummed out!! I loved your enthusiasm and i had hope from listening to all the comments, but after numerous tries still doesn't work. 😢 But i will subscribe to tour channel in case i have other future repairs to make. ☺️

I want to thank you for your help. It worked. I am not very handy and was able to fix it myself. Thanks.

Can you use a head unit that requires an AUX input setting with the special NO AUX setting cable? I ask because the head unit you suggested is no longer available.

I got P2026 on my audi a6. Can i electrical tape the wires? Or do i need to solder it?

Thank you! worked like a charm, great hack to save money $$!

This was the best video I've found on the subject, and it was in fact the greasy/gunky sensor that was causing all these problems and sending the FTD/H2O error messages. My GE dishwasher is the same model, so you went through each step perfectly, and in 5 minutes I now have a working dishwasher again. Thanks!!!!

You saved me some coin. I’ve already replaced the entire motor assembly a few months ago. And since then I could not figure out why some of my dishes were not getting clean. It was this little white disk and didn’t seat correctly. Thank you.

I removed pcv line add long rubber tube reaching bottom of engine and that cap plus add seafoam to oil. It’s working well.

SPASIBO BOLSHOE FOR THE HELP :D

Huge help - super crisp and to the point- honestly I have watched about 6 different videos on this topic, and your video was the first I have reviewed that actually gives the proper solution. Many thanks!

This will not fit a 2020 Buick Encore.

Thanks Doctor !

Thank you! It worked!

please tell me. the same engine, increased gasoline consumption in the city. what could be the reason?

I'm a believer. do the needle. then plug back in. The lights are still on press power. DON'T FORGET THE CUP UNDERNEATH! thanks to @michellsmithz

Interesting solution. I have never thought to cut that piece out. What is your experience? Is it hold on? The cutting debrie won’t cause problem? How did you sealed the cut out portion? Thanks in advance for the answers!

Easiest way to fix an HP printer is to upgrade to an EPSON ECOTANK printer and NEVER look back . . . NOT worth the effort!

I am avoiding the oil catch can because of your advice. Thanks!

Thank you for posting this clip followed your advice worked perfect thanks your was about the 10th fix I attempted works perfect now

Sorry, I said it wrong in the video. The XC90 also uses a cartridge type oil filter but it does locate under the car. It's an old car, you know.

I didnt get sound

Thank you! I was desperate and this worked!!!

I just did my 2016 Honda Fit. No problem. The 51R dropped right in the battery tray. I bought the car used. So I don't know if a previous owner put in a bigger battery tray or Honda put in a bigger battery tray that year. The 51R is just about the same size as the 151R except it's a couple inches longer. You would think since the 51R easily fits Honda would have made that the OEM battery. More stores carry the 51R than the 151R. I got an Interstate 51R at Costco for $123.99 plus tax and $15.00 core charge.

Thank you so much! Was using some old speakers from the 90’s that weren’t labeled.

Great video! Your teaching worked!! I'm so thankful you made this video available to the public. Thank you again.