KB Auto Project
KB Auto Project
  • 24
  • 91 001
It's been awhile. But we're back!
It has been about 3 years since our last upload. And we apologize. But we are going to start uploading again. Slowly but surely! We will be uploading some non car related content along with car related content in the future!
Follow our Instagram's
kuemperkevin
brandonvanderpool
มุมมอง: 75

วีดีโอ

CUSTOM FLOWMASTER Axle Back Exhaust On My BMW F30 328i
มุมมอง 3.3K3 ปีที่แล้ว
Tired of all the straight piped F30's? Me too. This here is something new, something different, something....well okay maybe it's not new or that different. But it's cheap! Now if you're like me and can't cut a bumper to save your life than I would probably take it in to a shop and have them cut your exits. Flowmaster also offers a variety of mufflers that could work with your car, so the super...
FINALLY Black Reflectors for the rear bumper on a BMW F30
มุมมอง 13K4 ปีที่แล้ว
After a year of saying we were going to put these in, it's finally here. Black reflectors for the rear bumper on a 2015 BMW 328i xDrive. The products I used in the video can be found here: www.amazon.com/gp/product/B01L8GHB7O/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1 www.amazon.com/gp/product/B07D857LMW/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 Keep up with us and our channel on s...
BMW F30 Brake Handle Install In 7 Minutes
มุมมอง 1.2K4 ปีที่แล้ว
Simple E-brake handle install video on my BMW F30 328i. Yeah I actually bought a quality part from Ebay and it's cheap too. You want one? Here's a link: www.ebay.com/itm/Aluminum-Handbrake-Brake-Handle-Cover-fit-BMW-X1-E90-E91-F30-F31-3-Series-Black/223180671493?ssPageName=STRK:MEBIDX:IT&_trksid=p2060353.m2749.l2649 Don't forget to follow us on social media! Our instagram: kuemper...
VRSF Catless Downpipe For The 328i F30
มุมมอง 42K4 ปีที่แล้ว
It's finally here, the catless downpipe upgrade for my 2015 BMW 328i xDrive. Huge thanks to VRSF & Extreme Power House for making this video and upgrade possible. Here is the link for where I got my downpipe: x-ph.com/vrsf-catless-downpipe-2012-bmw-n20-120i-128i-228i-320i-328i-428i-f20-f21-f22-f30-f32-f33/ ALSO, huge thanks to McCords Auto Service in Spencer, IA for letting us use the shop to m...
BMW N20 spark plug change for the F30
มุมมอง 5K4 ปีที่แล้ว
In this video we change out the spark plugs in a 2015 bmw 328i xDrive in the comfort of my very messy garage. Again we are very SORRY for the bad auto focus in this video, we know it's annoying. A quick thank you and shout out to Burger Motorsports for making this spark plug change possible :) Follow us on social media! Instagram: kuemperkevin brandonvanderpool Twi...
Side Mirror Replacement & M Sport Wheel Overview
มุมมอง 1284 ปีที่แล้ว
Just want to start out by saying sorry in advance for the terrible auto focus in this video. We are still adjusting to using the new camera and you might see this in the next couple videos as well. In this video we do a side mirror replacement in our 2015 bmw 328i xDrive and go over how to install an M sport wheel with a different take on removing your old wheel. Sorry, no links for parts in th...
BMW Bootmod3 Stage 1 & Launch Control
มุมมอง 9K4 ปีที่แล้ว
In this video we have put Bootmod3 stage 1 on my 2015 bmw 328i xdrive and we try out launch control too! You can follow us on social media like: Instagram - kuemperkevin brandonvanderpool Twitter - KBAutoProject1 Link for where we bought Bootmod3: www.kiesmotorsports.com/collections/f30/products/protuningfreaks-bootmod3-n55-n20-n26-beta Big thanks to Ki...
New spark plugs, shift bushing and shift stop for the Subaru WRX
มุมมอง 1234 ปีที่แล้ว
Today we do a triple install! A bushing for the transmission that tightens the throw, a stop shift bracket for shifting and new spark plugs for the Subaru. Thanks again to McCord's Auto Service for making this video possible! Links to the products shown in our video: www.subispeed.com/perrin-ligh... www.subispeed.com/subaru-oem-... Follow us on social media! Twitter: KBAutoProject1 ...
CTS Oil Cap Install & Review
มุมมอง 2744 ปีที่แล้ว
Huge thanks to McCord's Auto Service in Spencer for helping us out with this video and letting us use the shop and film there. In this video we install a CTS oil cap for the BMW 328i xDrive as an upgrade to the oem oil cap. The CTS oil cap is suppose to provide a longer life span compared to the oem as it is a aluminum part and also provides better cooling for the oil through heat fins. Want on...
2017 Subaru WRX Mishimoto Intake (this took longer than we thought)
มุมมอง 3024 ปีที่แล้ว
Huge shout out to McCord's Auto Service in Spencer, IA for helping us out with the shop and tools! In this video we install a Mishimoto intake on Brandon's 2017 Subaru WRX Link for the product featured in the video here: www.subispeed.com/mishimoto-performance-air-intake-system-2015-wrx?gclid=CjwKCAiA0svwBRBhEiwAHqKjFuHy7 ldnst6iVnJ-x0q7zUdvC3Ry9W0mfPJagy3017c27EAl0QyBoCcjEQAvD_BwE#.XhMn9EdKiUk...
2017 Subaru WRX Perrin Turbo Sump Restrictor
มุมมอง 1.6K4 ปีที่แล้ว
We install a Perrin Turbo Sump Restrictor on Brandon's 2017 Subaru WRX. We are installing this part to help eliminate a lot of the black smoke that is coming from his car and turning his exhaust tips black. Link to the part featured in the video here: www.subispeed.com/perrin-turbo-sump-restrictor-15-18-wrx-14-18-forester-xt#.XeeyGOhKiUk Follow Us Right HERE Instagram kuemperkevin...
Mishimoto Baffled Catch Can Install!
มุมมอง 3894 ปีที่แล้ว
In this video we install a Mishimoto baffled oil catch can in a 2015 bmw 328i xdrive. Link to Mishimoto Oil Catch Can for N20/N26 www.mishimoto.com/bmw-n20-n26-baffled-catch-can-2012.html Follow Us! Twitter - KBAutoProject1 Instagram - kuemperkevin brandonvanderpool Video Tracks Controlled Distress - Biz Baz Studio Thanks for watching KB Auto Project!
Our BMW Driving Experience
มุมมอง 704 ปีที่แล้ว
We took a trip to Shakopee, MN to take part in the ultimate bmw driving experience event. Unfortunately we were unable to get a good amount of footage for the autocross event but we hope you still enjoy the video! Twitter - KBAutoProject1 Instagram - kuemperkevin brandonvanderpool Thanks for watching!
WRX Handbrake Handle & Button in 5 minutes
มุมมอง 1.2K4 ปีที่แล้ว
We install a new e-brake or handbrake handle and button on the Subaru WRX
BMW Angel Eyes & Reflectors!
มุมมอง 1224 ปีที่แล้ว
BMW Angel Eyes & Reflectors!
New Subaru Parts! Shift Trim and Rain Guards
มุมมอง 734 ปีที่แล้ว
New Subaru Parts! Shift Trim and Rain Guards
The BMW is almost at 100,000 miles, is that a bad thing?
มุมมอง 844 ปีที่แล้ว
The BMW is almost at 100,000 miles, is that a bad thing?
BMW F30 MST Inlet Install!
มุมมอง 8804 ปีที่แล้ว
BMW F30 MST Inlet Install!
GFB Diverter Valve Install! BMW 328i xDrive
มุมมอง 10K5 ปีที่แล้ว
GFB Diverter Valve Install! BMW 328i xDrive
Anthony learns how to drive the WRX
มุมมอง 1965 ปีที่แล้ว
Anthony learns how to drive the WRX
Des Moines cars and coffee!
มุมมอง 5765 ปีที่แล้ว
Des Moines cars and coffee!
Brandon's trip to Colorado!
มุมมอง 905 ปีที่แล้ว
Brandon's trip to Colorado!
First Outlook F30 328i Subaru WRX!
มุมมอง 3785 ปีที่แล้ว
First Outlook F30 328i Subaru WRX!

ความคิดเห็น

  • @stormwilliams5980
    @stormwilliams5980 5 วันที่ผ่านมา

    what all will you need for a stage 2 tune with this?

    • @kbautoproject
      @kbautoproject 5 วันที่ผ่านมา

      A higher flow air filter or cold air intake (I recommend using an upgraded filter and keeping the oem box) the catless downpipe and an upgraded front mount intercooler. You will need an off the shelf stage 2 tune from bootmode, best bet is a 91 octane tune.

  • @larrygill2223
    @larrygill2223 3 หลายเดือนก่อน

    Would it be easier taping up everything with newspaper/tape and just spray painting them gloss black?

    • @kbautoproject
      @kbautoproject 3 หลายเดือนก่อน

      You could, but I’d be careful about over spray

  • @boost3D55
    @boost3D55 4 หลายเดือนก่อน

    Wow thank you so much for making this video could not find another video with this amount of detail i think everyone else had a n26 because of how their downpipe looked like 👍 you guys are G's

  • @328iJones
    @328iJones 5 หลายเดือนก่อน

    Did you use west tuned

    • @kbautoproject
      @kbautoproject 5 หลายเดือนก่อน

      No, just bootmode

  • @jimbojellybop5752
    @jimbojellybop5752 6 หลายเดือนก่อน

    Were these depo. Or another company ?

    • @kbautoproject
      @kbautoproject 6 หลายเดือนก่อน

      JDM Toy off Amazon, I’m sure there are a lot of other companies that make the same thing.

    • @jimbojellybop5752
      @jimbojellybop5752 5 หลายเดือนก่อน

      @@kbautoproject purchased said depo reflectors, no complaints with fitment as they look great. Install took only a couple minutes. Highly recommend.

  • @davinbradley7721
    @davinbradley7721 7 หลายเดือนก่อน

    How do you remove the cat from the downpipe? Should I remove the exhaust hanger?

    • @kbautoproject
      @kbautoproject 6 หลายเดือนก่อน

      Once the downpipe is unbolted and the V clamp is removed it should slip off from the rest of the exhaust.

  • @Akac3sh
    @Akac3sh 8 หลายเดือนก่อน

    hell yeah !!

  • @jeremystudebaker2630
    @jeremystudebaker2630 9 หลายเดือนก่อน

    Welcome back. Great to see you guys back having fun.

  • @nikonlowful
    @nikonlowful 9 หลายเดือนก่อน

    So excited to see what you guys do to the cars. Glad to see you guys back to doing what you love

  • @aliatwi6199
    @aliatwi6199 9 หลายเดือนก่อน

    Is this a resonator the small circle one that it is attached to the downpipe?

    • @kbautoproject
      @kbautoproject 9 หลายเดือนก่อน

      The resonator is behind the catalytic converter, a round longer piece resembling a muffler.

    • @aliatwi6199
      @aliatwi6199 9 หลายเดือนก่อน

      @@kbautoproject if we delete flexpipe does car make louder noise?

    • @kbautoproject
      @kbautoproject 9 หลายเดือนก่อน

      Technically yes, as the flex pipe is most likely connected to the catalytic converter.

    • @aliatwi6199
      @aliatwi6199 9 หลายเดือนก่อน

      @@kbautoprojectbut it is notecebale ?

    • @kbautoproject
      @kbautoproject 9 หลายเดือนก่อน

      Not really to be honest

  • @seanybravo69
    @seanybravo69 11 หลายเดือนก่อน

    Do you have to tune when installing catless downpipe or can I keep it stock tune

    • @kbautoproject
      @kbautoproject 8 หลายเดือนก่อน

      I recommend a tune, you could go without but you will have a check engine light and may not get the results you really want out of it.

  • @GALAXYWORLDLED
    @GALAXYWORLDLED ปีที่แล้ว

    How much hp does it add

    • @kbautoproject
      @kbautoproject ปีที่แล้ว

      Not sure to be completely honest 🤷

  • @Oakleyicon
    @Oakleyicon ปีที่แล้ว

    Before removal tape the area around the reflector.....especially where you'll pry against the bumper cover with the trim tool!

  • @tgshark1
    @tgshark1 ปีที่แล้ว

    Pop them off cut the opening space and put aluminum mesh

  • @Dazza367
    @Dazza367 ปีที่แล้ว

    Great video and explanation of the install process and what to expect. Very much appreciate your honesty with the level of difficulty required to install as it helps me prepare for my install. Well done.

  • @MrVuittonDon
    @MrVuittonDon ปีที่แล้ว

    How can I remove the check engine light regarding the downpipe/custom exhuast fabrications? Is there a way to remove the codding ONLY for the exhuast part and not the check engine entirely? Is there a sensory cap I cam plug in to trick the system? PLEASE HELP 🙏🏼🙈

    • @kbautoproject
      @kbautoproject ปีที่แล้ว

      Are you using bootmod3 as a tuner? Bootmod3 can turn off the CEL for the cat removing that fault code from the start.

    • @MrVuittonDon
      @MrVuittonDon ปีที่แล้ว

      @@kbautoproject I am not a turner. I figure to use ine of these flash tunes since I don't truly need a standalone ecu it only a b46. DL you recommend BootMod3 over other brands such as JB4 OR MHD?

    • @kbautoproject
      @kbautoproject ปีที่แล้ว

      I do recommend bootmod3 over those, yes bootmod3 is more expensive but the ability to have a direct way to turn of your CEL and the many different maps you can use depending on what you want for a tune makes up that difference. Plus you get a built in code reader for any other fault codes you may have. There are other coding options you can find that may turn off those faults caused by a custom exhaust system but they won't give you the same performance benefits you get from bootmod3.

  • @MrVuittonDon
    @MrVuittonDon ปีที่แล้ว

    Did you buy any additional parts besides just the pipe for this installation?

    • @kbautoproject
      @kbautoproject ปีที่แล้ว

      That's a great question, the only other parts we bought besides the downpipe was the gaskets for the V-band clamp and a new V-band clamp as well.

  • @mannifigueroa8701
    @mannifigueroa8701 ปีที่แล้ว

    I have the AWE Axle Back Exhaust, sounds great. I'm planning on BM3 and the VRSF Downpipe. But I'm reading some faults with BM3 and cars not turning on, any issues on your end the first time using BM3?

    • @kbautoproject
      @kbautoproject ปีที่แล้ว

      I had no problems whatsoever with mine, I trust bm3

    • @mannifigueroa8701
      @mannifigueroa8701 ปีที่แล้ว

      @@kbautoproject I figured problems are few and far between, but appreciate the response none the less!

    • @kbautoproject
      @kbautoproject ปีที่แล้ว

      Not a problem, happy to help!

    • @carsonteeter302
      @carsonteeter302 ปีที่แล้ว

      Hey did you end up doing catless downpipe? If so can you send me videos I have the same exhaust and want it a little louder what do you think?

    • @carsonteeter302
      @carsonteeter302 ปีที่แล้ว

      @@mannifigueroa8701 thank you I’ll check it out in a few minutes how do you like it? And any reliability issues so far?

  • @thinbluelinesoldier1972
    @thinbluelinesoldier1972 ปีที่แล้ว

    Bro. Where have u been. 😕 got anymore videos of your projects.

    • @kbautoproject
      @kbautoproject ปีที่แล้ว

      Sadly not right now, I was in a motorcycle accident and have been in recovery. Hopefully will have an update video soon.

    • @thinbluelinesoldier1972
      @thinbluelinesoldier1972 ปีที่แล้ว

      @@kbautoproject have u in my prayers 🙏 brother 💯.

    • @kbautoproject
      @kbautoproject ปีที่แล้ว

      Thanks!

    • @thinbluelinesoldier1972
      @thinbluelinesoldier1972 ปีที่แล้ว

      @@kbautoproject what happened 😳 brother. Are you going to be ok after physical therapy.

    • @kbautoproject
      @kbautoproject ปีที่แล้ว

      I wrecked my 2001 R1 and basically tore my right hand off with some other injuries as well. But I'm almost done with the healing process.

  • @victorsmith5671
    @victorsmith5671 ปีที่แล้ว

    T27 come in on and angle

  • @andrewdiaz4670
    @andrewdiaz4670 ปีที่แล้ว

    I’ve been waiting to do this but as I watched again I feel I heard a fart in the distance Please tell me there’s no fart 😩

    • @kbautoproject
      @kbautoproject ปีที่แล้ว

      Lol, fart? The burple? 😂

    • @andrewdiaz4670
      @andrewdiaz4670 ปีที่แล้ว

      @@kbautoproject so when you do a muffler delete when you shifting you get the fart on the n20 engine N that’s what I don’t want I know burbles are there but idk do you happen to have a picture of underneath the car I may copy this set up 🫣

    • @andrewdiaz4670
      @andrewdiaz4670 ปีที่แล้ว

      While shifting

    • @kbautoproject
      @kbautoproject ปีที่แล้ว

      You have to remember that I technically still have a muffler it's just not the stock muffler. Also, if you're already using bootmod3 then you can already turn off all burples in your settings too. I believe I have pictures on my Instagram.

    • @sickly0
      @sickly0 6 หลายเดือนก่อน

      @@andrewdiaz4670 when you shift in manual mode let go of the gas while its shifting then step on it again you wont get the fart gang

  • @onelastmod
    @onelastmod ปีที่แล้ว

    Awesome video man. I just removed mine, sandpapered them a little and spray painted it black. Hard to find them otherwise in Malaysia

    • @kbautoproject
      @kbautoproject ปีที่แล้ว

      Nice, keep on modding man!

  • @Mr04hayabusa
    @Mr04hayabusa 2 ปีที่แล้ว

    Thanks for the video .. I’m just waiting on mine set to come in from Amazon

  • @delfinek171
    @delfinek171 2 ปีที่แล้ว

    Do you know what happened with your BMW after crash?

    • @kbautoproject
      @kbautoproject 2 ปีที่แล้ว

      I do actually, it was sold on iaa to a guy in Poland who had it shipped there and fixed it up.

  • @SlumptDrew
    @SlumptDrew 2 ปีที่แล้ว

    Drone ?

    • @kbautoproject
      @kbautoproject 2 ปีที่แล้ว

      No, just had a simple tripod setup.

  • @ruufiss9922
    @ruufiss9922 2 ปีที่แล้ว

    Kies makes it look so easy

    • @kbautoproject
      @kbautoproject 2 ปีที่แล้ว

      Yes, yes he did, although he had the correct tools and more experience.

  • @real_lfe_real_sht714
    @real_lfe_real_sht714 2 ปีที่แล้ว

    I hope you removed the muffler

  • @superdeezeuro7400
    @superdeezeuro7400 2 ปีที่แล้ว

    Hey bro where can I get the cutout for the tip on the right side of the bumper. The stencle cutout

    • @kbautoproject
      @kbautoproject 2 ปีที่แล้ว

      Check out AWE's website, also there is a difference between getting one for an M sport bumper and non-M sport so make sure it's the right one for your car!

  • @superdeezeuro7400
    @superdeezeuro7400 2 ปีที่แล้ว

    Good job bro! Il do the same setup on my 328i

  • @ziBloodLite
    @ziBloodLite 2 ปีที่แล้ว

    do i need bootmod if i do the euro button swap? i don’t want a cel

    • @kbautoproject
      @kbautoproject 2 ปีที่แล้ว

      I'm sorry I'm confused by what you said, what is a euro button swap?

  • @longebane
    @longebane 2 ปีที่แล้ว

    Think it looks a bit too gaudy/try-hard. Like it would be sold in a set with a tow hook

  • @rolanmanaois3749
    @rolanmanaois3749 2 ปีที่แล้ว

    thank you man

  • @tylerdelong123
    @tylerdelong123 2 ปีที่แล้ว

    crazy thing, I own this car now

  • @franciscosoto8816
    @franciscosoto8816 2 ปีที่แล้ว

    Hey bro if you don’t like it you can send that downpipe my way lol

  • @harveys.2821
    @harveys.2821 2 ปีที่แล้ว

    Is it necessary to put the main piston spring I'm just trying to avoid any ECU codes

    • @kbautoproject
      @kbautoproject 2 ปีที่แล้ว

      You can use the stock spring if you want, either way you won't throw any codes.

  • @2maczmabgod86
    @2maczmabgod86 2 ปีที่แล้ว

    Best way to hear it it is feather the gas then let go of the gas

  • @thinbluelinesoldier1972
    @thinbluelinesoldier1972 2 ปีที่แล้ว

    Do you have an email where i can reach you. Im about to get my quads put on in a few days. Its crazy but im a retired Police Officer almost 50 and i enjoy driving these BMW's. Just wanted to pick your brain please thanks

    • @kbautoproject
      @kbautoproject 2 ปีที่แล้ว

      You can reach us at kbautoproject@gmail.com 😏

  • @thinbluelinesoldier1972
    @thinbluelinesoldier1972 2 ปีที่แล้ว

    Thanks for the video my brother. I have a 2016 328xi almost at 100,000 Miles and she drives beautiful. Please continue to make these videos they're very helpful.

    • @kbautoproject
      @kbautoproject 2 ปีที่แล้ว

      Thank you 😁 we are working on new content but we still need a new editing laptop to get things moving

  • @thinbluelinesoldier1972
    @thinbluelinesoldier1972 2 ปีที่แล้ว

    The car looks and sounds great. Do the make a flowmaster super 10 with 3inch inlet and outlet. I just got my car same as yours out the bodyshop with both sides cut out and ready to install the quad 3inch matte black tips. Not tuned yet but going to soon. Can u give me some advise? Thanks brother

    • @kbautoproject
      @kbautoproject 2 ปีที่แล้ว

      Thank you! You can check out Flowmaster's website and see if they have a 3 inch inlet and outlet for the super 10 but I'm pretty dang sure they do! Be careful with your tips, as I realized that mine which were apparently powder coated, chipped. If you are looking for as loud as possible, delete your resonator. Even with a catless downpipe my setup was pretty mild.

    • @thinbluelinesoldier1972
      @thinbluelinesoldier1972 2 ปีที่แล้ว

      @@kbautoproject thank you for the information my brother. I came across your vids about a few weeks ago and was inspired by your journey that im on my own now. Hoping to get 2004 M3 E36 as a project vehicle.

  • @wingedhussar5528
    @wingedhussar5528 2 ปีที่แล้ว

    Those gauges are not accurate. I have stage 1 in my 19 F32 440xi.. Gauges show 500hp and 550lb-ft, which is obviously way above stage 1 numbers, since my actual dyno after tune was 386whp and 410lb-ft tq. When flooring it hp and torque gauges go way above 400.

    • @kbautoproject
      @kbautoproject 2 ปีที่แล้ว

      Yeah, we are aware the butt dyno isn't accurate but it's still fun to see an increase in power 😀

  • @prevaloir5362
    @prevaloir5362 2 ปีที่แล้ว

    I couldn't find these black reflectors. So I ripped my OEM ones off, which for me was a pain in the ass. Then I wrapped them in gloss black vinyl. They look complete the blacked out look. Great tutorial!

    • @kbautoproject
      @kbautoproject 2 ปีที่แล้ว

      Nice! That's probably a better idea than buying the ones I bought

  • @2026820
    @2026820 2 ปีที่แล้ว

    Link is dead got another one so u can buy ?

    • @kbautoproject
      @kbautoproject 2 ปีที่แล้ว

      I can't find any more like this, they may have been discontinued

  • @goaliefreak2943
    @goaliefreak2943 2 ปีที่แล้ว

    Straight cringe 😬

  • @P44TKO
    @P44TKO 3 ปีที่แล้ว

    How is it on motorway ???? Thinking getting downpipe on mine 125i but worried its going to droun ?

    • @kbautoproject
      @kbautoproject 3 ปีที่แล้ว

      With just the downpipe you're not going to notice any difference from stock to be honest. On the highway it's going to sound the same as stock practically. I even went from the stock muffler to a Flowmaster super 10 and there still wasn't really any drone at high speeds being paired with the downpipe.

    • @P44TKO
      @P44TKO 3 ปีที่แล้ว

      @@kbautoproject i am at the moment resonator delete with m135i backbox which I had modified from inside wld that make it drone ???

    • @kbautoproject
      @kbautoproject 3 ปีที่แล้ว

      Can't say for certain to be honest

  • @cashdylan1111
    @cashdylan1111 3 ปีที่แล้ว

    Is this the only mod you have to give you that exhaust sound because I’m looking to do this on my 320i

    • @kbautoproject
      @kbautoproject 3 ปีที่แล้ว

      At the time of this video, yes it was my only exhaust mod.

  • @bicccboi
    @bicccboi 3 ปีที่แล้ว

    why would you put glue on there, now you can never take it out without damaging the reflectors and possibly the car paint. maybe 3m tape would be better

    • @kbautoproject
      @kbautoproject 3 ปีที่แล้ว

      Well to be honest I never had any intention of them ever coming off again. Secondly, I wasn't even sure I would be keeping that bumper because I was wanting to swap in an M sport bumper, so it didn't really matter 🤷‍♂️

    • @robcme77
      @robcme77 2 ปีที่แล้ว

      I have the m sport bumper, did you get yours yet?? Do you think these will work for the m-sport bumperr??..I need these red reflectors off lol..!!!

    • @kbautoproject
      @kbautoproject 2 ปีที่แล้ว

      No these won't work for the M sport bumper, those are slightly different I'm afraid but I feel ya lol

  • @aidananchaya
    @aidananchaya 3 ปีที่แล้ว

    I want to do this but it probably wouldn’t pass emissions

    • @kbautoproject
      @kbautoproject 3 ปีที่แล้ว

      No it most certainly wouldn't

  • @andrewp245
    @andrewp245 3 ปีที่แล้ว

    That lot was so empty compared to now

  • @scottfriesner1538
    @scottfriesner1538 3 ปีที่แล้ว

    Nice Video, Just purchased for my BMW 428i Gran Coupe!

  • @alonso-tf3hi
    @alonso-tf3hi 3 ปีที่แล้ว

    can you make a video bottom left exhaust tip i wanna see how it fits