วีดีโอ

@@jasondunn8313 I think it's hard to seal it with a gasket since water will come in at the pogo pinns. But this gel is a solution for sure.

@@aramaa4905 I have noticed that it sometimes don't charge so I have to move the connection a little. I'm thinking of doing a permanent connection instead, either by soldering the wires or schrink wrap it.

Thank you.

Yes, that protects the pinns from oxidation but it also collects dust, sand and debris when riding gravel or off-road in dry climate. I prefer what I have now since it's a dry solution.

Tack så mycket. 390'n är Adv modellen. Den hänger med bra och tror inte det finns något att klaga på.

Hi, Yes, I have had zero problems despite a lot of rain 🌧️

Hej, Fästet kommer från 3D Moto www.3dmoto.pl/product/yamaha-t700-shakes-gone-fairing-brace-nav-mount-platform-(2019-2022) Själva Ram-Mount hållaren är från Monteringsbutiken www.monteringsbutiken.se/product/ram-ez-rollr-powered-cradle-for-samsung-tab-active3-and-tab-active2/

Hi, I created the route my self. A tip is to watch TH-cam videos and write down all nice places you want to visit and then try to connect them via smaller roads.

Thx

,Hmm you mean that the charging voltage should go down? No, nothing I have noticed. I think the charging is on the slow side even if I use the 220v socket in my house. I'm pretty sure that the USB converter from 12v get enough power to meet the USB standard, but I have not measured it.

Thank you! I use a mount from 3D Moto. www.3dmoto.pl/product/yamaha-t700-shakes-gone-fairing-brace-nav-mount-platform-(2019-2022)

⁠@@RiflemanSE did you mount it directly to the 3D MOTO holder? Or do you need any adapter to place the tablet holder to the center? Thank you

@@baktermk1tdi Hi, the Ram Mount holder for the pad is mounted directly to the 3D Moto mount.

Tack! Ja ljudet lämnar endel att önska. Pga vädret fick jag använda extern / intern mikrofon vilka ger olika ljud.

It has worked great, no problems at all. 😃

Yes, but esthetics has its part to 😄 Actually I have plans to try that but not for that cause.

Hi, No, but it sounds like it would work. I have tried the ACF 50 only. So far they work.

Well I tried your solution with the gel but for me it was not successful. For months I suffered inconsistent connection and slow charging. I am using this on my Tuareg 660. I ended up just plugging the tablet directly into Aprilias supplied usb port and it now works consistently every time with a strong charge rate. I also learned to use the adjustable display setting instead of manual mode set to max brightness. Apparently the adjustable mode can go 20% brighter I have read.

Yes, very well

Ja det var en fantastisk utsikt där uppe 😃

Tack så mycket! Ja det var en bra resa men lite otur med vädret några dagar.

@@RiflemanSE Hvis været var stabilt bra, ville det trolig være vanskelig å kjøre i Norge. Det ville trolig være for mye trafikk på de smale og svingete veiene

That's a place i to would like to visit. 🙂

@@RiflemanSE i think i will in August driving

No not at all

Thank you! Mine still works good after a terribly rainy summer.

@@RiflemanSE Thanks. Good news

Thank you! We try to keep a days ride under 300km since we want to have time to stay and see things along the way. We usually make one stop for food during the ride but we try to drink something often. If weather are good we sometimes use sheep skin on the saddle, both for comfort but also for added airflow. Of course it works for warmth during cold days also. A good nights sleep are important to.

Hi, Yes I’m very happy with it. We recently did a 1900km journey in Norway (see our latest movie) where we had a LOT of rain and it performed flawlessly. It charges a bit slow but has always done and I think it has to do with the Micro USB connection (tablet holder has a short wire with Micro usb in the end and then it’s hooked up with a longer cable that is ordinary usb in the other end. Tablet holder comes with this solution as stock so it’s nothing I have done)

Thanks! That's good to know for sure. I have several places with charging ports to experiment with on my bike. I will try a few of them. I actually have had similar charging problems by the way. My Quadlock USB A charger was actually discharging my phone half the time. I have since gotten a better charger.

Tack så mycket, roligt att du gillade den 🙂

Å här å där nån enstaka hytte. Normennen vill gärna ha det lite fritt. Känner igen endel vägar. Å får!

Hi, The mount is this from 3D moto. www.3dmoto.pl/Yamaha_T700_SHAKES_GONE_Fairing_Brace_Nav_Mount_Platform_(2019-2022)/p6718994_21164618.aspx And the holder is from Ram Mount, there is a video of it on our channel where I do some modifications for water protection.

I have just tested it in poring rain for 4 days in Norway and can confirm that the electronics still works 👍🏻

Absolutely, I’m on a trip right now but I’ll do it in the coming weeks.

@@RiflemanSE gracias

Hi, It’s connected to the 12v outlet via a USB adapter

@@RiflemanSE thanks for the answer - I hope I understood correctly. You come from the battery with 12 V to the USB plug - from the USB plug to the tablet also with 12V?

@@fiordilatte4118 I use the stock 12v outlet that’s to the left of the speedometer on the bike. In that I use a USB converter that I connects the usb cable that comes with the cradle for the pad.

Thank you! These come from Adventure Spec in UK.

@@RiflemanSE thank you!

Thank you! I have the ALTRider tail tidy. More pictures of it can be seen on instagram.com/trailandroadadventure

@@RiflemanSE where can i buy this

@@AdventureWR Just search for it, ALTRider has some resellers online.

@@RiflemanSE sorry, didn’t see the first the part

@@AdventureWR No problem 😃

Yes that is possible but I think it’s just fine as I have it now actually.

@@RiflemanSE would you still recommend the holder?

@@MrRclemens Yes, so far no problems with the charging. I have washed the bike with the holder attached and really drenched it and so far so good.

Spring is really late this year in Sweden so I haven’t had the chance to test it much but it seems like it handles all my navigation apps great so far.

@@RiflemanSE Same for Norway, still cold! I was thinking of screen brightness. Cant affaod the Tab3 🙂

@@no66 I will check that and reply to you asap 👍🏻

@@no66 I have now tried out in the sun, the brightness on its highest setting is about the same as on my Garmin Montana 700i. No problem reading a map but it would not have hurt to be just a tad brighter. For the money I think it’s totally fine.

@@RiflemanSE Thanks for the update. I have one coming soon and going to print a holder this weekend

I use a mount from 3D Moto for attaching the RAM holder to the bike. www.3dmoto.pl/details/p6718994_21164618.aspx

@@RiflemanSE thank you so much for your answer. They even have one for the world raid!

@@ZX-6R You’re welcome 😃

Hi, I haven’t had the chance to ride with it yet, we have -18 degrees celsius at the moment and a lot of snow. I will post an update as soon as I know 👍🏻

@@RiflemanSE Ha Ha should of realised “Sweden” thanks for the reply will look forward to seeing if this solution works out. I’m using a large rugged phone at the moment and looking into a slightly larger display with a more secure mount which has been the main issue for me while riding tracks 👍🏻

I hope you got a good solution done and have had a good seaso riding, i had totaly missed your reply.

but good ideia anyway

Yes the spring tension sure could be a little stronger in them. I have seen online that it is possible to buy other pogo pins, maybe it will be a winter project and change them, or just run a separate cable if it gives up. But at least it’s now weather protected.

@@RiflemanSE I've installed a second USB -C cable soldered to the circuit board. This way I have 2 different charging entry's to the tablet. Haven't tested it properly but the tablet charges at 1400ma

@@RiflemanSE could you send the link to the different pogo pins?

@@PIREX701 I just did a search for pogo pins and got several resellers/ manufacturers, there are even watertight ones. But changing them might be a job for some one who are good at soldering small things 😁

Not good, unfortunately, Mivv agrees that the system is correctly mounted and is as it should be, and is not defective , therefore they will not send a new link pipe, neither do the reseller wrs.it. On the other hand Mivv states in the manual that the gap from any thing that can be damaged by heat should be 20mm, but in some strange way it’s ok with 2mm from the rubber part on the swing arm. I have heard from some resellers before that Mivv is not service minded at all and I can fully agree. Neither are WRS.it who understands my concerns but can’t act on their own and send a new link pipe to try with, they only reroute my emails to Mivv and refers to what Mivv says. I could return everything but only if the engine newer had been started with it, which it has. More about it here www.tenere700.net/topic/6037-mivv-dakar-slip-on-problems/#comment-68787

@@RiflemanSE I just ordered a Mivv Dakar black for my T7. If I have an issue I'll make a video about it.

@@RiflemanSE mine in route from Italy dealer. I bought the whole kit including the headers and carbon fiber protectors. Will see once they arrived and I able to install em. 🤞🏼 for non issue, I cannot simply afford if it does. 😬

@@baksi07 Nice! I bet it will fit better with their own manifold.

Now I’m not sure about buying this exhaust! That must hit the swing arm if you jump the bike?

True, I have the ALTRider tail tidy

Hi, I have the ALTRider tail tidy which moves the indicators up higher, the Mivv Dakar is not compatible with the stock placement of the indicators. The bike is a 2022 Rally.

My Bikes is Euro 5 but the Mivv Dakar is approved for both 4 and 5.

Thanks! It’s an ALTRider tail tidy. I can highly recommend it, easy install and there is a very good installation video here on TH-cam with all the torque values etc.

Yes I think it looks way better with the high mount. The only concern I have is the tight space between the swing arm and the pipe, barely 2mm. The reseller will contact Mivv for advice.

@@RiflemanSE any update on this one? I had the same issue with my HP Corse SP1 high mounted exhaust and I removed it for this reason. It was touching the swing arm on full stretch of the suspension. Thanks

@@georgedimou2223 Hi, Unfortunately not, @Mivv are taking a very long time deciding what to do. WRS are handling it and I hope to get a solution soon.

Mivv agrees it’s tight but it’s right mounted, but will not change the link pipe for me. Lousy service from Mivv in my opinion.

So you had to keep it that way? Isn’t it touching the swingarm at all? If mine arrives and looks like that, I’ll send it back for sure… that’s way to close imo

Tack 😃 Ja det vet en fin resa, hoppas på något liknande till sommaren igen.

Tack, ja det var riktigt fint. Det fick bli musik då vindbrus är nått av det värsta jag vet på mc filmer, om du provat att filma med en GoPro kamera utan extern mikrofon med ngn typ av vindskydd så vet du hur illa det blir. Vi valde att lägga pengarna på själva resan istället för kamera prylar då filmandet inte var huvudsyftet 🙂