วีดีโอ

Holly sh I think you found my issue once I get back home ill try it and update you

This video showed us absolutely NOTHING. Thanks for wasting our time.

The diamond wheel are for the carbide chain don't confuse the two

G'day Mate, What brand of CBN grinding wheel did you get?? Cheers Mate!

What is your boat setup? Length and width, what kit, what size motor and how fast does it go? I have been looking all over and everyone has different setups and speeds

So you didn’t water it? I really want to try this. I saw someone else that did it as well and realized that it could be used as grass 🤷‍♀️

You should always give and maintain a little reverse tension against the locating cleat before and during the action of locking the rail.

Just wait til you gotta touch up the edge. I can field strip and clean an sks faster than I could disassemble, sharpen, and I still don't have them back together. The tension on the sting in there is insane (stronger than the gas piston spring in my rifle) and now the laser sharp edge I put on them is no on the end of what you gotta push that spring back into. If I have all my fingers left when I'm done, I'll let ya know if it's worth sharpening or just buying a new pair.

Just seeing this now. I have the same model but not titanium. Does anyone know if these can be disassembled? I really want to take it apart for a thorough cleaning and sharpen the blade a bit. But because of the look of the handle, I’m not sure you can take it apart. That will be a deciding factor whether I continue with these pruners. A truly excellent pair of pruners will come apart for maintenance (cleaning, sharpening, protective oil, etc.). I do love them but the Virginian clay really beats them up. Thank you.

I clean my CBN wheels with an Art Gum earaser.

🇨🇦🇨🇦🇨🇦

belle vidéo, dommage qu'il insiste trop sur les gouges quand il les affutent, ça les fait chauffer, les gouges n'aiment pas trop, il faut absolument y aller par petit coup et en douceur.

studio.th-cam.com/users/videosjvSUnSTVTY/edit

2009 Nissan Pathfinder, used your tips, worked great! 2009 didn't have the same plastic shield so it was a bit simpler.

Good show & tell...BUTT. Why show sawing without protection ? PPE does work. Chaps, helmet system both are cheaper than an ER visit. Thimk. Safety Sally out. JMNSHO

@benjaminleslie3155•thats still really weak saw just invest in the 455-500i,$

Do y’all have this video in slow motion?

You can rewire your machine to run in reverse rotation, eliminating the burr problem on the one side. I rewired my Oregon 620-120, and it works very well. It takes two switches...one DPST to turn the grinder on and off, and another DPDT to reverse-rotate the motor. They both fit in place of the OEM rocker switch, although you'll need to fabricate a new switchplate out of sheetmetal with two round holes ~3\8" to accommodate the new switches. There's a fairly straightforward TH-cam online that explains how to do it.

Great video brother. I've been looking into getting either the 410 or 510 grinder. And of course there's the CBN wheel debate. Great info and good process. I've used a friend's grinder and boy oh boy it showed me how inconsistent my hand filling actually was.

Just a suggestion, whenever you feature a product in your videos, place a link to where you bought it so we know the exact one you bought and maybe where to get one? It would be another income source for you as well (affiliate links).

This worked man. Appreciate it.

Ms361 is better change my mind.

I'm with you

A great video, thanks for sharing

Use the pink stone for rakers

I think you got a carbide wheel for the carbide chains you might want to check that and send it back for a CBN wheel. The cleaning stone is like chalk you turn the machine on and turn it off again. Stick the cleaner to the wheel when the wheel stops its in good shape.

I had the 362 and I enjoyed it but it has the non Mtronic carburetor and so I traded it in for the 462c

how to change the blade

I cut my new c85 Husqvarna chain at 55-25-0 not 60-30-0 spent alot of time trying to copy a new chain and cut gullet a bit deeper,results are real nice,,on full chise chain.

I've been using the same CBN wheels as you for awhile now,never had to clean them yet,they cut cool,but I wish I bought 100 grit not 80, just alittle smoother finish on smaller chain. The 3/8 chain is no problem,

Let's do it

Great video! How is that new grinding wheel working for you? Is it picking up a lot of oil and junk or staying clean?

You guys want to come for an ice hunt?

Your 10° drop is made for chisel chain and semi chisel Oregon recommended for those 2 type of chain and then if you will look on your chain guide backside there should be a little screw you can set to make that guide tighter when you pull the arm😁😉

Thank you for the video. Worked great

That grinder is for home owners. All real cutters use Simington grinders

Thanks but idk how to do all that

I've had an MS250 for about a decade now. I've used it to clear my 1 acre in Florida (probably at least 70 - 80 trees, some of which were more than 100 ft tall and about 24" diameter. I also volunteer for hurricane cleanup and that's where it's seen the heaviest use. A few years ago when I was heading out to cleanup after Michael, I decided I wanted to upgrade so I bought an MS362 for some of the bigger stuff. I quickly discovered that the 362, while it is more powerful, it isn't really powerful enough to run anything more than a 20" bar and even that can be a bit iffy when cutting really dense stuff like Oak. I also make wood bowls and so have occasion to cut some larger pieces of hardwoods. I just always felt a little underwhelmed by the 362. A few months ago I found a good deal on a used 461 and decided to give it a go. Holy cow! That 461 will pull a 28" bar through basically anything and seems to barely break a sweat. I'm now looking at selling the 362. It isn't that it's a bad saw, but if I need something bigger than the 250, I don't see myself ever reaching for the 362 now.

I notice your not consistant with the amount of times you come down on each tooth.

No carb adjust!!! How will you get them tuned when the weather changes??? Oh, that’s right, all you have to do is a tooless recalibration procedure, takes about 45 seconds. Besides, I keep loosing my screwdriver.

Thamk you. This is my same problem after a deer smacked the front of the car. Shall do.

Yous a thin knife and prase up

Better then anything she would have said.

Nope! Anyway

Haha

I have the 362 , 400 ,and 261 m tronic

Does this mess the threads up

When I was younger, in my teens in the eighties, I started my dad's Poulan chainsaw the same way as you did. I was much stronger at that time than I am today. No, for many years. Yes, I continue to have all my fingers and limbs. I had so much fun using it to cut wood on the farm my family lived on. That property was sold possibly more than 5 years ago. Dutch people currently live there. I have so many interesting stories from that place.

Expensive hat. A 1400 plus dollar one of them. Wow.

Not to be negative here, but those boots are not great for this job. One slight touch and those rubber things are gone to the skin. Also a big round falling accidentally on your feet would crush your foot. The tops need to be sealed so you're not walking in fine dust packed into your socks all day. Nice saw though. Good exercise.