วีดีโอ

It sends a signal, but because SW2, the results would be like if you hit the firing button when SW2 is off on a standard PCB that doesn't have this Keep-Alive.

No need to install the wifi attenuator if you don't want, but it gives you the extra functionality to change things with your phone. About the installation of the full kit, this is the link with the official installation videos gpstartechnologies.com/pages/support-downloads

Yes, it will fit. GPStar is working on the mounts to fix it inside.

That's something we would like to try at some point.

If you are in the UK, we sell the Speaker Support Kit fruttotechnology.com/ols/products/speaker-support-kit If you are outside the UK, GPStar sells them gpstartechnologies.com/products/gpstar-speaker-support-kit

Sound at the beginning intentionally left out. Sound comes back at 2:42

That's right about the pack on until the battery dies. We don't recommend to leave it until that point as the battery lifespan could be shortened. You can't power down the pack with the wand if you have this mod, just with the main pack switch.

@@fruttotechnology so why have it if You can't power down the pack with the wand if you have this mod, just with the main pack switch?

@@GODCONVOYPRIME this mod is for anyone that wants to have the pack ON all the time, maybe walking for a long time without having to worry about the 3 minute autoshutdown of the pack, or the 30 seconds of the wand that will make the pack shutdown too if the wand is connected. Without the mod, you'll have to keep shooting or changing modes or intensity in the wand to keep the pack ON too.

Thanks for the tip, I'll do it.

That would have been another use, but the dimensions are based on a Cylon helmet, so it would be a bit larger to fit into the cyclotron area.

@@fruttotechnology oh sorry, originally I read that as a "cyclotron" LED bar! I've misspelled that word so many times, in so many ways, my brain automatically assumes I've done it again! 😅

@@tapmem no problem, it is very easy to mix them. At least you realized that before buying it :D

We haven't found an RGB bargraph yet, but we are selling this one that is Blue only. It can be used in the Attenuator, as Adam Savage used blue LEDs in that section, or in your GPStar wand kit, if you want to have another wand with a special bargraph.

@@fruttotechnology Fingers crossed that you guys find an RGB bargraph in the future. Feels like that would complete the trifecta of RGB bargraph, power cell, and cyclotron. Thanks for the info!

For the standalone version that includes the sequences here (contact us for more details): fruttotechnology.com/ols/products/28-segment-bargraph-pcb-for-spengler-neutrona-wand If you want the bargraph only without the sequences: fruttotechnology.com/ols/products/preorder-28-segment-bargraph-pcb-for-spengler-neutrona-wand

These are usually individual led's on the back. 2.7v drop for blue so at least around 3v. Limit current with resistor or active limiter if voltage is higher.

Do you mean each individual LED or the whole bargraph? We sell two options: the one for the Hasbro Neutrona Wand that will need connecting to the main board inside the wand. And the second option we can program so you only connect directly to a battery and it will do the bouncing sequence, and the firing sequence if you connect the switch. Is any of those two options what you want?

fruttotechnology.etsy.com/uk/listing/1456479470/high-quality-boba-fettmoff-gideon-led

It works even if you remove the purple connector from the wand, as it is just emulating a wand connection into the purple connector of the pack board.

Please go to the Etsy or eBay post and the first picture shows the detailed instructions

Con gusto!

Yes, that is correct, to change colours you need the both gpstar boards: the one for the pack and the one for the wand. To use it in red only, the wand board is not required.

Oi! Looks great!! What power were you running? D batteries or a usb talent cell? Also you wand doesn’t do the voltage drop when it turns on.. have you modded your wand?