วีดีโอ

It is entirely up to how much work and effort you want to put into it. The problem with that is when you get to any curve(which is almost all of it), you will have to be extremely precise. Cutting and shaping such small and thin pieces is not as easy as it seems. I would suggest just doing the planking how you want and see how it goes. If you can taper everything and get a nice look, great. If not, get it as close as you can and fill the gaps.

@@timsoyer3840 there are 2 versions that you get from loot, 32mm and 75mm. I printed the 75mm. The little piece comes in the files and just gives you the option of making it with 5 heads or 6. What kind of printer are you printing on and I’ll see if I can give you some tips. The more you print the easier it will get. If a moron like myself can figure it out, anyone can. So I have faith you will do just fine!

@ I have been trying to get my hands on a really good Teamat miniature. WizKid makes a really good one, but I got admit it’s close to $500 and I can’t afford it.. I got a really good one from Etsy, but I’m not 100% satisfied with it. It’s big enough and looks close to right.. but a couple of heads just a little too different. I saw another one on Etsy that looks really great, but I can’t get it anywhere anywhere near or big enough.. when I saw this in my files from loot. I will look at it for a moment. Thought it looked great, but was frustrated when I saw the extra head. Shrugged my shoulders and looked at the rest of the bundle.. every once in a while, I look around on TH-cam for new miniatures coming out. I often watch the Gallant goblin for that.. and I look for what’s new on the 3-D printing front. Somewhere in between I stumbled across your video and decided to watch the CEO. Well let’s take a look at how that miniature looks in my mouth almost hit the floor when I saw you able to take that extra head off and put a patch on the back.. I then started looking up your other videos and subscribed. I’m very excited at the prospect of being able to have this manager in my collection. I think I already own the files.. my library will print them for me if I send them the files. I’ve been meaning to try this service and I think this will be the time to do it.. I’ll have to pay for it but it’ll be a lot cheaper than $500. That’s for sure.. I paint most of my own miniatures. But I’ll tell you what if the price is right on the printing of this miniature I might just pop for a professional job on this one.. I have been collecting the WizKid’s adult dragons. I have about five of them so far.. and I’ve been getting ready to pull the trigger on one of the ancient ones. It’s almost Christmas. If I’m really lucky one of my family might’ve even got me one.. I have a few dragons also from reaper. I just received recently, my kicks daughter six from reaper, which had a couple really good dragons in it.. I don’t really know how to send any pictures on this. But if you drop me a hello or my email, I’ll happily send some pictures of my collection.. if you’re at all interested. Either way, thanks for getting back to me.. and I eagerly look forward to hearing your next video. Have a great day, man.

@@timsoyer3840 this is the 75mm version. You can do the 32 mm version as well which comes with the files. That extra piece is in the files as well. I didn’t realize what it was until after printing it. I would think the 32 mm would be printable on any printer. The 75 mm would have issues on any printer with less than a 10 inch build plate and a short z axis but that’s a guess on my part. I have a Jupiter and a Saturn 2 and printed all the 75 mm parts on both.

It ridiculous! Had a print fail on one part last night so, now have another reprint and pushing back another day before I can finish printing.

The more you print the more comfortable you will get with it. And yes I agree, figuring out where to put stuff is the biggest problem with making models lol.😂

@@darkvenom6666 it’s still printing. And I don’t tend to keep track of how much anything takes cuz that’s a lot of money I’m blowing through and if I don’t think about it, then it’s ok, lol!

Izatal 32 mm is about 2L 75mm id say would be upwoulds of 6-8L

Ross over at Fauxhammer mentioned it took 7-8 bottles of resin.

@ did he put out a video on it? If he did I’ll need to go check it out. He is where I get my printer info from. Love his channel.

@@NosterRex Tricky, it game up in a passing comment during his printer giveaway live stream last week. While talking about the M7 Max printer he mentioned this dragon was his test project for it and it took a LOT of resin.

@@scralph thank you

@@matheuscruz8981 thank you

I do the same. Got a box full of misprints lol. This is from LOOT STUDIOS, dec 24 release.

Depending on where you live, you can find a local hobby shop and see if anyone there prints. Sometimes folks will print if you buy the resin. Maybe a small fee depends on the person though. I think I’ve been printing for two weeks steady now and still have 4 more batches to go. 15 hours ish per batch so several more days to go.

@@Nurg1982 I have an elegoo Jupiter, and a Saturn 2 8k. But I am about to switch out my Saturn 2 for a Saturn 4 Ultra. I don’t own any fdm printers.

@@zeroa6 you and me both!! I hope I do it justice!

@@NosterRex Lol! I know you will!! Cheers

@@zeroa6 I’ve already been putting it to use. I’m absolutely loving it!

@@NosterRex Great! ¿what will you print next?

@ I’m already working on the LOOT STUDIOS December release of TIAMAT, 5 headed dragon. It’s going to be massive. Plus a bunch of dragon kin, smaller models.

@@NosterRex Awesome!!! I´ll see the video! Cheers!

@ thanks! Nice chatting with you!

You are most welcome! Thanks for watching.

@@quinnmehling9967 I never think anything I do is very good so that’ll never change lol. Thanks for the compliment though.

@@turboman93 he must be a really awesome guy to share things like that lol

The salt granules help to keep the two parts from sliding all over the place when you squeeze it all together.

Clever

The fact that your in Buenos Aires and seeing and commenting on this short is blowing my mind. I never think people around the world watch anything I post lol. Thank you!❤

lol

@@LeoA05 Whiteman AFB is where I believe it possibly heading. I believe my house is in the path of most military aircraft, because I see a lot of stuff flying over. FT Leonard-wood is is southwest and I see a few helo’s on that line.

@@gkeaton9755 Nice! You should post a video of what you end up with. Would love to see how other folks come up with! Thanks for watching and the compliment!

@@genojoe3176 I have not changed the fep in a while and they were out. I’m lucky the whole vat didn’t drain out though. Cuz that sat over night. Apparently the hole sealed against the LCD screen and kept it from draining out all over the place.

@@NosterRex Ouch!

@@fartinbrundle5495 I can’t remember if I left the part in where I had put clamps on the clamps or not. It’s been a min since I did that build. Plus I sprinkled little tiny finger clamps all over it!

What’s the stuff you sprinkled on before clamping?

@@fartinbrundle5495 salt. It acts as friction which keeps the boards from sliding around during glue up.

Thanks for that tip,I appreciate it.

It’s called “stick fast” CA adhesive. The thick kind, which they have thin medium and thick. Personally any thick super glue will do the job I think. Thanks for the compliment and thanks for watching!

@@NosterRex thanks so much mate just started printing the at at and realised how big it is! Would hate for the parts to fix properly

@@joshuawarne986 just a heads up, you may want to dry fit parts first, and see how well you can paint them, like where you can reach with a brush. The first one I put together to quick and couldn’t paint the interior. But painted it all in the second one.

@@NosterRex awesome good to know this will be the biggest print to date so thanks for the advice mate

@@joshuawarne986happy to help

@@genojoe3176 only 5 months old!! He sits and watches movies with me as well!! lol

@@johnsandquist5873 thank you for the comment!! I appreciate it.

That’s extremely difficult to say because I print such a wide range of figures. Some are small and others are massive. The large demon I believe took close to a full bottle (1kg). Plus the printing process has a very large amount of supports which takes up a lot of resin.

@@quinnmehling9967 I have a love hate relationship with it. Love it, but hate the ridiculous amount of grinding in it.

Oh I understand that. I liked some of the elements that it borrowed from other games. It’s little Helldiver’s, Destiny and Warframe.

@@quinnmehling9967 absolutely! More warframe with the builds than anything.

@@quinnmehling9967 if you get in game and need some help or just need someone to run with feel free to hit me up. I’m on PS5 and my gamer tag is Nosta Rex.

@@wilsonmachado8695 thanks for the compliment!!

I haven’t finished it yet, because the paint peeled off. So until I can figure out how to fix that, it’s kinda on hold. But I will finish it, and post the final look.

@@NosterRex thnx for your reply

@@wilsonmachado8695 I try to respond to every comment I get. A lot of the time it’s a simple “thanks” or something like that.

Thanks Joe!!! I can always count on some kind words from ya!!!

Thank you for the complement. I’m always super critical of all my models I finish and never think they are done very well.

I love it!! My old chair I could only sit in for about an hour before my back pain would become unbearable. I have worked all day several times since getting the new chair.

Is XL recommended for someone who weighs 180-190 lbs?

Personally I doubt you are big enough for a chair that size, but you can look at secret labs website and do some research.

@@anthonybashford274 dark fire designs

Just a little guy

Glad it helped!

I stopped playing that a few months ago so unfortunately I can’t say. But that kept happening and eventually made me quit playing.

@@NosterRex thank you for the update.