วีดีโอ

Perfect, ive changed out an axe head but ive seen videos where people try to hammer, tap the head down and it doesn't provide a tight fit. When hanging my axe handle i turned it upside down and tapped the bottom of the handle and it definitely drives it in further. I found an 8lb sledge in a toolbox drawer that's old snd I'm definitely gonna buy a new handle and mount it.

Paid by the hour i guess

This is Grade 4 math

Perfect i got an antique 12lb sledge. Thats split lengthwise but still in one piece for now.

عمل بطيئ جدا

what an awesome video. Thank you for taking the time to make the 3d blocks, it really helped!

most guys showing you this calculation forget to explain this simple equation, you got it dead on , thank you..

Bought my handle from Ace Hardware. My problem was I bought a handle that was too big and I tried to sand it down to fit. Did not go all the way down to where the thicker part of the handle starts. Broke off after a while of using it. My fault. Went back and bought a shorter handle with a narrower diameter. Still had to stand it down a little bit but was able to install the big fat wedge, and I used the old conical metal insert and not the two wedges. Get the head down to the beginning of the handle. Much much better. Your instructional video convinced me to not use the wedges. I was able to drive my shallow sand point well on our cabin property up north without having the head fly off. So that's good. Thank you for the video.

I see you don't have no springs in plies that mean you know what tie

Round turn figure 8

So many expert rebar tiers lmao. Just to let you know a monkey could be trained to do the same job for a few meals and a bottle of whisky each day

Great video got it done as quick as this video was

Que precio tienen esas pistolas

Thanks. I am a New Intern at a Jobsite in Austin and this immensely helped.

Weak

Hold the world

Zip tie it. it won't matter once the concrete is poured.

Thank you

Literally probably was the only way I could comprehend this used to do construction so it’s way easier to understand then regular classes

Why it on the ground in the first place ha ha ha. I work with alot of noobs who think it's ok to put their harness on the ground. The way I was bought up in Industrial construction I never put my harness on the ground. Oh weld.

A spade bit is best for removal

How much gun time do you have with RE 500 after you pull the trigger?

A single snap tie at the top is better than your double figure 8 with a wrap on footings

I wish every instructional video was as efficient as this one.

🎉🎉 correct

You weak

And that’s how it’s done. A work of art

Thank you! I found a box of hy-200r's in a garage clean out but I couldn't find what cartridge it goes in. I really appreciate it

My guy doing templates, double wire, with the hook in the beginning, plus did nice tugs, plus the tie using the pliers to tug down off the rebar with a twist, then cutting off access wire and tapping it down...perfection.

can u step on it and climb?

Exept way faster.

This is hoyoma hammer?

Wow, you made this really easy.

TOP Fing NOTCH.. straight forward info

Thanks. Just finished. Very helpful video.

Snap with a wrap on the vertical works as well. Faster also

The judge in Caddyshack : “Well…the world needs ditch diggers too” 🤣😂🤣😂

Too slow and your tails are too long mr 101.

🤦‍♂️ use more pliers and less hand to grab wire.

To slow pack bar labor for the real rodbusters

Use your pliers to throw the wire around the vertical and then grab the wire with your pliers, snap it against the bar to take the slack out of the wire and hug the bar better, in the long run less over twisting, over prying which gives you some speed

Figure 8 with a wrap

true

I got hired on as Labour 2 And 28 story job, i know nothing Hardest part is talking to god in the sky Im Imtimidated Im 4 days in Rookie Green Help please, i can handle Bucketguy on the concrete transfers, had it after first load.. Is my boss crazy or should i stick too it. Thanks

When you first insert a new cartridge into the tube adapter, are you supposed to open it some way at the end where the glue come out? I’m currently trying to figure out if I’m supposed to pop it at the end before I start squeezing out glue, or if you just insert and start cranking down until it squirts out

Good stuff

Cast in place concrete 😎👌

Dude you’re the best!

Short and concise...nice

Beautiful